aft-refman.aft

#--- Below are some pragmas that affect how this document is processed.
#--- 
#--- Aft's graphic logo:
#---SET aftimage=aft.jpg
#--- SET-HTML aftimage=aft.gif
#--- SET-LaTeX aftimage=aft.jpg
#---  
#--- Something to distinguish tabs from the regular text (in examples):
#---SET-HTML tab=<font color="magenta">{tab}</font>
#---SET-LaTeX tab=[tab]
#--- 
#--- Specifically, for the tab symbol above, we want to interpolate variables
#--- in verbatim mode:
#---SET-CONTROL expandinverbatim=yes
#--- 
#--- End of Pragmas. Start of Document!

*Title: Almost Free Text (AFT) Reference Manual
*Author: Todd A. Coram

			Version 5.98
			~revised 09/09/2010~

*Image-center: %aftimage%

---------------

*TOC

-----------------

* Introduction

This document exists as a simple reference manual for the AFT. It is
not meant to be used as a tutorial. [Note: That's not quite true. \
If you read this in a linear fashion, it's a bit like a tutorial!]

AFT is a ''nearly'' free
format documentation system which can be typed in using any editor or
wordprocessor that supports tabs or ''hard spaces'' (column-based spaces whose
number doesn't shrink or grow based on formatting).  By using AFT, you are no
longer constrained to one wordprocessing file standard (such as
Microsoft Word), nor do you have to enter a plethora of weird
syntactical incantations of an ''embedded'' mark up language (such as
LaTeX or HTML). =[^LaTeX]=  =[^HTML]=
[Note: LaTeX and HTML are the major mark up languages \
supported; there is lesser support for other formats -- mileage may vary.]

Unlike other mark up languages, AFT is designed to parse and recognize
''patterns'' rather than formal commands. That is why there is no
single ''escape'' or command sequence that tells AFT what to do.  In
this regard, AFT will process almost anything you throw at it.

An AFT document is easily converted into such popular formats as HTML,
RTF and LaTeX.  Because there are few commands, learning to write a
document in AFT requires little effort.  This doesn't mean that AFT
is not powerful.  In fact, this very document was conceived and
written using AFT.

** How to Read this Document

In this document, ''user entered text'' is set in |teletype|.
Everywhere you see the sequence |%tab%|, this is just a way of showing
that the user is expected to press a ''tab'' key (or enter 8 consecutive
spaces). See [Tab Modes] for instructions on how you can set ''tabs'' to
''any'' number of consecutive spaces.

Each command introduced will begin with a description and then will be
followed by one or more examples of the command as it would be
entered. In most cases, the actually result of the command is shown.

* Running AFT

=[^aft usage]=
Running AFT is as simple as typing:

	aft NAME_OF_YOUR_FILE.aft

Replace |NAME__OF__YOUR__FILE| with the full path of your file. It
should end with |.aft| although that is not a rule.  You can also give
multiple file names too. AFT will, by default, use the first
supplied file name as a basis for the name of the output file.
The name of the output file will have an extension that reflects the
default designated output type.  This default was chosen when you
first installed AFT.

There are a few more parameters that can be supplied to AFT. Here is
what AFT prints out if you don't give it any arguments:

	aft [--verbose] [--autonumber] [--output=file | --output=-] [--type=output_type] infile ..

Everything enclosed in |[]| is optional.  Where you see a bar '|'
indicates that you can supply one of the two parameters on either
side. 

Here is a breakdown of each parameter:

	[--verbose] Generate a lot of commentary. By default, AFT will just
	      silently process files (unless errors occur). Using this option
	      causes AFT to keep you informed about what it is doing.
	[--autonumber] This switch tells AFT to automatically number your
	      sections.
	[--output=file | --output=-] This tells AFT where to send its
	       processed output. You can supply a filename (file)
	       or |-| which tells  AFT to write to your standard
	       output (your display or |stdout|).
	[--type=output__type] This tells AFT what type of output to
	       do. For example HTML output is used for |html| and
	       DocBook  output is used for |docbook|.  As a side effect,
	       this will also specify the file name extension for the
	       output file if the |--output| option isn't specified.
	[infile ..] One or more AFT documents to be processed.

It is very unlikely that AFT will display errors. Since this is a
''mostly free'' text parser, nothing in your source document will ever
be syntactically incorrect.  In most cases, AFT will produce perfectly parsable
output. But, remember: ''garbage in, garbage out''.

