0.99.1:

Fix: Attempt to user non-yet-supported register( such as " 0 y ) no longer throw exception.
- This is regression introduced in v0.98.0. #844.
Fix: Quickly switching active tab and back no longer re-start remaining flash animation #846.
- In previous version of vmp, You can see remaining flash re-triggered by(just an example)
  1. y i p see yanked paragraph is flashed.
  2. cmd-shfit-]( pane:show-next-item ), cmd-shfit-]( pane:show-previous-item ) quickly.
  3. When you come back to original editor, once fadeout-ed flash is re-started. But no longer from this version.

0.99.0:

Fix: Incorrect mouse selection when editor was soft-wrapped.
Improve: Make conditional keymaps config's title and description more user friendly.
New: Conditional keymap config keymapYToYankToLastCharacterOfLine(default false).
- By default Y behaves as y y.
- This is not consistent with C and D which behaves c $ and d $.
- By enabling this Y behaves as y $.
New: Screen line based column motion commands g 0, g ^ and g $. Commands:
- move-to-beginning-of-screen-line( keymap g 0 )
- move-to-first-character-of-screen-line( keymap g ^ )
- move-to-last-character-of-screen-line( keymap g $ ) Config: allowMoveToOffScreenColumnOnScreenLineMotion( vim-mode-plus original, intentionally differentiate default behavior from pure-Vim ).
- Affects how g 0, g ^ and g $ find destination position.
- When a line is wider than the screen width(no-wrapped line a)
  - true(default): move to off-screen column.
  - false: move to on-screen(visible) column( = Vim default ).
- Behavioral difference appears only when
  - Line is not wrapped.
  - Destination column is off-screen(invisible because of the line is wider than screen width).
    - for g 0: column-0 is off-screen
      - true: move to column-0.
      - false: move to first-visible-column.
    - for g ^: first-char-column is off-screen
      - true: move to first-char-column.
      - false: move to first-visible-char-column.
    - for g $: last-char-column is off-screen
      - true: move to last-char-column.
      - false: move to last-visible-char-column.

0.98.0:

Improve: Now r, f, F, t, T and surround use mini-editor to read user-input. #838
- Benefit?
  - Old: User cannot input non ascii char. It used keybinding to read user-input.
  - New: User can input non ascii char and also can paste from clipboard( cmd-v ).
- Limitation
  - When user set keymap like f a, original f command no longer work properly( You cannot use f b, f c, etc... ).
  - This is Atom's keymap system's limitation which cannot follow activeElement change when replaying keystroke on partial-match.
- Still m, `, ' read char through keybinding intentionally.
- These command use ascii char only.
- To allow user to set m prefix keymap like m X without breaking whole m feature.

0.97.2:

Fix: Clicking find-and-replace's project-find result view throw exception when projectSearchResultsPaneSplitDirection set to none(default). #830.
- Because, it opens matched entry on same pane and fire mouseup only(without preceeding mousedown event) on newly opened editor.
- Now vmp guard wired mouse-event by explicitly manage next expecting mouse-event.

0.97.1:

Fix: When startInInsertMode was true clicking editor in insert-mode throw exception but no longer. #830.

0.97.0:

Maintenance: Rewrite big amount of part from CoffeScript to JavaScript.
- Spec files are not re-written yet(and no plan at this point).
- Now files under lib/ directory are 29(JavaScript) vs 9(CoffeScript).
- Rewritten is done in following processare
  - 1. Translate by decaffeinate command provided by decaffeinate project(thanks!).
  - 1. Manual cleanup.
- Sorry If I create some regression.
Improve: Hide mode-string in status-bar while non-editor-item become active item(e.g. settings-view).
Breaking: Rename and change behavior of vim-mode-plus:clear-persistent-selection to vim-mode-plus:clear-persistent-selections.
- How?
  - Old: clear persistent selections for all editors in workspace.
  - New: clear persistent selections for current active editor.
- Why I changed
  - Old behavior is inconsistent with other similar command.
  - I couldn't imagine practical scenario where old behavior shines.
Improve: maximize-pane #828, #829
- New: Config option centerPaneOnMaximizePane ( default true ). by @dcalhoun
  - Old behavior: Text in editor is always centered.
  - New behavior: Text in editor is centered if centerPaneOnMaximizePane is true.
- New: Command vim-mode-plus:maximize-pane-without-center(default keymap: ctrl-w Z).
- Confusing?
  - If you never need centering effect, set centerPaneOnMaximizePane to false and use vim-mode-plus:maximize-pane command.
  - If you sometime want to centering, but sometime don't want centering
    - Leave centerPaneOnMaximizePane to true( default )
    - Use maximize-pane(cmd-enter or ctrl-w z) and maximize-pane-without-center(ctrl-w Z) command respectively."
Internal, Dev, Breaking: Remove introspection report generating command, which was important in early phase of vmp, but no longer.
Dev: write-command-table no longer throw exception on first use after restart.
Tweak: Change normal operator flash duration from 0.3s to 0.5s.
Improve: Mouse #826
- Fix: click in visual.blockwise mode no longer move cursor to first line of editor.
- Now mouse action appropriately modify selection and enter visual-mode if necessary.
  - shift-click
  - click(mousedown -> mouseup)
  - drag(mousedown -> mousemove -> mouseup).
  - double click: Atom select clicked word, vmp update visual-mode.
  - triple click: Atom select clicked row, vmp update visual-mode.

0.96.2:

Improve: #819 TextObject function for language-rust now also works on Windows platform.
Fix: g q q now work again. g w w also work now.

0.96.1:

Fix: g q q now work again. g w w also work now.

0.96.0:

New, Breaking: Operator reflow-with-stay. #818
- reflow-with-stay is g q equivalent feature. but unlike g q, g w keep cursor at same position.
- It auto-format each lines to fit with editor.preferredLineLength.
- Breaking: Existing command for g q was auto-flow, but renamed to reflow at this timing.
- If you enabled, stayOnTransformString config, g q and g w behave exactly same way.
Improve: #819 TextObject function now work for both language-rust and atom-language-rust.

0.95.0:

New: Pane manipulation commands ctrl-w H, ctrl-w J, ctrl-w K, ctrl-w L.
- These feature are merged from my paner package.
- Following keymaps are provided in atom-workspace scope.
  - ctrl-w ctrl-x or ctrl-w x: vim-mode-plus:exchange-pane
  - ctrl-w K: vim-mode-plus:move-pane-to-very-top
  - ctrl-w J: vim-mode-plus:move-pane-to-very-bottom
  - ctrl-w H: vim-mode-plus:move-pane-to-very-left
  - ctrl-w L: vim-mode-plus:move-pane-to-very-right
Fix: No longer throw exception when accessing unsupported register via insert-mode's ctrl-r(insert-mode) #812.
Support: set minimum engines to 1.18.0.

0.94.0:

Improve: Improve Fold handling in several operations. #809.
- y y, d d now yank/delete whole fold.
- o now start insertion from next line of end-of-fold(OLD-ver was next line of start-of-fold).
- V on folded row select whole fold, so V d delete multiple lines which was folded.
  - No longer show cursor at incorrect row when V on folded row(long lived cosmetic issue now FIXED).
- p on folded row paste next line of end-of-fold(OLD-ver was next line of start-of-fold).
New: Add several Fold manipulation commands. #807
- Commands:
  - z c: fold-current-row
  - z C: fold-current-row-recursively
  - z o: unfold-current-row
  - z O: unfold-current-row-recursively
  - z a: toggle-fold
  - z A: toggle-fold-recursively
- Previously z c, z o was mapped to following Atom's native fold commands. But now replaced with vmp's one.
- Why? for consistency, and vmp's one is multi-cursor aware, linewise selection aware(not manipulate next line of selected row).
  - z c: editor:fold-current-row
  - z o: editor:unfold-current-row
Improve, Experimental: Hide, left/right dock when maximized-pane.
Improve: Disable maximized-pane keymap(cmd-enter) in tree-view scope.
Keymap, Breaking: Remove default ctrl-v keymap in search-mini-editor to avoid conflicts. #791
- Previous version have following keymap(was experimental, you can recover this by set manually).
  - scope: atom-text-editor.vim-mode-plus-search
  - keystroke: ctrl-v to vim-mode-plus:search-activate-literal-mode
Fix: Protect from p throw exception in some uncertain situation p #802.
Fix: [Atom-v1.19-beta] Smooth scroll now work again.
- This issue is introduced by the big change in editor-rendering rewrite in v1.19.
Fix: [Atom-v1.19-beta], ctrl-y on first line of editor incorrectly mutate that row(do nothing is correct behavior) #808
Fix: [Atom-v1.19-beta] ctrl-y, ctrl-e now correctly use 2 lines offset.
Keymap: Make numpad0-9 behave same way as normal 0-9 key #806
Improve?, Breaking: Remove angle-bracket(<,>) matching for % motion. refs #700
- Still work in progress to improve behavior.
Spec: Fix spec failure in v1.19.0-beta.

0.93.0:

New: count support for g t to activate Nth pane item(= tab).
- 3 g t activate 3rd pane item.
- 7 g t activate 7th pane item.
- g t just activate next pane items as previous version.
- When specified pane items was not exist, do nothing.
- Limitation: vim-mode-plus's command only works on normal text-editor.
  - You can not do g t on non editor pane Item such as setting-view.
Fix: #766 executing maximize-pane on single-pane workspace make screen blank.
- This was happening only when pane have not yet split once after atom launch.
Fix: #777 J at last buffer row no longer clear text.
Doc: mention ex-mode link on README.md since it's now support vim-mode-plus.

0.92.1:

Improve: #782 Skip creating marker/decoration for empty range in hlsearch and incsearch.
- E.g.
  - When user searched () literally, it matches empty-range between each char.
  - In previous release, invisible hlsearch/incsearch marker/decoration was created.
  - By skipping this empty range highlight, improve responsiveness when user repeat n or N for that search.

0.92.0:

Fix: blockwise-selection was not cleared correctly in some situation(but I noticed via code review)
Fix: #780 No longer throw exception when close editor in the middle of smooth scrolling.
New: #770, #774 Add fold manipulation commands based on PR by @weihanglo.
- Commands: Put non-NEW commands here for thoroughness.
  - z a: toggle-fold, toggle( fold or unfold ) cursor's fold.( NEW )
  - z r: unfold-next-indent-level, unfold deepest folded fold. support count.( NEW )
  - z m: fold-next-indent-level, fold deepest unfolded fold. support count.( NEW )
  - z M: fold-all, unfold all fold.( not NEW )
  - z R: unfold-all, fold all fold.( not NEW )
- Setting: maxFoldableIndentLevel( default 20 )
  - Folds which startRow exceeds this level are not folded on zm and zM
  - e.g.
    - If you have 3 folds in editor, each fold starts following indentLevel.
      - fold-a: 0
      - fold-b: 1
      - fold-c: 2
    - maxFoldableIndentLevel = 20:
      - z M fold all
      - z m fold fold-c, fold-b, fold-a on each time.
    - maxFoldableIndentLevel = 1:
      - z M fold fold-a
      - z m fold fold-b, fold-a on each time.
    - maxFoldableIndentLevel = 0:
      - z M fold fold-a only.
      - z m fold fold-a.
- Implementation is NOT exactly same as pure-Vim.
  - Pure-vim: explicitly manage foldlevel value and zm, zr is done based on foldlevel kept.
  - vmp: Does not manage foldlevel explicitly, instead it detect fold state from editor.
    - This approach gives better compatibility for Atom's native fold commands like cmd-k cmd-1
Improve: Don't auto-load vimState.highlightSearch when nothing to highlight.
Internal: #768 Support upcoming new decoration type: 'cursor' for cursor visibility in visual-mode.
Internal: #763 add spec for ensure minimum required file on vmp startup.

