start_qc

#!/bin/sh

WIFI_HAS=$(cat  /sys/bus/sdio/devices/mmc1\:0001\:1/vendor)
if [[ "$WIFI_HAS" == "0x0097" ]]; then
	CONFIG=./tn-qc/st7b2.conf
else
	CONFIG=./tn-qc/st7b2_nw.conf
fi
rm ./tn-qc/st7b2_tmp.conf
cp "$CONFIG" ./tn-qc/st7b2_tmp.conf

cd tn-qc
echo "" > all_pass 
echo "Failed" > results/Bluetooth/result.txt
echo "Failed" > results/CAN_bus/result.txt
echo "Failed" > results/CPU/result.txt
echo "Failed" > results/Ethernet/result.txt
echo "Failed" > results/GPIO/result.txt
echo "Failed" > results/I2C1/result.txt
echo "Failed" > results/LED/result.txt
echo "Failed" > results/Memory/result.txt
echo "Failed" > results/mPCIE/result.txt
echo "Failed" > results/Nand_flash/result.txt
echo "Failed" > results/RTC/result.txt
echo "Failed" > results/SD/result.txt
echo "Failed" > results/SIM_card/result.txt
echo "Failed" > results/Switch_LAN/result.txt
echo "Failed" > results/UART/result.txt
echo "Failed" > results/USB/result.txt
echo "Failed" > results/Wifi/result.txt
echo "Failed" > results/EEPROM/result.txt
echo "Failed" > results/TEMP/result.txt
rm results/MACs/*
./run_qc.sh &
./functions/getmac.sh &
cd -

while true; do
	cat $CONFIG | while read line; do
		cat tn-qc/results/$line/result.txt >> tn-qc/result_temp
	done
	cp tn-qc/result_temp tn-qc/result_final
	rm tn-qc/result_temp
	all_pass=$(cat ./tn-qc/result_final | grep "Failed")

	if [[ "$all_pass" == "" ]]; then                                 
        	echo "all_pass" > ./tn-qc/all_pass
	else                                                                   
        	echo "" > ./tn-qc/all_pass
	fi                                

	sleep 1
done