* AFT Text: An Example

The following text represents typical input to the AFT parser:

^<<
 *Title: Musical Categorization
 *Author: Alfred Theodore Franti

%tab%# I am an optimist. From where it is, music is mostly alright,
%tab%  or at least in a healthy state for the future, in spite of
%tab%  the fact that it may sound as though it is being held
%tab%  hostage. --- Duke Ellington

There are many ''flavors'' of music to choose from. Indeed, music is a
lot like food: different tastes for different folks.  But, what are
the ''flavors'' that music comes in?  Here is a short, not nearly
comprehensive list:

%tab%* Jazz
%tab%* Classical
%tab%* Blues
%tab%* Country
%tab%* Folk
%tab%* Rock
%tab%* Rap
%tab%* R&B
%tab%* Soul

There are many others categories and sub-categories that I have failed
to mention.
^>>

After we run this text through AFT, we get:


		_Musical Categorization_
		_Alfred Theodore Franti_

	# I am an optimist. From where it is, music is mostly alright,
	  or at least in a healthy state for the future, in spite of
	  the fact that it may sound as though it is being held
	  hostage. --- Duke Ellington

There are many ''flavors'' of music to choose from. Indeed, music is a
lot like food: different tastes for different folks.  But, what are
the ''flavors' that music comes in?  Here is a short, not nearly
comprehensive list:

	* Jazz
	* Classical
	* Blues
	* Country
	* Folk
	* Rock
	* Rap
	* R&B
	* Soul

There are many others categories and sub-categories that I have failed
to mention.

------------------------------------------

* Syntax Overview

AFT processes your input file one line at a time. A line is a chunk of text
terminated by a newline, carriage return or whatever combination of the two
that is native to your operating system (don't worry, your text editor handles
it all behind the scenes for you). 

** Line Continuations
If the last character on your line is a
backslash |\ |, then the next line is taken as a continuation of your 
current line and all of the AFTish things that are done on a line-by-line 
basis are now applied to to all of the lines ''continued'' with backslashes.

This is terribly useful when you present AFT with text that may have
been ''wrapped'' by your text editor (because the line was too long):
	 Here is a long URL typed across 2 lines: http://www.maplefish\ 
	.com/todd/aft.html

''produces''

 Here is a long URL typed across 2 lines: http://www.maplefish\
.com/todd/aft.html

After a full line (continuations included) has been parsed, AFT
determines whether the line is part of a special mode. The modes of
AFT are:
	#. Paragraph - the normal mode.
	#. List - a tab mode.
	#. Verbatim - a tab mode.
	#. BlockVerbatim - a special mode between |^<<| and |^>>|.
	#. Quote - a tab mode.
	#. Centered - a tab mode.
	#. Table - a tab mode.

** Modes

Sections are treated as temporary ''one shot'' modes. After a
sectional change occurs, you re-enter paragraph mode. Other modes can
be thought of as ''sticky'' (you can enter a mode and stick
indefinitely in that mode).

An empty line terminates most modes and takes you back to paragraph
mode.

** Special characters

Any line beginning with a |#| probably signifies that [Comments],
[SET] controls or [Pragmas] follow.

A line beginning with a |*| is sectional. That is, [Sections], [TOC],
or [Images] follow.

** Line Filtering

AFT
tries to apply ''prefilters'' from the rule file (|.dat| file), then
it searches and replaces [Targets and References], and performs [Font
Faces] tricks. After the line has been completely brutalized by AFT,
''postfilters'' are applied.


* Sections

All sections start with at least 1 (but no more than 7) stars |*| in
the leftmost column of a line.  Each star represents a section
level. With the exception of special sections ([Special Sections]),
a space can follow the final star before the section name.
The section name is terminated by a line break.
_Warning:_ ''Trailing spaces are considered part of the section name.''

	 * This is a Top Level Section
	 **This is a Second Level Section

Here we can see how the various section levels nest:

** Section 2
=[^HTML]=
While HTML supports 6 section levels, we can't expect this level of support
from every target.

*** Section 3
Here we see Section 3.

**** Section 4
And now Section 4. This is pretty deep nesting. Do you want to go lower?

***** Section 5

Starting with Section 5, the text body begins to indent. This carries until
the end of the section. [Note: From Section 5 down to Section 7, won't show \
up in the table of contents... thank goodness.]