0.91.0:

Improve, Performance: Reduce amount of IO( number of files to read ) on startup further. #760
- Avoid require on initial package activation. Especially following widely-used libs is not longer required on startup.
  - lib/selection-wrapper.coffee
  - lib/utils.coffee
  - underscore-plus
- Now swrap and utils are accessible via lazy-prop( vimState.utils and vimState.swrap ).
Developer: When debug setting was set to true, log lazy-require info when atom inDevMode.

0.90.2:

Fix: For search on initial active-editor after startup, highlightSearch did not happened.
- This is regression introduced as part of lazy instantiation of HighlightSearchManager.

0.90.1:

Fix: Sorry, removed leftover console.log in atom running in dev mode.

0.90.0:

Improve: Reduce activation time of vim-mode-plus to reduce your frustration on Atom startup. #758
- About 2x faster activation time( Full detail is on #758 ).
- With Two technique
  - Define all vmp-command from pre-populated command-table and lazy-require necessary command file on execution.
  - Defer instantiation of xxxManager referred by vimState.
    - E.g. vimState.highlightSearch is instance of HighlightSearchManager and it's now set on-demand.
- [For vmp developer only] If command signature was changed, need update command-table.
  - Command signature it's name and scope(e.g. vim-mode-plus:move-down and atom-text-editor )
  - [Caution] write-command-table-on-disk command is available only when atom running in dev-mode.
  - [Caution] Directly update lib/command-table.coffee if populated-table was changed from loaded one.
New, Breaking: Default keymap update #753
- macOS user only
  - ctrl-s mapped to transform-string-by-select-list in normal-mode and visual-mode
- All user
  - z in operator-pending is short hand of a z(a-fold).
    - You can do y z instead of y a z. E.g. When you yank foldable whole if block.
    - You can do c z instead of c a z. E.g. When you change foldable whole if block.
  - g r mapped to reverse
  - g s mapped to sort
  - g c mapped to select-latest-change which correspond to g v ( select-previous-selection )
  - g C mapped to camel-case
- What was broken? Before: g c was for camel-case, g C was for pascal-case. Now: g c is for select-latest-change, g C is for camel-case. No default pascal-case.
New: Target alias for surround #751, #755
- Now b, B, r, a char is aliased to corresponding target.
  - b is alias for ( or )
  - B is alias for { or }
  - r is alias for [ or ]
  - a is alias for < or >( I don't like this, just followed how surround.vim is doing ).
- These alias can be used in surround, delete-surround, change-surround.
  - When have these keymap: surround( y s ), delete-surround( d s ), change-surround(c s)
    - y s i w b is equals to y s i w (.
    - y s i w B is equals to y s i w {
    - y s i w r is equals to y s i w [
    - y s i w a is equals to y s i w <
New: InnerPair pre-targeted rotate command
- Commands:
  - rotate-arguments-of-inner-pair
  - rotate-arguments-backwards-of-inner-pair
- No keymap by default.
- E.g.
  - When you map g > to rotate-arguments-of-inner-pair and g < to backwards
  - You can rotate arg of parenthesis by g > and . if necessary, g < for backwards.
Internal: Cleanup developer.coffee and remove unused dev commands.

0.89.0:

New: Text-object for arguments
- Keymap:
  - i ,: inner-arguments
  - a ,: a-arguments
  - ,: inner-arguments( shorthand keymap available only in operator-pending-mode )
- Example:
  - c i ,( you can do c ,)
  - d i ,( you can do d ,)
  - d a ,
  - v a ,
- From where this text-object find arguments?
  - Auto-detect inner range of (), [], {} pairs and parse argument and select.
  - When it failed to find inner-pair range, it fallbacks to current-line range.
- How to determine separator of arguments?
  - Heuristically determine separator from comma , or white-space.
    - When some separator contains comma, it treat comma as separator.
    - When no separator contains comma, it treat white-space as separator.
New, Setting: #747 Conditional keymap setting keymapPToPutWithAutoIndent.
- When enabled, p, and P paste with-auto-indent for linewise paste.
- Why I added this helper setting?
  - You can set keymap by yourself in your keymap.cson
    - But you need to be careful to not overwrite p in operator-pending-mode.
  - In normal-mode, p is mapped to put.
  - In operator-pending-mode, p is mapped to inner-paragraph, as shorthand of i p.
  - When set p keymap in your keymap.cson without breaking predefined shorthand p.
  - You need to exclude operator-pending-mode scope like this.
```
'atom-text-editor.vim-mode-plus:not(.insert-mode):not(.operator-pending-mode)':
  'p': 'vim-mode-plus:put-after-with-auto-indent'
```
  - But I don't think I can expect normal user to do so. So
New: rotate, rotate-backwards operator
- No keymap by default.
- ChangeOrder family operator, which rotate line in linewise, argument in charactewise.
New: #748 ChangeOrder family( child ) operator now work differently for charactewise-target.
- Affects: reverse, rotate, rotate-backwards, sort, sort-case-insensitively, sort-by-number
- [Same]: When linewise target, it change order of line.
- [New]: When characterwise target, it auto-detect arguments and change order of arguments within characterwise-range.
New: Operator split-arguments and split-arguments-with-remove-separator
- Commands:
  - split-arguments: split arguments into multiple-lines within specified target without removing separator.
  - split-arguments-with-remove-separator: behave same as split-arguments but it remove separator(sugh as , ).
- Keymap g , to split-arguments by default( aggressive decision ).
  - Pure-Vim's g , is "move to newer cursor position of change list", but vmp have no changelist anyway.
New: [Experimental] Added inner-pair pre-targeted version of split-arguments and reverse to evaluate it's usefulness.
- No keymap
- Commands:
  - split-arguments-of-inner-any-pair
  - reverse-inner-any-pair
Breaking: Remove showCursorInVisualMode setting
- Notify and ask confirmation for auto-remove from config.cson if it set to non-default value.
Improve: r enter to replace with new-line now correctly auto-indent inserted new-line.
Improve: When surround linewse-target, now auto-indent surrounded lines more accurately than previous release.

0.88.0:

Doc: New wiki page
- DifferencesFromPureVim
- VmpUniqueKeymaps
Keymaps: Normal keymap addition
- New: Now subword text-object have default keymap, you can change subword by c i d.
  - i d: inner-subword
  - a d: a-subword
- cmd-a is mapped to inner-entire in operator-pending and visual-mode for macOS user.
  - So macOS user can use cmd-a as shorthand of i e(inner-entire).
  - E.g. Change all occurrence in text by c o cmd-a instead of c o i e
Keymaps: Shorthand keymaps in operator-pending mode
- Prerequisite
  - In operator-pending-mode, next command must be text-object or motion
  - So all operator command in operator-pending-mode is INVALID.
  - This mean, we can safely use operator command's keymap in operator-pending-mode as shorthand keymap of text-object or motion.
  - But using these keymap for motion is meaningless since motion is single-key, but text-object key is two keystroke(e.g. i w).
  - So I pre-defined short-hand keymap for text-object which was work for me.
- What was defined?
  - c as shorthand of inner-smart-word, but c c is not affected.
    - You can yank word by y c instead of y i w. ( change by c c if you enabled it in setting )
    - To make c c works for change inner-smart-word, set keymapCCToChangeInnerSmartWord to true( false by default )
    - smart-word is similar to word but it's include - char.
  - C as shorthand of inner-whole-word
    - You can yank whole-word by y C instead of y i W. ( change by c C )
  - d as shorthand of inner-subword, but d d is not affected.
    - You can yank subword by y d instead of y i d. ( change by c d )
  - p as shorthand of inner-paragraph
    - You can yank paragraph by y p instead of y i p. ( change by c p )
Keymaps: Conditional keymap enabled by setting.
- Prerequisite
  - Added several configuration option which is 1-to-1 mapped to keymap.
  - When set to true, corresponding keymap is defined.
  - This is just as helper to define complex keymap via checkbox.
  - For me, I enabled all of these setting and I want strongly recommend you to evaluate these setting at least once.
  - These keymaps are picked from my local keymap which was realy work well for a log time.
- Here is new setting, all false by default. Effect(good and bad) of these keymap is explained in vmp's setting-view.
  - keymapUnderscoreToReplaceWithRegister
  - keymapCCToChangeInnerSmartWord
  - keymapSemicolonToInnerAnyPairInOperatorPendingMode
  - keymapSemicolonToInnerAnyPairInVisualMode
  - keymapBackslashToInnerCommentOrParagraphWhenToggleLineCommentsIsPending
Breaking: Default setting change:
- clearPersistentSelectionOnResetNormalMode: true( false in previous version )
- clearHighlightSearchOnResetNormalMode: true( false in previous version )
- highlightSearch: true( false in previous version )
- useClipboardAsDefaultRegister: true( false in previous version )
New: #743, #739 New config option dontUpdateRegisterOnChangeOrSubstitute( default false ).
- When set to true, all c, s, C, S operation no longer update register content.
- If you want keep register content unchanged by c i w, set this to false.
New: TextObject comment-or-paragraph for use of easy comment-in/out when g / is pending.
Fix: For commands set-register-name-to-* or set-register-name-to-_, now show hover and correctly set with-register CSS scope on editorElement.
Fix, Improve: #744 Make vmp work well with other atom-pkg or atom's native feature.
- Update selection prop on command dispatch of outer-vmp command
  - Now correctly update cursor visibility and start visual-mode after cmd-e then cmd-g.
- Update selection prop if editor retake focus.
  - Now correctly start visual-mode after cmd-f result was confirmed by enter.
Improve: Better integration with demo-mode package
- Postpone destroying operator-flash while demo-mode's hover indicator is displayed.
Improve: When undo/redoing occurrence operation, flash was suppressed when all occurrence start and end with same column, but now flashed.
Improve: Improve containment check for togggle-preset-occurrence
- When cursor is at right column of non-word char(e.g. closing parenthesis )), not longer misunderstand that cursor is on occurrence-marker.
Internal: #742 Rewrite RegisterManager, reduced complex logic which make me really confuse.

0.87.0:

New: #732 Add integration with demo-mode package.
- demo-mode is new Atom package I've released recently, it was originally developed as part of vim-mode-plus.
- When demo-mode is activated via demo-mode:toggle, vmp do special integration to
  - Make operator flash duration longer than normal duration
  - Demo-mode hover indicator show keystorke, command and kind(extra info added by vmp) on each keybinding dispatch.
    - kind is one of operator, text-object, motion, misc-command
New: #722 New version of put command which paste content to suggested indent level with keeping pasting text layout.
- PR by @apazzolini
- Normal p, P paste content as-is, so ignores desirable( or suggested ) indent level.
- Following two command respect suggested indent level on linewise paste( no diff for characterwise paste ).
  - vim-mode-plus:put-before-with-auto-indent: Same as put-before(P) with respect suggested indent level.
  - vim-mode-plus:put-after-with-auto-indent: Same as put-after(p) with respect suggested indent level.
- No keymaps provided by default
Improve: o, O to adjust IndentLevel when o, O is executed from empty row #723
- PR by @apazzolini
- To provider further pure-Vim compatible behavior.

0.86.3

Improve: #727 Tweak incremental-search match highlight style to not hide covering text in some syntax-theme.

0.86.2

Fix: #725 Now v( or V or ctrl-v) then escape g v correctly re-select previously selected range.
Improve: #726 Relax selection-property assertion.
- Fix: #716 No longer throw error when confirming color via color-picker then escape.

0.86.0, 0.86.1(just changelog-typo-fix):

New: insert-at-start-of-subword-occurrence and insert-at-end-of-subword-occurrence command.
- Start insert at start or end of subword occurrence.
- E.g
  - When I map {, and } to these command in normal-mode.
    - { f: start insert at each start of subword-occurrence within function.
    - } f: start insert at each end of subword-occurrence within function.
    - { p: start insert at each start of subword-occurrence within paragraph.
Internal, Breaking: Remove did-restore-cursor-positions hook which was used in Operator code but no longer used.
Internal, Breaking: Remove many of simple accessor method like getName, getOperator, now just use @name, @operator to access these values.
Improve: Hide cursor on early select
- For supportEarlySelect = true operator( surround, replace ).
- These operator began to shows cursor on early-select from Atom v1.15, but now hide again for early-select timing.
Internal, Dev: #719 No longer use HTMLElement as search-input for speedy dev by hot-reload vmp.
Internal, Breaking: Move InsertMode(was in insert-mode.coffee) operations under MiscCommands( in misc-commands.coffee)
Improve: Keep original multi-cursor on occurrence operation by migrating mutation info.
Improve: Simplify mark manager and destroy all marker on vimState.onDidDestroy.
Improve: Clean up mutationManager.
Fix, Internal: Now do TYPE check for spec-helper's ensure function's argument, some test was silently skipped in previous release.

0.85.1:

Fix, SUPER Critical: #175 Moving cursor in visual-mode make Atom editor really slow.
- vmp's mark is stored as marker and was created limitlessly without destroying previous-marker.
- As number of marker increased, editor get really slow.
- This is old Bug from original vim-mode, but impact get really significant from v0.58.0.
  - Since from v0.58.0, to track previousSelection(used for g v) < and > mark is updated on every visual-mode movement.

0.85.0:

Fix: When stayOnYank was enabled, y 0, y h no longer move cursor.
Fix: [Cosmetic but important] Fix very small cursor position jump( cosmetic ) when activating vL ( because of gap between px and em? )
Fix: Respect v operator-modifier for t( Till ) motion.
- e.g. In text "ab" when cursor is at "a"
  - Old: d t b delete "a"( Good ), d v t b delete "a"( Bad ).
  - New: d t b delete "a"( Good ), d v t b don't delete "a"( Good ).
Improve: Now can select line ending new line char in visual-mode.
- E.g. Move right by l at end of line select new-line.
Fix: #699 Lost goalColumn in visual.blockwise when move across blank-row.
- This is regression in v0.84.0.
Fix: #119 When j, k is used as operator's target, don't apply operation when failed to move.
- Now more compatible with pure Vim.
- Example:
  - d j from last line do nothing. ( In previous version, delete last line ).
  - d k from first line do nothing. ( In previous version, delete first line ).
Improve: g v after vL( visual-linewise ) to restore characterwise column.
Fix: v i p d then . repeat from different cursor position now works correctly
Internal:
- Overhaul: CursorStyleManager, SelectionWrapper, TextObject, BlockwiseSelection
- Rename characterwiseHead to propertyHead in spec-helper.coffee
- Remove lots of unnecessary null guard.
Breaking: Remove All text-obect, it's alias of Entire but not used.
Breaking: Remove Edge text-object, it's experimentally added in the past, but not maintained and not as useful as I originally thought.
Improve: TextObject
- Improve: No longer iterate selectTextObject over each memberSelection of blockwise selection( blockwiseSelection consists of multiple selection ).
- Improve: Fold , Function text-object now always expand if possible by checking containment against selected buffer range
- Improve: Pair text-object now always find from cursor position.
- Improve: Executing text-object from vL mode now works as expected in most of text-object.
- Internal: Set wise explicitly in most of text-obect rather than dynamically determine from selection range.
- Internal: Auto generate Inner, or A prefixed classes and AllowForwarding suffixed classes( reduced lots of boilerplate code ).
Improve: visual-blockwise ( vB-mode )
- #699 Fix: Now respect goalColumn in vB when move across blank row by j or k.
  - Regression introduced in v0.84.0.
- #704 Rewrite vB-mode related code.
  - vB selection is normalized before selecting text-object.
  - So no longer iterate selectTextObject over each memberSelection of blockwise selection.
- Improve: #438 when vB selection respect goalColumn
  - Original goalColumn is respected as long as selection-head is right-most column.

0.84.1:

Fix: To fix vim-mode-plus-move-selected-text degradation.

0.84.0:

Fix, Improve: #689 Occurrence was not worked for the word which include non-word char such as $ and @.
- E.g. $var in Perl, PHP.
- This was because when finding occurrences, it searched by \bword\b pattern.
- But \b\$var\b never match $var, in this case find by \$var\b pattern from this release( auto relax \b boundary ).
Improve: Preserve fold on g v
Internal:
- Cleanup selection-wrapper code.
- Remove unused functions from utils.coffee

0.83.0:

Support: set minimum engines to ^1.14.0
Fix: When o was executed in vL mode, didn't correctly restore column on shift to vC or normal.
- Now correctly restore characterwise column after o in linewise mode.
Improve: g . correctly restore subword-occurrence-marker
- g .( vim-mode-plus:add-preset-occurrence-from-last-occurrence-pattern ) is command to restore last cleared preset-occurrence.
- It is useful when you mistakenly cleared it by escape and quickly recover last preset-occurrence marker.
- Previously preset-subword-occurrence was not correctly restored by g ., but now fixed.
Improve: Use faster displayMarkerLayer::clear() for hlsearch, occurrence-manager, search-model etc.
Internal: add dev prefix for setting for dev-use.
Internal: Remove lots of unused function in utils.coffee.
Internal: add vimState::getConfig to access package settings.

0.82.3:

Fix: move-to-previous-subword stops boundary of white-space unnecessarily( upstream issue auto-fixed)
- Spec to accommodating wrong behavior removed.
Fix: B moves to beginning of file when invoked from begging of line.
- Introduced by upstream change in Atom v1.14.0( or v1.14.1?).

0.82.2:

Fix: No longer throw exception when showHoverSearchCounter is enabled and editor was closed immediately after hover counter was shown.

0.82.1:

Fix: p, P in vB-mode no longer throw exception #672
- This bug was introduced in v0.80.0.

0.82.0:

New: command move-up-wrap, move-down-wrap, j, k with line wrap( top-to-bottom/bottom-to-top ).
- No keymap by default. intended to use from atom-narrow package(now I'm actively developping).

0.81.0:

Improve, Breaking: Remove fallbackTabAndShiftTabInNormalMode
- This was necessary since tab, shift-tab was mapped to move-to-next-occurrence and move-to-previous-occurrence.
- When true, fallback tab, shift-tab to editor:indent or editor:outdent-selected-rows when no occurrence-marker exist.
- But now, these mapping is defined in has-occurrence scope, which means occurrence-marker exists on editor.
- So your tab, shift-tab is no longer conflict if no occurrence-marker exits.

0.80.0:

Breaking: Disable I, A special keymap in has-occurrence scope.
- To avoid surprising user. Now behave as normal I amnd A.
- To insert start/end of each occurrences, use visual-mode select then I or A.
- Or set keymap in your keymap.cson to restore previous verison's keymap.
```
'atom-text-editor.vim-mode-plus.has-occurrence:not(.insert-mode)':
  'I': 'vim-mode-plus:insert-at-start-of-target'
  'A': 'vim-mode-plus:insert-at-end-of-target'
```
Fix: No longer throw exception when specified register has no value(=text) on p, P operation. #656.
Fix: Now selection properties cleared on each normal-mode operation finish to avoid hover counter is shown at incorrect position.
Developer: Spec helper ensureMode no longer mutate passed array itself.
Developer: reload-packages command now reload depending packages in correct order.

0.79.1:

Fix: #653 Immediately close search-mini-editor when main editorElement was clicked to avoid stale decorations remains on editor.
Fix: Move to next subword no longer throw error in some ending string pattern.
Improve: move-to-next-word and it's child motion now skip white-space only row(compatible with pure-Vim).

0.79.0:

Fix: #647 Ensure clearing blockwise selection after . repeating blockwise operation.
Fix: #537 When persistent-selection is exists, I in visual-blockwise, make selected range get wired.
Fix: In atom 1.14-beta, when IncrementalSearch was enabled, / throw exception #652
Improve: #646 Improve TagFinder to find enclosed range first
Internal: Extract normalization/denormalization of linewise, characterwise selection to selection-wrapper
Internal: Improve spec helper
- Introduce cursorScreen for spec-helper for explicitness
- Now cursor: is bufferPosition-wise
- #650 textC no longer ensure order of cursors appear

0.78.0: Happy New Year 2017!

New: TransformString Operator sort-case-insensitively by @thancock20 #640
Fix: v * then n or N in different editor no longer throw error #641.
Improve: Pair text-object
- Internal: Use new PairFinder class to find pair range(extracted from text-object.coffee).
- Improve: Bracket TextObject: (, ), {, }, [, ], <, >
  - Find range by considering syntax-scope. #644.
- Improve: Quote TextObject: ', " etc..
  - Simply find quote if cursor is NOT in quote char #173, #638
  - If cursor is ON quote char consider inside/outside of double-quote #556, #642
Improve: Fold text-object(i z, a z) no longer ignore fold on cursor's row. #636
Internal: New Base::scanForward, Base::scanBackward and use it
Internal: Lots of internal code cleanup(utils.coffee, text-object.coffee etc.)

0.77.0

New: Subword support #634
- Motion: move-to-next-subword, move-to-previous-subword, move-to-end-of-subword'
- TextObject: a-subword, inner-subword(no keymaps by default)
- OperatorModifier: O works as like o, except O works for subword.(e.g. c O p)
- g O(toggle-preset-subword-occurrence) mark subword, subword-version of g o.
New: TransformString family operator split-string-with-keeping-splitter, sort-by-number( no keymap )
New g q(auto-flow) operator, g q q or g q g q works for current line #187
- Implementation-wise, it just dispatch to core autoflow package. So might not be compatible with pure-Vim.
Improve: maximize-pane #633
- Tweak: Now set left-margin(20%) when maximized, so that code comes front of your eye.
- Now hide statusbar.
- New: option hideStatusBarOnMaximizePane(default true).
Tweak: Support #627 earlySelect for operator replace
Improve: Early settle insertion count for insertion operator(i a) to avoid taking count for motion.
Fix: Now v enter then . repeated correctly create 1 column persistent #630
Fix: ctrl-v enter . no longer throw error #630
Spec: Improve coverage for TransformString children(join etc..)
Internal: Rewrite ctrl-a, ctrl-x, g ctrl-a, g ctrl-x
- Breaking: No longer beep when failed.

0.76.0

Breaking, Cosmetic: Remove showHoverOnOperate feature #626
- Reason:
  - This is fancy feature added at very early phase of vim-mode-plus as experiment.
  - But this feature getting in a way to improve, cleanup vim-mode-plus.
- Removed Configuration: Following parameters are removed, remove it manually from config.cson if necessary.
  - showHoverOnOperate
  - showHoverOnOperateIcon
New: [Experimental] surround now select target immediately then get user input.
- Better UI feedback, to reduce what-I-have-to-do-next, where-am-I situation in complex keystroke operation.
- When change-surround fail at first character, it immediately stop execution( No need to input useless next char ).
Fix: maximize-pane now work for many many split pane #623.
Improve: Hover performance is greatly improved #625
- Hover shown in 1 0 j, " a y y, change-surround is now responsive than before.
- HoverElement is renamed to HoverManager(no longer HTMLELement).
Improve: undo/redo flashing humanization further.
Improve: Tweak search flashing to win over existing highlight-search.
Internal: Cleanup occurrence-spec, avoid using editor.element for mini-editor.