	#. Lists are indented too!
	#. Everything is indented.

****** Section 6

We are starting to get really nested here. Beware!
	#. You really should consider restructuring your text.
	#. Do you really need this many nested sections?

******* Section 7

This is as deep as we go. This shouldn't show up in the table of contents.


** Special Sections

AFT has a few reserved section names. These are used to provide
special services that can be logically considered ''section''
based. All special sections consist of one star |*| followed
immediately by the section name.

*** Titles and Authors

The title of the document can be signified by using the section name
|*Title:| followed (optionally) by a space and the title name.

	 *Title: Almost Free Text (AFT) Reference Manual

The author of the document follows a similar format. Instead of
|*Title:|, you enter |*Author|

	 *Author: Todd A. Coram

=[^HTML]=
If |*Title:| and |*Author:| are the first two (non-comment) lines in the
document, they will be used in the document preamble. This is useful for
formats such as HTML which would like to have the title of the document
in  the 'header' rather than 'body'.

*** TOC

|*TOC:|, or Table of Contents, is used to automatically generate a table
of contents section for your document.  The table of contents is
populated by names from [Sections].

If need to collect your own table of contents information (for
output that doesn't automatically generate it -- such as HTML), then
you should run the |aft| command on your source files twice. The first pass
produces a special table of contents file and the second pass inserts that
special file.


	 *TOC

*** Images

#---SET-CONTROL expandinverbatim=no

A very simple image importing facility is available in AFT.  
The |*Image| command is followed by the name of an image file that is to
be incorporated into the document, replacing the line where the
command appears. 

	 *Image: %aftimage%

The above line will insert the file |%aftimage%|:

*Image: %aftimage%

There are a few variations on |*Image:|. You can suggest how the image should
be placed in the document with the following commands:
	* |*Image-left:|
	* |*Image-center:|
	* |*Image-right:|

The results are as follows:

	 *Image-left: %aftimage%

*Image-left: %aftimage%

	 *Image-center: %aftimage%

*Image-center: %aftimage%

	 *Image-right: %aftimage%

*Image-right: %aftimage%


You can also use |*Image:| to cascade images:

	 *Image: %aftimage%
	 *Image: %aftimage%
	 *Image: %aftimage%

*Image: %aftimage%
*Image: %aftimage%
*Image: %aftimage%

#---SET-CONTROL expandinverbatim=yes

* Tab Modes

While processing your document, AFT may enter certain ''modes''. The
most common mode is ''Tab Mode''. Requesting tab mode is requested by
entering a ''tab'' (%tab%) character as the first character in a line.
A tab mode ends at the first line encountered that ''does not'' begin
with a tab character. This includes blank (empty) lines.

If you cannot type ''tabs'', you can use spaces instead. By default, AFT
will interpret every 8 consecutive spaces as tabs. You can change this
default by using the command:

	 #---TABSTOP=N

where |N| is the number of spaces you wish to represent tabs.

Examples:
	 #---TABSTOP=4
	 #---TABSTOP=8


** Lists

Lists are the most popular tab modes.  A list element is identified as
any line containing a initial tab and followed immediately by one of
the following character sequences =[(list sequences)]=:

	[{+Enumerated+} Element] Any number of digits followed by a |.| or |)|.
	[{+Bullet+} Element] A single star |*|.
	[[Named] Element] A left bracket |[| followed by text and
	   ending with a right bracket |]|.
	[{+Nested+}] One or more tab characters.

You may mix and match list element types. However, each time you
change type, you are effectively starting a new ''list group''.

In addition, each list element in a list group must immediately follow the last
 element. There cannot be any blank lines between elements.

	 %tab%1. This is the first element.
	 
	 %tab%2. This is NOT the second element.

''produces''

	1. This is the first element.

	2. This is NOT the second element.

*** Tab Continuations

If a tab element doesn't fit physically on the same line you are
entering, it may be continued by entering a new line, a tab and any
character not present in the [list sequences] described
above. However, it is recommended that you simple use a single space
in order to keep your lists consistent.

	 %tab%* This is the first physical line in the element.
	 %tab%  This is the second physical line in the element.
	 %tab%* This is a new element.

''produces''

	* This is the first physical line in the element.
	 This is the second physical line in the element.
	* This is a new element.

You can also take advantage of AFTs parsing syntax described in
[Syntax Overview] and do the following:
	 %tab%* This is the first physical line in the element.\ 
	 This is the second physical line in the element.
	 %tab%* This is a new element.

''produces''

	* This is the first physical line in the element.\
This is the second physical line in the element.
	* This is a new element.

but looks rather awkward...

*** Enumerated

An enumerated list element is indicated by any number of digits
followed by a |.| or |)|.  The actual number is ignored. The list is
always enumerated starting at |1|. If you find that choosing numbers
is too much trouble (especially since AFT ignores them), you can replace
the number with |#| (i.e. |#)| or |#.|).

	 1. First thing is first.
	 3. Third thing is always second.
	 #) Oh, I give up. You chose the numbering.

''produces''

	1. First thing is first.
	3. Third thing is always second.
	#) Oh, I give up. You chose the numbering.

If you want to control the numbering, then use a [Named] list with
your numbers as the names.

*** Bullet

A bullet list element is indicated by the presence of a single star |*|.

	 %tab%* My gawd. It's full of stars.
	 %tab%* Actually, sir, it is just a single star.

''produces''

	* My gawd. It's full of stars.
	* Actually, sir, it is just a single star.


*** Named

A named list element is indicated by  a left brack |[| followed by
text (the ''name'') and ending with a right bracket |]|.  The text
following this indicator is supplemental.

	 %tab%[Aardvark] A small mammal that munches ants.
	 %tab%[Ant] A small creature munched upon by aardvarks.

''produces''

	[Aardvark] A small mammal that munches ants.
	[Ant] A small creature munched upon by aardvarks.

*** Nested

Lists can nest.  Nesting modes are managed automatically by AFT. You
can freely enter and exit nesting levels at will.  A Nested list is
indicated by an additional tab followed by any of the 
[list sequences]. The same rule for [Tab Continuations] apply.

	 %tab% * List, at level 1.
	 %tab% * Another item at level 1
	 %tab%%tab% with a continuation.
	 %tab%%tab% 1. a level 2 item.
	 %tab%%tab% 2. another level 2 item.
	 %tab%%tab%%tab% * A level 3 item.
	 %tab%%tab% 3. the third level 2 item.
	 %tab%%tab%%tab% * A special level 3 item.
	 %tab%%tab%%tab% * More special level 3 items.
	 %tab% * Back to level 1.
	 %tab%%tab% * A new level 2 list.
	 %tab%%tab%%tab% 1. A new level 3.
	 %tab% 1. A new level 1.
	 %tab% 2. Got another level 1.

''produces''

	* List, at level 1.
	* Another item at level 1
		with a continuation.
		1. a level 2 item.
		2. another level 2 item.
			* A level 3 item.
		3. the third level 2 item.
			* A special level 3 item.
			* More special level 3 items.
	* Back to level 1.
		* A new level 2 list.
			1. A new level 3.
	1. A new level 1.
	2. Got another level 1.


**  Other Tab Modes

Aside from [Lists], there are a couple of other tab modes.

*** Quoted Text

Want to enter simple verse or a quote? This is a very simple mode.  It
is indicated by a tab immediately followed by |#|.
Any following lines (preceded by one or more tabs) are considered part of the
quote.

	 %tab%# You're _damned_ if you do; 
	 %tab%You're _damned_ if you don't. - Bart Simpson

''produces''

	# You're _damned_ if you do; 
	You're _damned_ if you don't. - Bart Simpson

*** Verbatim Modes

Verbatim mode is the ''catch all'' tab mode. Any entry into a tab
mode that doesn't look like [Lists], [Centered Lines], [Tables]
or [Quoted Text] is considered 
''verbatim'' text and will appear in the output in a |teletype| font
with limited processing of text.  Line breaks are always honored in
this mode.

There are two flavors of verbatim text: [Tabbed] and
[Literal]. Each of these flavors will, in general, cause text to
appear as it was written.

**** Tabbed

A tabbed verbatim mode is entered under the rules of [Tab Modes] and
are limited to any sequence that doesn't fall under [Lists].

	 %tab% 1. This line enters tabbed verbatim mode and not list
	 %tab%    mode because it starts with a space.
	 %tab%
	 %tab%Tabbed verbatim mode retains
	 %tab%%tab%hard carriage returns, spaces,
	 %tab%%tab%tabs and other drudge.