0.75.0

New: setCursorToStartOfChangeOnUndoRedoStrategy(default smart) #620, #621
New: remove-leading-white-spaces( no defautl keymap ): work always linewise.
New, Breaking: replace is now normal operator which enter operator-pending-mode, old replace command was renamed.
- OldName: vim-mode-plus:replace( mapped from r )
- NewName: vim-mode-plus:replace-character( mapped from r )
Fix: m command was inappropriately repeatable by .
Fix: No longer throw exception for V tab or V shift-tab #619
Improve: Respect operator specific stayOn option when stayOnOccurrence was true and fail to select occurrence-marker.
Improve: d o p moves cursor to end of mutation as normal d #611
Improve: undo/redo
- Cursor placement on undo/redo further.
  - o and O undo/redo is now behave same as pure-Vim.
- Flashing is further suppressed to be un-noisy. Also humanize new line(\n) change flash to feel naturally.
  - Skip flash for leading white spaces change
  - Skip flash when multiple range start and end with exactly same column(e.g. toggle-line-comments).
Improve: transform-smart-word-by-select-list now respect precomposed target of each string transformer.
- E.g. SplitString have precomposed target( = MoveToRelativeLine ), respect it over smart-word target.
Internal: Remove manual checkpoint and change grouping management from normal operator as like before(was not necessary).

0.74.0

Improve: More accurate cursor placement after undo/redo. #603
- IMPORTANT, new approach to restore cursor position after undo/redo.
  - Previous release: Did manual-cursor-position-adjustment after undo/redo
  - From this release: Create text-buffer's checkpoint at correct timing then restore on undo/redo.
  - Checkpoint mechanism was being used for long time for i, a, c, from this release used operator globally.
  - This shift is not completed, will continue gradual improvement.
Improve: Use different color on flashOnUndoRedo #610
- Single change: subtle color flash with duration 0.3s(singe delete-only change is no longer flashed).
- Multi change add: green flash with duration 0.8s
- Multi change delete: red flash with duration 0.8s
Improve: p, P #615
- Improve: Flash color differentiation on p, P(use longer flash to make it obvious mutation boundary).
- Breaking: Simplified linewise paste, when line have no ending newline, it add newline automatically
- Improve: Pasting characterwise register now place cursor at start of pasted text if text was not single-line-text.
Improve: Now Indent(>), Outdent(<) indent/outdent count times in visual-mode #614
Improve, Breaking: Improve insert-at-start/end-of-smart-word, now no longer stop at whitespace boundary. #613
- Breaking: Renamed command name(as same as previous release, no default-keymap)
  - insert-at-start-of-inner-smart-word -> insert-at-start-of-smart-word
  - insert-at-end-of-inner-smart-word -> insert-at-end-of-smart-word
FIX: Incorrectly used occurrence-flash if occurrence-marker exists but not selected by operation.
Breaking: Remove experimental put-after-and-select, put-before-and-select command #612
Internal: When fail to select occurrence did-select-occurrence event no longer fired(was fired in previous release).
Internal: Rename register type name from character to characterwise for consistency.

0.73.2:

Fix: C and D in vB(visual-block) mode was broken from v0.70.0. #602.
Fix: d o tab then . repeat no longer fail #598
Improve: Simplify flash for undo/redo, red color is used for remove-only-change #601

0.73.1:

Improve, New: fallback for tab, shift-tab in normal-mode.
- By default in normal-mode, tab and shift-tab is mapped to move-to-occurrence and move-to-previous-occurrence
- When no occurrence-marker was exists on editor, it fallbacks to Atom's default editor:indent, editor:outdent-selected-rows.
- For user don't want this fallback, set fallbackTabAndShiftTabInNormalMode to false(default true).

0.73.0:

New: Close empty search-mini-editor by backspace from @gittyupagain. #567
New, Breaking: Keep occurrence-marker after operation. #572
- Improve: Destroy occurrence-marker remains after invalidated.
- Breaking: Operate on normal-target when fail to select occurrence-marker. #578, #579
- Improve: Destroy occurrence-marker in-sync if possible #592
New: [experimental] Operator add-blank-line-below, add-blank-line-above, No defaut keymap. #574
New, Breaking: I, A keymap in operator-pending(d I for d ^, d A for d $).
New: Simplify tab, shift-tab, #581, #594
- Keymap, Breaking: Mapped in all mode except insert-mode, opinionated decision.
  - tab: move-to-next-occurrence
  - shift-tab: move-to-previous-occurrence
- New: Setting flashOnMoveToOccurrence, default false.
- Improve: Now correctly skips cleared or invalidated(=invisible) occurrence-marker. #594
- Improve: . repeat support for move-to-occurrence targeted operation #591
- Improve: Spec coverage.
Fix: text-objects function now work properly in language-elixir syntax by @dillonkearns. #585
Fix: To undo repeat-of-change need u twice in v0.72.0.
Fix: When has-occurrence, I, A was incorrectly keymapped in insert-mode.
Fix: Prevent Atom editor freezes by passing BIG count. #560, #596
- For Motion(9999999j), TextObject: v9999999ip and Insert: 9999999i
Improve: Flashing
- Use red flash color for delete operation #573
- Longer flash for undo/redo(by keyframe tweaking).
- Improve: Reduce chance to re-flash immediately split after undo by reducing duration(1sec to 500ms).
Improve: Documentation, description
- Improve config description
- Add FAQ for charactersToAddSpaceOnSurround
- Mention vim-mode-plus-keymaps-for-surround keymap only package in README.md.
Internal, Breaking: [experimental] No longer directly call Motion::select() from operator #595
Internal: Spec improved
- textC spec DSL which declare cursor position by | and !(last-cursor)
- Rewrite several specs by improving granularity by checking cursor position(was not checked before)
- Allow partialMatchTimeout options for ensure and keystroke spec helper

0.72.0:

New: Command add-preset-occurrence-from-last-occurrence-pattern default g . keymap.
New: Command insert-at-start-of-occurrence, insert-at-end-of-occurrence
New: Config parameter stayOnOccurrence to specify stayOn behavior on occurrence-operation. #569.
New: unused and unnecessary indirection
Improve: Efficiency improved for cursorStyleManager. Skip cursor style modification if it can,
Improve, Breaking: AngleBracket now can work with multi-line #552
- TextObject Tag is no longer member of AnyPair. Since its conflict with AngleBracket
Improve, Fix: No longer unwanted remaining flash by flashOnOperate since now it's invalidate when touched.
Improve: Flash color is more stand-out when occurrence-operation #566
Improve: For flashing undo/redo, no longer red/green color blended when whichever is contained other #562
Improve: Place cursor more accurately for undo/redo when occurrence is involved.
Improve: Respect last cursor position when multiple cursor is cleared by escape in normal-mode. #557, #562
Improve: When occurrence is involved in operation, respect original cursor position after operation finished. #557
Improve: highlight when highlightSearch changed like on, off, on
Fix: toggle-preset-occurrence should not accept persistentSelection but it was in previous release.
Fix: highlightSearch no longer extend highlight marker on appending text on tail #555
Internal: All vimState instances are managed by VimState class itself.
Internal: New convention. Ensure ActivateInsertMode and it's child call @selectTarget() before starting any mutation.

0.71.0:

New: moveToFirstCharacterOnVerticalMotion options #550, #549
- Default: true, if you disable, column position is kept after these motion.
- Similar to startofline option in pure-Vim.
- Affects following motion(Unlike pure-Vim, d, < <, > > is not affected)
  - G, g g, H, M, L, ctrl-f, ctrl-b, ctrl-d, ctrl-u
- For d, < <, > >, use stayOnXXX option if you want to keep column.
Improve: Don't close search mini-editor on blur event. (e.g. app-switch by cmd-tab) #539
Internal: Base::getCount() can take offset.
Internal Bug: Now properly detect duplicate class Name among operations.
Internal: Rename Misc.Scroll to ScrollWithoutChangingCursorPosition for explicitness.

0.70.0:

New: Option automaticallyEscapeInsertModeOnActivePaneItemChange #535
New: Option keepColumnOnSelectTextObject to keep original column in v i p etc. #541, #543
Fix: Cursor no longer become out-of-screen when move upward in vB #546
Fix: I and A should work on occurrence when has-occurrence #488, #518
Fix: select-occurrence in vL does not correctly select occurrence(spec missed to catch) in previous release.
Improve: flash-UI feedback when Y in vC mode.
Improve: Cleanup and suppress flash for r command
Improve: As general rule selection target can override pre-composed target #531
- e.g transform-smart-word-by-select-list works on selection if selection was not empty.
Improve: Persistent-selection treated as-if real-selection further #532, #534
Improve: Tweak what syntax scope is treated as function for TextObject.Function
Improve: delete-line is now available in all mode(visual mode only for default keymap)
Improve: Now pair text-object change mode to vC regardless of current mode. #542
- Remove internally used TextObject::allowSubmodeChange property
Breaking: Remove experimental but un-used operators and text-objects.
- Operator DeleteOccurrenceInAFunctionOrInnerParagraph, ChangeOccurrenceInAFunctionOrInnerParagraph, ChangeOccurrenceInAPersistentSelection
- TextObject UnionTextObject, AFunctionOrInnerParagraph, ACurrentSelectionAndAPersistentSelection, TextObjectFirstFound
Internal: Rename useMakerForStay to stayByMarker and no longer track marker unless needStay()
Internal: Cleanup mutationManger #530
Internal, Spec: New textC set/ensure option, validate exclusive option. #528, #533

0.69.0:

New: Command equalize-panes(ctrl-w =) by @mattaschmann
New, Breaking: g I support, breaking because old I mapped command was renamed(harmless for most users).
- Renamed because of naming-bug.
- Renamed old insert-at-beginning-of-line to insert-at-first-character-of-line(mapped to I).
- Then now insert-at-beginning-of-line is mapped to g I.
New: vim-niceblock compatible behavior #488
- Now visual-mode's I, A works differently depending on vC, vB, vL modes.
- See YouDontKnowVimModePlus page on vmp's wiki for detail.
New: [experimental] search-occurrence motion. #519
- When you can see dotted-underlined-occurrence-marker, tab, shift-tab can be used as motion.
- You can use space to deselect occurrence-marker while moving next/prev of occurrence-marker.
- [keymap]
  - tab: vim-mode-plus:search-occurrence
  - shift-tab: vim-mode-plus:search-occurrence-backwards
Fix: When yank into named register for input-taking-motion(e.g " a y f )), it fail to save to register. #520
Improve: now vimState.globalState is resettable for all or specific field
Dev: open-in-vim now open buffer with at same cursor position.
Fix: Improve: y i p now move to start of paragraph after operator finished. #507
Fix: Improve: Further compatible resulting cursor position after operator finished. #529
Fix: Hover used to show count and register was not correctly positioned, really was bad degradation. #406
Improve: No longer share inputUI across operation, as a result vimState.input become unavailable. #525.
New: C in vC mode change whole-line #527

0.68.0:

New: project-find-from-search command which have being provided as separate package #508.
- cmd-enter is default keymap for macOS user.
Fix: when flashScreenOnSearchHasNoMatch was false, throw error when search item was not found #510.

0.67.0:

Support: set minimum engines to ^1.13.0-beta1.
Fix: Remove use of ::shadow. #485
Fix: cmd-d didn't start visual-mode suffered by the side-effect of shadowDOM removal #490
Experimental, Improve: Better flashing effect using keyframe CSS animation
- Breaking: Removed flashing duration config params.
- Now flashingDuration is fixed to 1 sec at maximum(duration until marker be destroyed)
- User can tweak by css within this duration. Refer styles/vim-mode-plus.less if you want.
Fix: Scroll motion failed to put cursor at firstChar of screen line when it’s wrapped.
Breaking: Remove cursor line flashing effect on smoothScrolling. #502
UI: Modify style of search match to modern(??) style.
Fix: No longer remove non-vmp-css-class from editorElement temporarily while waiting-user-input #497.