''produces''

	  1. This line enters tabbed verbatim mode and not list
	     mode because it starts with a space.
	 
	 Tabbed verbatim mode retains
	 	hard carriage returns, spaces,
	 		tabs and other drudge.


**** Literal

This is a very special kind of verbatim mode. It isn't legally a tab
mode, but allows you to forgo all of the initial tabs that you must
type in order to stay in tab mode.  Literal mode begins with the
character sequence |^<<| as the first characters in a line and ends
with the character sequence |^>>| as the first characters in a line.

	^<<
	while (<RF>) {
	  chop;
	  $lcnt++;               # increment the line count
	  /^(\s*\#|\Z)/ && next; # Skip comment lines
	  doStuff();
	}
	^>>

''produces''

^<<
while (<RF>) {
  chop;
  $lcnt++;               # increment the line count
  /^(\s*\#|\Z)/ && next; # Skip comment lines
  doStuff();
}
^>>

A special modifier on the literal sequence allows us to apply
''filtering'' to the literal text. That means that the actual layout
of the entered text is retained, but we can apply commands such as
font changes to the text. This is indicated by typing the word
|Filter| or |filter| immediately after |^<<|.

	^<<Filter
	_while_ (<RF>) {
	  _chop_;
	  $lcnt++;               ''# increment the line count''
	  /^(\s*\#|\Z)/ && _next_; ''# Skip comment lines''
	  doStuff();
	}
	^>>

''produces''

^<<Filter
_while_ (<RF>) {
  _chop_;
  $lcnt++;               ''# increment the line count''
  /^(\s*\#|\Z)/ && _next_; ''# Skip comment lines''
  doStuff();
}
^>>

* Presentation

AFT offers the user very little control over the explicit layout of
the produced document. This limitation is a trade-off for ease of
use. AFT is not meant to produce ''flyers'' or ''slick sheets'' or
documents with strong page layout requirements.

With this in mind, there are a few niceties provided to help you
with some level of control over your document layout.

** Paragraphs

All paragraphs are ended by a single ''blank'' (empty) line.

** Page breaks

The traditional form-feed character ^L (Control L) can be used to
explicitly break pages.

** Centered Lines

A line of text can be centered by modifying the [Tab Modes] rule a
bit.  If you are not in the middle of a [Lists], [Tables],
[Verbatim(Verbatim Modes)], or [Quoted Text], then you could enter
a ''centered'' line.

A centered line is a line of text preceded by 2 or more tabs.

	 %tab%%tab%%tab%Hey, I am the Center of the Universe.
	 %tab%%tab%I am pretty self-centered too.
	 %tab% Keep in mind.
	 %tab%%tab%You can't center while in a tab mode.

''produces''

			Hey, I am the Center of the Universe.
		I am pretty self-centered too.
	 Keep in mind.
		You can't center while in a tab mode.



** Separator Lines

A single horizontal line can be produced by typing at least 4 dashes
on a line by itself. You should add a blank line before and after the
dashes in order to insert line breaks.

	 What is above.
	 
	 --------------------------
	
	 Must never go below.

''produces''

What is above.

--------------------------

Must never go below.

** Font Faces

=[^fonts]=
AFT doesn't allow you to change your fonts, that is left up to
configuration of your Web browser (for HTML) or TeX installation (for
LaTeX).  However, AFT will allow you to change your font's ''face''.

AFT's typeface scanner works on a line by line basis.  In order to
change the face of a piece of text, you must surround it with AFT font
command sequences.  The beginning and ending sequences must appear on
the same physical line.  

	 He was quite _bold and daring_ in his criticism.
	 He was quite _bold and
	 daring_ in his criticism.

''produces''

He was quite _bold and daring_ in his criticism.
He was quite _bold and
daring_ in his criticism.


An exception to this rule is when you want to
change a paragraph (or multiple lines) of text. In this case, you place
the beginning font command sequence as the first characters in the
first line and place the ending command sequences as the last
characters in the last line.

	 _Warning. Do not touch here. Touching here could cause
	 severe pain and possibly death.
	 You have been warned. So don't touch here._

''produces''

_Warning. Do not touch here. Touching here could cause
severe pain and possibly death.
You have been warned. So don't touch here._


*** Bold

Bolded text is surrounded by the character |_|.  If you wish to
include this character literally in your text, then you must break
your physical line so that it only appears once, or you can double up
the |_| character.