0.66.1:

Fix: Flash only one instance at a given moment when search /, ?, #, ?. #494
Fix: % motion now work again #493 by @mattaschmann
Fix When both operation and target take user input, it didn't work correctly. #491

0.66.0:

New: Following motion commands by @bronson.
- move-to-previous-end-of-word(g e)
- move-to-previous-end-of-whole-word(g E)
New: Sugar command set-register-name-to-* to use system-clipboard. #272
Breaking: Rename set-register-name-to-blackhole to set-register-name-to-_ #478, #473, #482
Breaking: move-up-to-edge and move-down-to-edge no longer move to first-line and last-line if it's not stoppable.
- This means, eliminated special handling for first-line and last-line. Just behave same as other line. #481
Doc: Fix typo and grammar for README.md by @jimt #483.

0.65.0:

Improve: Incremental-search / enter and ? enter(confirm with blank imput) repeat last-search #474, #464
New: Update backtick(`) and ' mark on jump-motion #476, #384
- So keystroke ` ` and ' ' jump back to previous position.
New: Support ' mark.
New: set-register-name-to-blackhole command(no default keymap) to make blackhole-register(_) easy-to-use #478, #473

0.64.0:

Fix: cursor-style-manager no longer throw error when executing find-and-replace:select-next in wholeline selection. #406
Fix: No longer destroy first cursor after incremental-search is executeded with multi-cursors #461
Fix: In visual-blockwise, unnecessary add selection in bottom direction when bottom selection start at column 0 #454
Fix: e(move-to-end-of-word) on blank row at the end of file freezes Atom #469

0.63.0:

New: Config option statusBarModeStringStyle(default short) #451
New, Improve: Repeate(.) command now can repeat insert-mode's delete/backspace operation #322

0.62.0:

Improve: Improve performance for f, F, t, T, Surround #448, #435.

0.61.0:

Doc: Simplify README.md
New: Sentence motion by @bronson
- move-to-next-sentence: default keymap )
- move-to-previous-sentence: default keymap (
- move-to-next-sentence-skip-blank-row: no default keymap
- move-to-previous-sentence-skip-blank-row: no default keymap
New: tab to space, space to tab conversion operator by @zhaocai #432, #433
- convert-to-soft-tab: no default keymap
- convert-to-hard-tab: no default keymap
Improve: No longer actually select to display target range for change-surround-any-pair, so cursor position is not changed when canceled.
Breaking, Improve: Use shorter, minimum length mode indcator string on status-bar #428.
Improve: More pure-vim-like behavior for # and #.
Improve: Cleanup search motion(/, ?). #440.
Breaking: Remove experimental motion and operator which was intended to replacement of f, F but was not such useful.
- SearchCurrentLine
- SearchCurrentLineBackwards
- InsertAtStartOfSearchCurrentLine
- InsertAtEndOfSearchCurrentLine
Fix: Don't pass empty array to editor.setSelectedBufferRanges, and collectly restore cursor when occurrence opeation was failed on . repeat.

0.60.1:

Fix: ;, , throw error if orignal-find-command-executed-editor was destoyed. #434

0.60.0:

Improve: Fix minor inconsistency for amount of rows to scroll between normal and visual for ctrl-f, b, d, u.
New: Smooth scroll for ctrl-f, b, d, u. Disabled by default. New config option to enable and tweak animation duration.
New, Experimental: TextObject a-edge and inner-edge(no diff for now), which select from up-edge to down-edge. No keymap by default.

0.59.0:

Breaking: j, k now always works as bufferRow-wise(screenRow-wise in previous version).
- Previous j, k behavior is available as g k, g j as like pure Vim.
New: Operator InsertAtStartOfInnerSmartWord, InsertAtEndOfInnerSmartWord no keymap by default #424
Fix: p, P mutation tracked again(was not tracked by degradation) to select-latest-changes #426
Fix: f repeat by ;, , clear existing selection where it should extend selection #425
Improve: g n and g N works more pure-vim-like.
Internal: Cleanup cursor position normalization required in visual-mode.

0.58.5:

Improve: delete-surround, change-surround no longer trim spaces when open-pair-char and close-pair-char was same(e.g 'text', "text").

0.58.4:

Fix, Degradation: Again guard in case mutation information was unavailable when tracking changes.

0.58.3:

Internal, Improve: , and ; is no longer instance of operator to avoid complexity.
Fix: Throwing error in V D keystroke. #416, #417.

0.58.2:

Fix: Guard in case mutation information was unavailable when tracking changes.

0.58.1:

Improve: Clear multiple-selection when create-persistent-selection #414
Keymap: Remove cmd-d in has-persistent-selection scope to work well with default cmd-d #413
Keymap: Add [, ] to vim-mode-plus:move-up-to-edge, vim-mode-plus:move-down-to-edge #412

0.58.0:

New: preset-occurrence #395, #396
- Allow user to set occurrence BEFORE operator.
- Keymap: In normal, visual, g o to toggle-preset-occurrence.
  - It add/remove preset-occurrence at cursor position.
  - When removing, it remove one by one, not all.
- Keymap: In incsearch input, cmd-o to add-occurrence-pattern-from-search
  - It add preset-occurrence by search-pattern.
- Following two operation do the same thing, but former is operator-modifier, later is preset-occurrence(g o).
  - c o $: change cursor-word till end-of-line.
  - g o c $: change cursor-word till end-of-line.
New: PersistentSelection: (former RangeMarker)
- Allow user to set target BEFORE operator.
- Used as implicit target of operator. As like selection in visual-mode is used as implicit target.
- Config: autoSelectPersistentSelectionOnOperate(default=true) control to disable implicit targeting.
- Updated style to seem like selection.
- Keymap: In visual, enter to create-persistent-selection.
- If you map c s to change-surround, I recommend you to disable it including other keymap starting with c.
- Following two operation do the same thing, but former target is normal selection, later target is persistent-selection.
  - V j j c: change two three line.
  - V j j enter c: change three line.
- Common use case is
  - Work on multiple target without using mouse: set multiple target by persistent-selection then mutate.
  - Narrow target range to include particular set of occurrence.
New: Highlight occurrence when occurrence modifier(o) is typed. #377
API Breaking, Improve: globalState is no longer simple object, use get, set method instead. Now observable it's change.
Breaking, Improve: When H, and L motion is used as target of operator, ignore scrolloff to mutate till visible-top or bottom row.
Breaking: clearMultipleCursorsOnEscapeInsertMode is now default false, this was changed in v0.57.0, but now reverted. #376
Fix: PreviousSelection(g v) was incorrectly shared across editor.
Fix: No longer use @syntax-result-marker-color instead use @syntax-text-color.
Improve: Gradual clearing different kind of marker(persistent-selection, occur, hlsearch).
Improve, Fix: stayOnDelete is now work properly on every situation.
Improve: Use marker to track original cursor position to stay. #380
Improve: When stayOnOperate family feature are enabled, adjust cursor position to not exceeds end of mutation #380
Improve: Crean up OperationStack. #400
Improve: Many TextObject now follow new convention(return range of text-object by getRange()).
Improve: word text-object family to select more vim-like range(don't select adjoining non-word-char like Atom's default selection.selectWord()).
Internal: Debug codes and cleanup
Internal: OperationStack::subscribe now return subscribed handler.
Internal: Split out highlightSearch concerning code as HighlightSearchManager class #398
Internal: Split out mutation concerning code in operator as MutationTracker class
Internal: Split out rangeMaker concerning code as PersistentSelectionManager class
New: VisibleArea text-object. keymap i v.
New: UnionTextObject and AFunctionOrInnerPair
Rename: Operator replace to replace-and-move-right and replace is general replace operator.

0.57.0:

Fix: a-word and a-whole-word now select leading white-space when trailing space was not exist #355
Fix: Paste(p) non-linewise text to empty line now insert text to same line, not next-line like previous version. #359.
New: When o modifier is used in operator-pending-mode, with-occurrence css scope is set to provide keymap scope.
New: Now Operator Pending status is shown on status-bar.
Internal, Improve: Operator.coffee is split out into three files and overhauled greatly #370.
New: Stay preference support for Delete, and StayOnDelete config options control this behavior.
Breaking: Removed SetCursorsToStartOfTarget, SetCursorsToStartOfRangeMarker since not used.
Improve: . repeat is no longer depend Repeat wrapper operation. Simply replayed recorded operation by operationStack.
Breaking, New: clearMultipleCursorsOnEscapeInsertMode config option with true by default.
Breaking, Experimental, New: Default keymap only available in o modifier is specified. #379
- To change occur in inner-paragraph: Can type c o p, instead of c o i p
- To change occur in a-function: Can type c o f, instead of c o a f
- To change occur in a-range-marker: Can type c o r, instead of c o a r
- To change occur in inner-current-line: Can type c o l, instead of c o i l
- To change occur in a-fold: Can type c o z, instead of c o a z
- Off course: you can do with operator other than c. e.g. d o f, g U o z.
Breaking, Degradation, Improve: To fix stale selection properties, I disabled special support for outer-vmp command which create selection.
- When outer-vmp command create selection and enter visual-mode, original cursor position is no longer preserved. e.g. cmd-l.

0.56.0:

New: Operator insert-at-start-of-occurrence, insert-at-end-of-occurrence to start insert at occurrence.
New: Operator sort #365
New: Motion search-current-line, search-current-line-backwards #366
Fix: f, F, t, T was broken, no longer focus input on repeat by ; or , #367

0.55.0:

Internal: Avoid circular referencing for string transformers store.
Doc: Update doc-string of many operator for better command report for vmp wiki.
Breaking, Improve: AddSelection no longer get word from visual-mode #351
New: All TextObject as alias of Entire. #352
Improve?, Breaking?: Change range-marker style as-if selection #357
Improve, Rename: Cleanup operator-modifier mechanism. Renamed command #357
- v: force-operator-characterwise to operator-modifier-characterwise
- V: force-operator-linewise to operator-modifier-linewise
New: Occurrence operator-modifier #357
- o in operator-pending-mode
- As like v or V modifier force the wise of operator.
- o modifier re-select cursor-word from target range.
  - e.g. g U o i p upper case all occurrence of cursor-word in paragraph
  - e.g. c i p change whole paragraph, c o i p change occurrence of cursor word in paragraph.
- This modifier is available for all operator.
- select-occurrence, map-surround is created based on this occurrence modifier.
New: Narrowed selection state #357
- is-narrow state is automatically activated/deactivated when visual-mode and last selection is multi-line.
- Available shortcut in visual-mode.is-narrow scope.
  - ctrl-cmd-c: change-occurrence to change occurrence of cursor word in selection.
  - cmd-d: select-occurrence to select occurrence of cursor word in selection.
New: RangeMarker new command.
- toggle-range-marker: remove or add range-marker
- toggle-range-marker-on-inner-word: inner-word pre-targeted version
- convert-range-marker-to-selection: add selection on all range-marker and remove range-marker after select.
New: IncrementalSearch specific /, ? special feature #357
- Direct command from search-input mini editor.
  - ctrl-cmd-c: change-occurrence-from-search to change occurrence of search pattern matched.
  - cmd-d: select-occurrence-from-search to select occurrence of search pattern matched.
  - When above command is applied operator target is automatically set in following priority.
    1. In visual-mode use current selection as target.
    2. If there is range-marker then use it as target.
    3. None of above match, then enter operator-pending state to get target from user.
Rename: add-selection to select-occurrence
Improve: reset-normal-mode clear hlsearch and range-marker more thoughtfully. No longer clear in following situation.
- Internal invocation of vimState.resetNormalMode().
- When having multiple cursor.
Internal: Define Base::initialize to be eliminate uncertainty of super call in child class. #361

0.54.1:

Breaking: Revert change introduced in 0.54.0(Was not good). insert-mode escape return to normal-mode regardless os autocomplet popup #339.