	 _This is your brain on bold._  This__is__not__your__brain__on__bold.

''produces''

_This is your brain on bold._  This__is__not__your__brain__on__bold.

*** Italics

Italicized text is surrounded by the character sequence |''|. If you
wish to include this sequence literally in your text, then you must break
your physical line so that it only appears once, or you can double up
the |''| sequence.

	''It was quite droll''.  ``This isn't droll at all''''.

''produces''

''It was quite droll''.  ``This isn't droll at all''''.


*** Teletype and Small Text

Teletyped text is surrounded by the character |\||.  If you wish to
include this character literally in your text, then you must break
your physical line so that it only appears once, or you can double up
the |\|| character or precede the pipe with a backslash |\ |.  
Small text works the same way, 
except it uses |~|.

	 |int small__number = 1 \| 2;| ~# this holds a small number \~ (1 or 2).~

''produces''

|int small__number = 1 \| 2;| ~# this holds a small number \~ (1 or 2).~


* Targets and References

=[^LaTeX]=  =[^HTML]=
HyperText is supported for HTML and References are supported for
printed output such as LaTeX. Both use the same command sequences.

** Targets

Targets are anchor points in a document, often referenced by [References].
Targets take the form: 
	=[text]=
or
	=[(text)]=

The difference being that the former ''inserts'' the text at the point of
the target while the latter (with parenthesis), provides just a reference
point without inserting the text.

The |text| is used by [References].


Here are a couple of examples:
	=[Does your dog bite?]=  No, my dog doesn't bite.

	=[(Ow, he bit me!)]= That... is not my dog.

''produces''

=[Does your dog bite?]=  No, my dog doesn't bite.

=[(Ow, he bit me!)]= That... is not my dog.

** References

A reference takes one of three forms:

	Form #1 [text]
	Form #2 [text (reference_text)]
	Form #3 [text (url:reference_text)] or [text (:reference_text)]

where |text| references [target (Targets)], unless specific |reference_text| is
is supplied (and in that case, |reference_text| refers to [target (Targets)].

The first form (#1) is the simplest. It refers to a target in the same document
file. The second form (#2) allows arbitrary text to be used. The third
form (#3) allows arbitrary text to refer to outside URLs. |url| may be
|ftp|, |http|, |https|, |mailto| just omit it (leaving the ':') for relative
http references. If you want to embed URLs directly into
your document, you can dispose of the brackets altogether. 
(See [URL Targets]).

Here we refer to targets set up in [Targets]:

	 [Ask about the dog (Does your dog bite?)]!

	 [Ow, he bit me!]

	See [how to avoid dog bites (http://www.hsus.org/ace/11858)].

''produces''

[Ask about the dog (Does your dog bite?)]!

[Ow, he bit me!]

See [how to avoid dog bites (http://www.hsus.org/ace/11858)].

But, what if you want to include plain old bracketed text like \[Coram97] that 
isn't a link? You can break the bracketed text into two
lines:
	 [Coram97
	 ]
but that many introduce unwanted space after 97 (i.e. [Coram97
]).


So, you probably want to ''escape'' the bracket with a backslash |\ |:
	\[not a link nor does it have any unwanted spaces]

Because, this is \[not a link nor does it have any unwanted spaces].

** URL Targets

If you want to just want to supply plain old |URL| targets, you don't need
to use any special markup. You just type in the address. AFT doesn't recognize
sophisticated URL naming when using this feature. You need to keep it simple
(e.g. URLs containing parens or complex http parameters should be avoided).

For example:
	 * http://www.maplefish.com/todd is my home page.
	 * (http://www.maplefish.com/todd)

''produces''

	* http://www.maplefish.com/todd is my home page.
	* (http://www.maplefish.com/todd)


** Targets (Deprecated)

A target begins with a _right_ curly brace |}| followed by a
visibility indicator, the target text and ends with a _left_ curly
brace |{|.

There are two visibility indicators:
	1. Visible target indicator |+|.
	2. Invisible target indicator |-|.

Visible target indicators cause the target text to appear in your text
output, while invisible target indicators hide your target text.

	}-Important Information-{  My dog may bite.
	}+Very Important Information+{: My dog bites.

}-Important Information-{  My dog may bite.
}+Very Important Information+{: My dog bites.

You should choose target text that have no AFT mark up or special
characters in them. Keep them short and safe.

** References (Deprecated)

A reference begins with a _left_ curly brace |{| followed by a
visibility indicator, text, an optional target text and
ends with a _right_ curly brace |}|.

There are two visibility indicators:
	1. Full Visible target indicator |+|.
	2. Half visible target indicator |-|.

The first is used when the reference text _is_ the target text.
The second indicator is used along with a |@| character to indicate
that target text will be supplied but shouldn't be visible. The
form for this is |visible text@invisible target text|

	 {+Important Information+} is worth reading.
	 {-Information@Very Important Information-} is available.

{+Important Information+} is worth reading.
{-Information@Very Important Information-} is available.

** URL Targets (Deprecated)

URL target references can be provided by using
one of these several forms.

	1. URL addresses. Use |http:|, |file:|, |ftp:| or |mailto:| in the
	   target name.
	2. Local files. Use |text@:filename| or
	   |text@:filename#target|.

Here are few examples.

	  * {+http://www.maplefish.com/todd+}
	  * {-AFT Home Page@http://www.maplefish.com/todd-}
	  * {-AFT Reference Manual Source@:aft-refman.aft-}
	  * {-AFT HyperText Info@:aft-refman.html#URL Targets-}

''produces''

	* {+http://www.maplefish.com/todd+}
	* {-AFT Home Page@http://www.maplefish.com/todd-}
	* {-AFT Reference Manual Source@:aft-refman.aft-}
	* {-AFT HyperText Info@:aft-refman.html#URL Targets-}



* Miscellaneous

** Indexing

This is an experimental new feature. It has not been determined if
supporting indexing for AFT-sized documents is a useful thing.

However, if you are looking for the ability to provide more precise
referencing than [Sections], then indexing may be it.

Indexing capability is provided by simply providing target style
mark up near the word you wish to index.  For example: 
=[^contrived example]=
^<<
	For example: (look in the index for this...)
        =[^contrived example]=
^>>

The above example is indexed under the term ''example''.  An index is
just a target with a caret (|^|) preceding the term.  However, unlike true
targets, the term does not appear in the text.

=[^LaTeX]=  =[^HTML]=
If you have marked an index, then at the end of your document an Index
section will be automatically generated. [Note: This is currently only \
supported for HTML and LaTeX. For LaTeX, you must run |makeindex| to \
create the index.]

** Footnotes (Endnotes)

=[^HTML]=
AFT has a very simple ''footnote'' facility (for systems like HTML,
where true page-footer notes are not available, they are treated as
''end notes'').

Footnote syntax is a variation upon [References]. You indicate a
footnote by starting a reference with '|\[Note:|'. All text following
|Note:| up to a terminating brace |]| is taken as the footnote. For
example:

	 Footnote syntax is a variation upon references.[Note: This \ 
	 is just a note about footnotes. You can go back \ 
	 to reading the manual now.] Okay?

''produces''

Footnote syntax is a variation upon references.[Note: This \
is just a note about footnotes. You can go back \
to reading the manual now.] Okay?

In the above example we also showed how long footnotes (most will
probably exceed a lines length) can be broken up using [Line Continuations].

** Tables

A very simple table facility is provided with AFT.  A table mode is introduced
with a tab followed by a |!|.  Any line not starting with this sequence terminates
the table.

A table consists of the following parts, in the following order:

	1. Caption.
	2. Headers.
	3. Data elements.
 
Header items and Data elements are separated by a single |!|.
Any table Header or Data elements entry that consists of fewer than 2 items
generate a warning and are ignored.

You can use !-------! to separate table rows (this improves the AFT source document readability).

For example:

	 %tab%! _Very_ Important Dates!
	 %tab%!-----------------------!
	 %tab%! Year ! Month ! Day    !
	 %tab%!-----------------------!
	 %tab%! 1966 ! Oct   ! 9      !
	 %tab%! 1999 ! Dec   ! 31     !
	 %tab%! 2000 ! Jan   ! 1      !

produces

	! _Very_ Important Dates!
	!-----------------------!
	! Year ! Month ! Day    !
	!-----------------------!
	! 1966 ! Oct   ! 9      !
	! 1999 ! Dec   ! 31     !
	! 2000 ! Jan   ! 1      !