0.54.0:

Improve, Breaking: When autocomplete's popup is active, escape in insert-mode no longer escape insert-mode. #339
New: TrimString operator 'g |' for default keymap. #341
Improve, Breaking: #342 TransformStringBySelectList no longer ask target first. Instead ask target last as in normal operator.
Internal: Let each operator register itself to select-list
New, Experimental: incrementalSearchVisitDirection config option #343
- Default absolute, if relative, visit-next(tab) follows to search direction(/ or ?).
Improve: Now user can invoke add-selection from visual mode #340.
New: Add default keymap g cmd-d to vim-mode-plus:add-selection.
Improve, Breaking: Rename RangeMarker family operator, text-object to fix naming inconsistency. #346
- Operator: MarkRange to CreateRangeMarker
- TextObject: MarkedRange to RangeMarker
Fix: In case vimState is not available(not sure why), cancel execution of operation. #347
New: Add keymap to make I and A is available in all visual submode(was available in visual-block only in previous version) #348

0.53.0:

Fix: Command is dispatched to different(incorrect) editor instead of editor which fired original event. #338

0.52.0:

Doc: Update links in README.md
Improve: Suppress error when motion is pushed to operation stack when previous motion had not finished. #327
Internal: Consolidate vmp specific error class. Avoid inappropriate class inheritance.
Improve: Prevent unnecessary propagation of event for all vmp commands.
Doc: Add ISSUE_TEMPLATE.md.
New: Y in visual-mode yank whole line #330.
Improve, Breaking: Surround and ChangeSurround trim() white spaces of inner text before surround #331. by @ypresto
Improve: ctrl-f no longer put cursor to EOF instead of vimEOF.
Improve: Accuracy improved for the position where hover shows up, so ChangeSurroundAnyPair shows hover on original cursor position.
Improve: Notification warning when user enabled both vim-mode and vim-mode-plus #335.

0.51.0:

New: groupChangesWhenLeavingInsertMode setting to control whether bundle changes or not when leaving insert-mode #323. When disabled, changes are not bundled and user can undo more granular level(smaller steps). Default is true(same as pure Vim).
Mention paner in helper packages section of README.md since revived!

0.50.0:

Fix: Deprecation warning introduced by new editor.displayLayer #319.
Support: set minimum engines to 1.9.0 above.

0.49.1:

Fix: Invoking text-object command directly from insert-mode cause uncaught exception #318.

0.49.0:

Improve, Breaking: #314 Allow move-up-to-edge and move-down-to-edge stops at first or last row even if it char was blank.

0.48.0:

Improve: New command vim-mode-plus:force-operator-characterwise, vim-mode-plus:force-operator-linewise to change original wise(linewise/charactewise) and toggle exclusiveness #313

0.47.0:

Fix: TextObject a-paragraph did not select trailing blank rows for one-line non-blank paragraph #309
Breaking: Simplify TextObject comment. now a / and i / works identically #311

0.46.0:

cosmetic change, my preference about parenthesis has changed.
Improve: reversing selection by o in visual-mode make reversed state sync to lastSelection in multi-selection situation.
Fix: ctrl-f, ctrl-b, ctrl-d, ctrl-u. Just follow the way of vim-mode's fix. It was better than vmp's.
Doc: Make "disable vim-mode first" instruction standout since not small amount of user reporting issue by enabling both!

0.45.0:

Fix; . repeat collectedly replay vB range. #261
New: Support activate-normal-mode-once command #281 suggested by @wangxiexe

0.44.1:

Fix: ctrl-y, ctrl-e, throw error, and not worked properly, latent bug of vmp become obvious from Atom 1.9.0-beta0
Improve: Now 3d2w delete 6(3x2) words instead of 32 words in previous version. #289

0.44.0:

New: Improve % motion, support HTML Tag, and AngleBracket #285
Fix: Uncaught TypeError: history.getChangesSinceCheckpoint is not a function #288

0.43.0:

Fix: Don't throw error when vr in empty buffer by avoiding odd state(=visual-mode but selection is empty) #282
Improve: Refactoring
New: Operator.PascalCase by @raroman, default keymap is gC. pascase-case works like pascal-case to PascalCase.
Improve: D in visual-mode should delete whole line #284

0.42.0: Big release not for feature, but because default setting change.

Change Default: setCursorToStartOfChangeOnUndoRedo is now enabled by default.
Change Default: flashOnUndoRedo is now enabled by default.
Cleanup: Remove pollyFillsToTextBufferHistory since supported engine is already >=1.7.0.
Cleanup: Remove workaround for AutoIndent of single "\n" since v1.7.2 Atom-core includes this fix. #231
New: CompactSpaces operator(g space by default). To compacts multiple space to single space, not touch leading, trailing spaces #279.

0.41.0:

New: Add service observeVimStates, onDidAddVimState and vimState::onDidSetMark #276

0.40.1:

Breaking: Rename split-character to split-by-character.
Fix: ctrl-y, ctrl-e. Just follow original vim-mode fix. #275

0.40.0:

Improve: Test spec now support more concise keystroke syntax and all spec rewritten to use new keystroke #270
New: add experimental startInInsertModeScopes configuration to selectively start in insert-mode for specified scopes.

0.39.0:

Improve: Now selectAllInRangeMarker can pick word from visual selection.
Improve: selectAllInRangeMarker can switch regex's word boundary option \b based if in visual-mode.
New: Motion YankToLastCharacterOfLine for user who don't like default Y include newline #265.
New: New setting option to suppress highlightSearch for certain scopes
Improve: No longer use custom marker property since it's deprecated in v1.9.0 #242
Improve: Use display-layer methods #242
Improve: Use clipDirection instead of clip for screenPosition clipping #242
Fix: w now can move to next line in CRLF file #267

0.38.0:

Improve: #259 *, # now pick search word under cursor in the same manner where selection.selectWord() pick word.
Breaking: #259 Remove hidden vim-mode-plus.iskeyword configuration option.
Fix: Make MoveToMark executable from command-pallate #252, #254.
Improve: highlightSearch no longer extend highlight marker even when character inserted at intersecting tail.
Improve: #262 Now maximize-pane can maximize none-editor paneItem such as setting-view, markdown-preview.
Breaking: #262 maximize-pane is mapped from ctrl-w z(for all) and cmd-enter(for mac) by default.
New: #262 New config hideTabBarOnMaximizePane(enabled by default). Disabling it keep tab-bar when maximized.
Fix: #258 f command occasionally throw error, so I simply revert to former code which use panel to attach hidden mini-editor.

0.37.1:

Fix: #258 f, F fail after paneItem change then back to original paneItem.

0.37.0:

Fix: #252, #254 No longer use input mini editor for single char input for mark
Internal: make command event accessible via vimState while running command
Improve: If hide option is set on Input::focus() it don't add Panel
Fix: #253 fix r in vB

0.36.0:

Internal: Eliminate view/model separation for Hover and HoverElement.
New: SearchMatchForward(gn), SearchMatchBackward(gN) text-object. #241
Fix: Don't clear maximized state when active item changed in same pane #244
New: AddSelection operator #245
Dev: add npm run watch
New: Preserve <, > mark for visual start and end.
New: PreviousSelection text-object vB still not supported #246
New: MarkRange operator and MarkedRange text-object #249
New: Config option to clear HighlightSearch and RangeMarker on escape in normal-mode. #250
Improve: Support InsertAtStartOfSelection from vC mode, no longer need to enter vB only for insert at start of selection.
Breaking: MoveTo(Previous/Next)FoldStart no longer linewise motion.
New: General insertion operator MotionByTarget
New Experimental new Operator SetCursorsToStartOfTarget and MarkedRange precomposed version.
Internal: Do editorElement className update manually.

0.35.1:

Fix: Ignore mouseup event handling on insert mode #240

0.35.0:

Internal: Gradually making motion into pure point calculator #225
Improve: Operate on same range on . repeat even if stayOnTransformString was enabled #235
New: MoveToColumn motion. Default keymap is |. #230
Improve: dblclick correctly activate visual mode, simplify mouse event observer. #228
Improve: Better integration with Atom's native commands(e.g cmd-l) #239

0.34.0:

Fix: gg, GG throw error when destination row was blank line. #233
Fix: Critical bug TextBuffer.history pollyfilled multiple times because of incorrect guard #229

0.33.0:

Support: set minimum engines to 1.7.0 above.
Internal: Cleanup blockwise-selection.
Internal: Now modeManager::activate take only true mode(no longer handle reset, previous as former version).
Breaking: Rename activate-previous-visual-mode to select-previous-selection
Experiment: Trying to not depend on atom's Selection::selectWord. #225
Experiment: Trying being independent from atom's imperative cursor motion. #225
Breaking: #224 remove Move(Up|Down)ToNonBlank
Fix: Don't move cursor up when inserting single white space at column 0 #226
Fix: To support Atom v1.7.0, polyfill for TextBuffer::history.getChangesSinceCheckPoint #229
Fix: cc, S ignore auto indent on Atom v1.7.0 #231

0.32.1:

Fix: Uncaught error on y, gU etc.. in vB when stayOnYank, stayOnOperator enabled #221.

0.32.0:

Improve: Further coverage of gv support. Not yet complete but much better.
Improve: Respect stayOnYank, stanOnOperate on visual-mode #221
Fix: TransformStringByExternalCommand throw error on OperationStack::finish because of incorrect argument.
Fix: Correctly unfocus input mini editor when SurroundAnyPair can't find(detect) pair chars..
Internal: Update charactewrise selection properties in visual-mode selection modification by Motion, TextObject.
Improve: Don't flash in visual-mode even if flashOnOperate have enabled.

0.31.0:

Fix: Guard for calling refreshHighlightSearch against destroyed editor #196
Internal: Quit model, view separation for Input and SearchInput
Rename: misc-commands.coffee to misc-command.coffee
Internal: move scroll.coffee code to misc-command.coffee
New: add SmartWord based motions(MoveToNextSmartWord, MoveToPreviousSmartWord, MoveToEndOfSmartWord)
Fix: goalColumn incorrectly reset on vL mode. #220
Improve: keep goalColumn in vL to vC, vC to n.

0.30.0

Fix: No longer necessary to set editor.useShadowDOM enabled to use vmp #218
New: [Experimental] Set yank-pending, delete-pending scope for granular keymap setting #215.

0.29.0

Improve: cleanup operation-stack.coffee
Internal: New convention. use Operator::mutateSelection
Improve: Reduce complexity for MoveToNextWord #200
Internal: improve Base::countTimes pass isLast as 2nd arg
Fix: For $ motion with count now correctly move to end of line of Nth line blow.
Improve: Now support all motion in visual-blockwise #213
Internal: Remove many visual-blockwise special code #213

0.28.0

Internal: Each command class can answer its description.
Internal: Generate summary table for all commands.
Internal: Remove VisualBlockwise class #210.
Improve: c on visual-blockwise now keep multi-cursors.
Fix: null guard in case Patch is not yet available for >=Atom v1.7.0-beta0

0.27.0

Internal: Refactoring many parts(Search, MatchList, ModeManager, OperationStack) #200
Improve: Support upcoming Atom 1.7+ text-buffer change #206, #203
New: New Motion for alphaNumeric word family #207
- MoveToNextAlphanumericWord for w
- MoveToPreviousAlphanumericWord for b
- MoveToEndOfAlphanumericWord for e
Fix: Tweak L(MoveToBottomOfScreen) motion don't cause scroll.
Internal: Reuse Select, CurrentSelection instance, hope improve #162
Internal: Introduce Sugar methods on Base.prototype for instanceof check

0.26.1

Fix: n, N in different editor cause flashScreen is not function.

0.26.0

Breaking: Remove scroll among search matched feature #201
Breaking: Literal input mode in Search input field is now achieved by standard selector-specific keymap. User who used this feature in older version need to update keymap selector to atom-text-editor.vim-mode-plus-search:not(.literal-mode). See example in wiki/Keymap-example
Internal: cleanup Search, SearchCurrentWord.
Fix: Use new pane split feature from Atom v1.6.0 #204
Support: set minimum engines to 1.6.0 above #204
Breaking: Remove semi-broken disableInputMethodExceptInsertMode setting #205
Fix: o after Vjj then cmd-shift-d display cursor incorrect position(cosmetic). #202

0.25.0

Improve: #192 Keep original visible area as much as possible when scrolling by n, N, /, ? to avoid mental context switching
New: delete/change-any-pair-allow-forwarding. More powerful version of existing change-surround-any-pair and delete-surround-any-pair #194
Improve: #195 keep code layout when surround, delete-surround, change-surround. former implementation mechanically trim() white space of inner string.

0.24.0

Fix: Inconsistency for changed area for P, p. And respect original newline on EOF.
New: PutAfterAndSelect and PutBeforeAndSelect to paste and select #184
New: allow-forwarding text-object #188
Spec: Improve test coverage for % motion
Improve: Fix several minor bug for % motion.
Improve: Fix several minor bug for pair text-object.
Fix: Now c can enter insert mode even if target is empty. #189
Fix: Don't treat double backslash \ as escape char in TextObject.Pair family #191
New: innerTag and aTag text object. #84

0.23.0

Fix: setHover error. Guard when vimState::getBlockwiseSelections() is empty.
Fix: ctrl-v then j throws error "Cannot read property 'getHead' of undefined" #179
New: SwapWithRegister operator to complement v_p and v_P in pure Vim #180. keymap is disabled by default.
Internal: Greatly simplify cursor offset calculation by using Point::traveralFrom()
Fix: visual-blockwise j, k always work bufferRow-wise and never past BOL and EOL #10.
New: new config options ignoreCaseForSearch, ignoreCaseForSearchCurrentWord, useSmartcaseForSearchCurrentWord #181

0.22.1

Fix: Quick fix for degradation for issue cursorDOM node is not exits #178

0.22.0

New: Add space when surround if input char is in charactersToAddSpaceOnSurround. #171
Improve: Cancel search when tab was switched in the middle of searching.
Internal: cmd keystroke support for spec helper
Improve: Warn user when useShadowDOM disabled #177
Fix: Prevent ReplaceModeBackspace is invoked except from replace-mode #175

0.21.3

Fix: subscription leak for highlightSearch #158
Improve: blockwiseSelection, getHeight(), setSelectedBufferRanges().
New: vimState.getBlockwiseSelections()
Fix: Hover place was incorrect when visual-blockwise and its selection is reversed.
Internal: Avoid mode change within visual-blockwise and remove dirty operation.isProcessing() guard in modeManager::restoreCharacterwise()
Fix: MoveToFirstCharacterOfLineDown and Up shold work as buffer-positoin-wise. #166

0.21.2

Fix: #161 gv not re-select last selection after Yank in visual-mode.
Fix: #163 occasional Uncaught TypeError: event.target.getModel is not a function when executing vmp commands.

0.21.1

Internal: cleanup blockwiseSelection.
Fix: #158 When highlight cleared, it should not highlighted again on refreshing event(scroll, switch pane).
Fix: #158 Maker default flash color transparent(fadeout 50%) to not hide overlapping text when text color is same as flash color.

0.21.0

Fix: Bump up engines version to atom 1.4.0 above.
Fix: In visual-linewise, position of hover indicator was incorrect.
New: highlight last search pattern across all buffer. #158
- highlightSearch config parameter to enable/disable.
- vim-mode-plus:toggle-highlight-search: to toggle highlightSearch config value.
- vim-mode-plus:clear-highlight-search: one-time clearing for highlightSearch. equivalent to :nohlsearch in pure Vim.
Fix: Guard for case when editorElement.component is not available #98

0.20.0

Fix: Search flash no longer flash multiple word simultaneously. #153
Fix: flashOnSearch configuration parameter was not checked on flash. - @crshd
Fix: dw, dW don't go beyond EOL on last movement in single transaction. #150
Fix: Respect and observe editor.lineHeight and refresh cursorStyle on change #154. - @crshd, @t9md
Internal: New dev-mode command toggle-reload-packages-on-save to reload vmp on buffer save.
Internal: New dev-mode command reload-packages to reload vmp and vmp plugins
Internal: Making vmp package hot reload-able to make development easier.
New: Provide css id for status-bar container so that user can hide status information completely #152
New: New options to disable Input Method(IME) except insert-mode #148.
Improve: Full-support for multiple blockwise selections, each blockwise selections are kept in vimState.blockwiseSelections.

0.19.1

Internal: Allow Operation specific command scope #147.
Internal: New swrawp::switchToLinewise() util to switch selection temporarily.
Internal: Now countTime() is Base methods.
Internal: Remove toggleClassByCondition() utils. Instead, use native classList.toggle().
Internal: swrap::translate() function arguments was inconsistent with wrapping Range::translate() function.

0.19.0

Breaking: Remove move-line-up, move-line-down, it is externalized as move-selected-text plugin package #145.
New: Operator::execute() now can do asynchronous operation(can return instance of Promise). #146.
Internal: Consolidate counter-manager.coffe into vimState.
Improve: Several refactoring. spec-helper keystroke now support waitsForFinish to wait operationFinish for asynchronous operation.

0.18.2

Bug: TransformStringBySelectList fail because of un-registered SortNumerical member left by development.

0.18.1

Internal: Fix naming inconsistency
New: Provide getCommand, getStdin, getStdout as hook for TranformStringByExternalCommand
Improve: Error handling for TranformStringByExternalCommand.
New: TransformString::getNewText pass selection as 2nd args.
New: #143, suspend/unsuspend execution of operation to make async method involved operation repeatable.

0.18.0

New: TranformStringByExternalCommand #140
Doc: Update old wiki link in Readme
Improve: Use more accessible displayName for TransformStringBySelectList
Internal: No longer use short variable name like c for cursor, s for selection .
Internal: Refactoring. extract restorePoint logic from Operator::eachSelection method.
Internal: Provide wrapper function Base.processOperation(), Base.cancelOperation() to controll operationStack.
New: #142 Support per selection clipboard for Change, Delete, Yank operation.
Fix: #141, For Change operation, if target is TextObject, it auto-detect target's wise(linewise, characterwise)

0.17.0

New: InsertByMotion can insert after move, and repeatable.
New: Support insert count e.g 10iabc, 10oabc.
Spec: #137 dot register, insertion count, insert-last-inserted
New: TextObject.SmartWord which is just include dash(-) char into \w
New: SurroundSmartWord is pre-targeting InnerSmartWord
New: Operator EncodeUriComponent, DecodeUriComponent
New: Operator TitleCase
New: #139 support SelectList UI
New: #138, #139 Operator TransformStringBySelectList transform string by choice

0.16.0

Fix: Don't change submode from characterwise to linewise automatically #131.
Internal: new TextObject::allowSubmodeChange property control automatic submode shift from selected range.
New: Fix: As part of fix from Atom v1.4.0 change, Paragraph motion was completely rewritten, now more compatible behavior to pure Vim.
New: Configuration parameter flashOnOperateBlacklist allow disable flash for specific operation.
Improve: Now move-to-blank, move-to-edge works correctly for hardTab language buffer like golang.

0.15.0

Improve, New: TextObjet.Fold can expand when repeated!
Improve: Spec for TextObject.Fold, Motion.MoveUpToEdge
New: insert-at-previous-fold-start, insert-at-next-fold-start
New: move-to-position-by-scope as parent class of every scope based motion.
New: move-to-next-string, move-to-previous-string
New: move-to-next-number, move-to-previous-number
Internal: Reporting command in dev-mode which report commands which have no default keymap.
FIX: Disable strict check of non-empty selection in normal-mode at the timing of operation finished. #123.

0.14.1

Fix: I doesn't go to first char if already there. #122.

0.14.0

New: Misc.Maximize-pane command from my paner package.
Fix: Selecting big text object(its range is not fit in one screen) lost cursor marker #109.
Breaking: BracketMatchingMotion is completely rewritten and renamed to MoveToPair(move-to-pair).
Internal: TextObject Pair improved(pre-split pairChars, provide more granular range info) #113.
Improve: Improve error message in OperationStack throw error related to #114.
Improve: TextObject.Pair don't select first line when its text is opening pair char only #111.
Internal: New convention all TextObject must implement selectTextObject function.
New: Move(Up|Down)ToEdge to moveUP/Down only edge row.
New: MoveTo(Previous|Next)FoldStartWithSameIndent. to skip different indentation row.
Internal: commands for speedup development.
FIX: e, E should skip blank line #117.
FIX: w, W moved to endOfWord instead of beginningOfWord when cursor is trailing white space.
FIX: dk not delete blank line if cursor is at blank row #118.
FIX: j, k in visual-linewise should not expand folds, but was expanded #120.
Internal: Refactor Motion::selectInclusive() now almost finished!
New: Base.commandPrefix class variable is used as command name prefix(for user's custom command use).
New: Operator.Reverse to reverse selected lines.

0.13.0

New: Motion move-(up|down)-to-non-blank to move up/down by skipping blank characters #101.
New: Motion move-to-(previous|next)-fold-(start|end) to move around code folds #102
FIX: TextObject Paragraph and its child class get called getRange with negative row number fix #99
FIX: When last line have no newline("\n") char, cursor marker shown at incorrect place #100
FIX: Select operator should not be repeatable, but was repeatable(that cause unexpected error).
FIX: When r(replace operator) in visual-blockwise mode cause Selection is not empty in normal-mode error #104
Internal: move ModeManager::replaceModeBackspace to Misc commands
Internal: Service API no longer expose vim-mode-plus's subscriptions
Internal: New Base.reset() class method to reload all commands to speed up development process.

0.12.0

Internal: cleanup cursor movement in Motion::selectInclusive() #87
Internal: remove flashManager class. move flashManager feature to utils.coffee.
Internal: spec-helper mini DSL now can check characterwiseHead in V scenario. #90
FIX: Stacktrace is not displayed for OperationStackError.
FIX: When shift from visual-blockwise to other modes, cursor marker get odd. #71
Breaking: remove vim-mode-plus:set-count, and provide distinct vim-mode-plus:set-count-1 and alike #63
Improve: Accuracy improved for cursor movement in visual-linewise for *, #, /, ? commands. #91
FIX: TextObject CurrentLine should work on bufferRow instead of screenRow #95
FIX: goalColumn is not respected in visual-line j, k on soft-wrapped line #96
FIX: visual-linewise cursor marker is incorrect in soft-wrapped line. #97
Internal: visual mode's cursor display functions are separated from vimState into cursorStyleManager #97

0.11.0

FIX: #86 Repeating text-object targeted operation(e.g. ciw then .) incorrectly activate characterwise visual-mode.
FIX: Work around issue #85 issue vim-mode-plus with term2 package.
NEW: support characterwise movement in visual-linewise mode #74, #83.

0.10.2

FIX: When buffer is soft-wrapped and in visual-characterwise mode, moving selection put cursor on incorrect position #81
FIX: wrapLeftRightMotion parameter is not respected in visual-mode and soft-wrapped buffer's normal-mode. #82

0.10.1

FIX: Critical degradation, when selection whole buffer with cmd-a, exception thrown.

0.10.0 [CAUTION] Surround operation keystroke changed.