*** Row Spanning

Trying to fit long text onto a single line looks pretty ugly using the default
Table mode. A small improvement in layout can be had by introducing the
pragma |#---SET-CONTROL tableparser=new|.
When this pragma is in effect, you _must_ use line separators |-----| between
rows. This is what will tell AFT that you are done with a row.

So, now you can do something like:
^<<
 #---SET-CONTROL tableparser=new

	! _Very_ Important Dates     !
	!----------------------------!
	! Year ! Month ! Day         !
	!----------------------------!
	! 1966 ! Oct   ! 9  (Todd's  !
	!      !       ! Birthday.   !
	!      !       ! Bring gifts)!
	!----------------------------!
	! 1999 ! Dec   ! 31          !
	!----------------------------!
	! 2000 ! Jan   ! 1           !
	!----------------------------!
^>>

to produce:

#---SET-CONTROL tableparser=new

	! _Very_ Important Dates     !
	!----------------------------!
	! Year ! Month ! Day         !
	!----------------------------!
	! 1966 ! Oct   ! 9  (Todd's  !
	!      !       ! Birthday.   !
	!      !       ! Bring gifts)!
	!----------------------------!
	! 1999 ! Dec   ! 31          !
	!----------------------------!
	! 2000 ! Jan   ! 1           !
	!----------------------------!


** Comments

If you want to type in text that will NOT be processed by AFT, then
you simply preface each line, that you want to be ignored, with
a |C| or |#| followed by 3 or more dashes |-|.

	 #------ This line is an AFT comment.
	 Maroc Ddot is 
	 C------ Todd Coram! The secret is out!
	 unknown.

''produces''

#------ This line is an AFT comment.
Maroc Ddot is 
C------ Todd Coram! The secret is out!
unknown.

** Pragmas
Ah, pragmas. For those of you unsatisfied with the text manipulation of plain
old AFT, you can dive into its dark corners with the following pragma features.


*** PASS

If AFT doesn't support a feature of the targeted output format, you can cheat
and embed markup that is passed through directly.  This is done by using
the |#--PASS-xxx| command, where |xxx| is the |ID| of the output format. 
The |ID| can be found in the AFT ''dat'' file used to describe the 
output format.

=[^HTML]=
For example, the following pass through will output raw HTML ''only'' when
the targetted output format is HTML:

	 Is this
	 #---PASS-TROFF // Troff silliness not supported yet!
	 #---PASS-HTML <font color=red size="+1">
	 red
	 #---PASS-HTML </font>
	 ?

Is this 
#---PASS-TROFF // Troff silliness not supported yet!
#---PASS-HTML <font color=red size="+1">
red
#---PASS-HTML </font>
?

*** SET

#---SET-CONTROL expandinverbatim=no

|#---SET| is used to assign a chunk of text (including AFT markup) to a variable
that can be freely referred to and expanded throughout your document. (If you
are an AFT hacker and have peered into the *.dat files, you may see |#---SET|
is use there too.)

The format of |SET| is:
	 #---SET variable=text

Throughout your document, |variable| can be referenced as ''%''|variable|''%'' and will be
replaced by |text|.

Before you get too excited, note that |SET| only works for one line of text. 
Here is an example:
	 #---SET aftimage=aft.gif
	 *Image-center: %aftimage%

The advantage here is that you only have to modify |aftimage| if you wish
to refer to a different image file and all expansions of ''%''|aftimage|''%'' will
result int he different image file.


=[^LaTeX]=  =[^HTML]=
If you find that you are using |#---PASS| a lot, you may want to consider
a variant on |SET| that (like |PASS|) uses the module name for conditional
expansion. So, extending our previous example, if the image file is
different depending on what output type you choose, you can do the following:

	 #---SET-HTML aftimage=aft.gif
	 #---SET-LaTeX aftimage=aft.eps
	 *Image-center: %aftimage%

There is a subtle but very important difference between |SET| and |SET-xxx|:
the former is done during preprocessing and the latter is done post-processing.
The effect is, you can include AFT markup in |SET| and output specific markup
in |SET-xxx|.

#---SET-CONTROL expandinverbatim=yes

* End Credits

Thanks go out to Ward Cunningham, whose Wiki-Wiki Site editor inspired the
initial work on AFT.  Also, thanks to everyone who has used AFT over the
years and have offered invaluable feedback.