Breaking: Surround take target before reading surround-char #75
- ex-1: ys mapped to vim-mode-plus:surround
  - old: ys(iw
  - new: ysiw(
- ex-2: ms mapped to vim-mode-plus:map-surround
  - old: ms(ip
  - new: msip(
Breaking: Remove default keymap of surround like gss, gsw, gsd, gsc.
FIX: gg and G should go to buffer line instead of screen line.
FIX: SelectLatestChange didn't correctly restore visual submode.
FIX: Increment, Decrement didn't clear selection on finished.
FIX: v , escape on empty-line put cursor one-line down in corner case #70
FIX: degradation, G should use bufferRow than screenRow.
Improve: a check cursor.isAtEndOfLine() for each cursor in multi-cursor.
Improve: When Surround target is linewise area, it insert line break char #78.
Internal: Cleanup selection, cursor adjustment for consistent moveCursor behavior in both normal and visual mode #73.
Internal: Remove debug feature for OperationStack #72
Internal: Now throw error when selection is not empty in normal-mode at operation finished to strictly catch unexpected operation result.
Internal: dd, yy, gUgU like sequential operation support now done in OperationStack.
Improve: Visual characterwise mode keep tailRange correctly when selection is indentation white spaces char. #79
Internal: Separate big spec files into small topic based spec file.

0.9.1

Further accuracy improve for cursor not past last newline #56.
BUG: V, escape on empty-line put cursor one-line down than expected row #70

0.9.0

Improve: Tweak default add/change color of undo/redo operation.
FIX: Cursor visibility in cmd-d operation. #55
FIX: Cursor visibility in visual-line mode on last line of buffer.
FIX: Change operator wasn't atomic(not in one transaction) in multi-cursor #57.
FIX: SurroundWord operator eat extra whitespace. #58
New: MapSurround operator to apply surround operation to each word in targeted area.
New: ToggleFold misc command to toggle fold at cursor row. Default keymap is za
FIX: F/T should be exclusive(exclude char under cursor) when used as operator's target but was inclusive. #62
FIX: Add keymap down, up in visual-block-mode #64
Internal: Revival of once removed atom.commands.onDidDispatch observation to track selection change.
Improve: Accuracy improve for behavior when setCursorToStartOfChangeOnUndoRedo is enabled.
New: LatestChange text-object. Which area is defined between [ and ] marker.
Breaking: Rename vim-mode-plus:split to vim-mode-plus:split-string to avoid confusion.
Don't allow cursor past last newline by vim-mode-plus's operation #56.

0.8.0

New: provideVimModePlus service API now provide Base class and subscriptions.
Internal: Remove dynamic derivation for (a, inner) TextObject for consistency.
Doc: Most of sections are moved to vim-mode-plus Wiki and remove old documents.
Improve: Change operator properly update change marker([, ])
Internal: Refine definition for what isComplete() is.
New experiment: Split operator to split selected line by string entered.
New experiment: Performance effective(in big buffer) version of move-line-up/down operator.
Internal: Remove direct referencing to settings parameter in hover instance.
Improve: hover can show input char even in oneChar input operator like Surround.
Improve: hover sync text when multi-char input text is deleted for operator like ChangeSurround. #42
New improve: [Experimental] Show cursor position in visual-linewise. #45
Improve: Change won't enter insert-mode if target object is not found like in case ci( failed.
Improve: All Pair text-object properly select text-object in case char under cursor is closing pair. #48
FIX: Prevent vim-mode-plus's command become available in mini-editor. #50
FIX: p, P insert extra newline when line ending is CRLF #49.
FIX: dd, dk remove extra line when its executed last line of buffer. #43

0.7.1

Improve cursor position on Undo/Redo when setCursorToStartOfChangeOnUndoRedo is enabled.

0.7.0

FIX: hover didn't cleared when ; was repeated without previous find.
Improve: Flasher.flash do simply flash removed callback args for simplicity.
New: Introduce onDidSelect, onWillSelect, onDidOperationFinish internal event system.
Improve: Now most of operation is child of TransformString class
Breaking: deprecated parameter 'stayOnIndent', 'stayOnReplaceWithRegister', merged to 'stayOnTransformString'
New: Introduce g J join-with-keeping-space commands
New: Introduce JoinByInput, JoinByInputWithKeepingSpace(default no keymap) [experimental]
New: Option to put cursor start of change on Undo/Redo
New: Option to flash on Undo/Redo(green: addded, red: removed) by option flashOnUndoRedo
New: Support mark [, ] which is updated on yank and change.
New: select-latest-change command select range from mark [, ]) command(no keymap by default)
New: track change when insert-mode repeated.

0.6.1

FIX: Paste fail when flashOnOperate was disabled. #38

0.6.0

FIX: incorrect cursor position when escaped from visual-linewise
Improve: operator.coffee is now more readable by power of @eachSelection abstracts final cursor position handling.
New: stayOnReplaceWithRegister, stayOnYank, stayOnIndent to stay same cursor position after operation finished.
Improve: InsertLastInserted is now accurate by refactoring ActivateInsertMode and its descendants.

0.5.0

FIX: spec bug, revealed by validating spec-helper's mini-DSL options.
Improve: Lots of test spec refactored.
Improve: Refactoring TransactionBundler used in ActivateInsertMode.
New: [Experimental] introduce increment/decrement operation g ctrl-a, g ctrl-x.
FIX: incremental-search throw error: findFoldMarkers need explicit filter query object from Atom 1.3.0.
New: [Experimental] new InsertLastInserted in insert-mode(ctrl-a in pure Vim).
New: keymap ctrl-h in replace-mode.

0.4.0

Add spec for visual-blockwise to visual-characterwise shift
New: ^ mark which store last insert-mode position.
New: gi to start insert-mode from last-insert position(^ mark).
New: when count is specified with-count selecter is set on editorElement
New: when register is specified with-register selecter is set on editorElement
New: N% motion N is count. In 100L buffer, 50% move cursor to 50L.
New: gv support all sumbmode(characterwise, linewise, blockwise).
New: increase, decrease support in visual-mode which greatly extends usage of these commands.
Tweak: don't clear multi-selection when from char-2-block if only selection is single line, this allow cmd-d, ctrl-v, I(or A) work.

0.3.0

FIX: #31 RepeatSearch(n) commands repeat last search regardless success or not.
No longer add commands per editorElement, commands are added on activate phase once.
Now each operations(TextObject, Motion, Operator etc) can registerCommands().
Base.init() do all necessary initialization.
Improve BlockwiseSelect when softwrapped.
Add spec for visual-blockwise mode.

0.2.0

Cleanup: globalState no longer instance of class, and nor property of vimState, since its global. It should be treated as like settings.
New: #24 now folds kept closed when selection go over folded area. l, h expand folds as like Vim.
Recorded operation history is no longer extended infinitely, just keeping one lastRecordedOperation is enough.
Remove old meaningless(anymore) pushSearchHistory, getSearchHistoryItem on vimState.
Move misc commands(like vimState::reverseSelection) to separate misc-commands.coffee so now processed by operationStack good for consistency.
Support count for BlockwiseMoveUp and BlockwiseMoveDown.

0.1.11

FIX #26: incorrect cursor position when escaped from visual-blockwise mode.
FIX #27: Coludn't escape from visual-mode if non-left mouse button is used during drug. Thanks @jackcasey for first PR.
Refactoring: visual-blockwise and fix corner case bug in shift submode within visual-mode.
Refactoring: Cleanup mode-manager.coffee, now use Disposable::dispose when deactivating old mode etc...

0.1.10

Now warn to console if duplicate constructor name is used, this is only for safe guard when developer add new TOM.
Improve accuracy of TextObject.Function for language which have meta.function scope.
Lots of cleanup/refactoring
Now commands are dispatched via vimState::dispatchCommand which translate command name to klassName with special translation for TextObject

0.1.9

Explicitly {autoscroll: false} when selection modified by j, k to avoid tail of selection on each movement. #23
Partially implemented to not expand fold when selection across folded area. folds are expanded by l, h movement.
Add keymap for home, end key.

0.1.8

FIX deprecation warning for Atom 1.1.0
Bump supported engines to >=1.1.0
FIX zs ze broken
FIX c-f, c-b, c-u, c-d broken after Atom 1.1.0, Fix in 0.1.7 was quick fix and not appropriate behavior.

0.1.7

New config option to disable 'flashScreenOnSearchHasNoMatch'.
Don't use atom.commands.onDidDispatch.
FIX: selectBlockwise select incorrect range in some situation.
clear hover if ChangeSurroundAnyPair fail to find pair
FIX: c-f,c-b,c-u,c-d broken after upgrading Atom 1.1.
FIX: visual block $A operation put cursor on beginning of next line.

0.1.6

FIX: shift from visual-char2block incorrectly add extra selection when rows contain blank row.
FIX: p and P didn't correct replace text in visual-linewise mode.

0.1.5

FIX: In softwrapped line, moveDown/moveUp fail in visual-linewise mode.

0.1.4

FIX: cursor not when activate visual-blockwise with one clumn selection.
FIX: move-down, move-up on visual-blockwise throw error when not have tail.
Revival once disabled text-object quote to select forwarding range.
New: TextObject.AnyQuote select any next AnyQuote within line.

0.1.3

Now all TextObject Pair can expand selection.
Fix TextObject AnyPair incorrectly expand selection when it fail to find pair.

0.1.2

Add default keymaps on incremental search element for arrow and tab keys.
FIX: debug feature was broken
FIX:#4 select area when TextObject is executed via command-pallate(was throw err).

0.1.1 first public release of vim-mode-plus.

1st public release

0.1.0

2015.9.21 rename vim-mode to vim-mode-plus

0.0.0 vim-mode-plus started as fork of vim-mode

2015.8.1 forked from vim-mode.

0.57

Added replace ('R') mode! - @jacekkopecky
Added the iW and aW text objects! - @jacekkopecky
Made the 't' operator behave correctly when the cursor was already on the
searched character - @jacekkopecky
Fixed the position of the cursor after pasting with 'p' - @jacekkopecky

0.56

Renamed 'command mode' to 'normal mode' - @coolwanglu

0.55

Fixed indentation commands so that they exit visual mode - @bronson
Implemented horizontal scrolling commands z s and z e - @jacekkopecky

0.54

Fixed an error where repeating an insertion command would not handle characters inserted by packages like autocomplete or bracket-matcher - @jacekkopecky

0.53

Fixed an exception that would occur when using . to repeat in certain cases.

0.52

Fixed incorrect cursor motion when exiting visual mode w/ a reversed selection - @t9md
Added setting to configure the regexp used for numbers and the ctrl-a and ctrl-x keybindings - @jacekkopecky

0.50

Fixed cursor position after dd command - @bronson
Implement ap text-object differently than ip - MarkusSN

0.49

Fixed an issue that caused the cursor to move left incorrectly when near the end of a line.

0.48

Fixed usages of deprecated APIs

0.47

Fixed usages of deprecated APIs - @hitsmaxft, @jacekkopecky

0.46

Fixed issues with deleting when there are multiple selections - @jacekkopecky
Added paragraph text-objects 'ip' and 'ap' - @t9md
Fixed use of a deprecated method - @akonwi

0.45

Added ctrl-x and ctrl-a for incrementing and decrementing numbers - @jacekkopecky
Fixed the behavior of scrolling motions in visual mode - @daniloisr

0.44

Fixed issue where canceling the replace operator would delete text - @jacekkopecky
Implemented repeat search commands: '//', '??', etc - @jacekkopecky
Fixed issue where registers' contents were overwritten with the empty string - @jacekkopecky

0.43

Made '%', '*' and '#' interact properly with search history @jacekkopecky

0.42

Fixed spurious command bindings on command mode input element - @andischerer

0.41

Added ability to append to register - @jacekkopecky
Fixed an issue where deactivation would sometimes fail

0.40

Fixed an issue where the search input text was not visible - @tmm1
Added a different status-bar entry for visual-line mode - @jacekkopecky

0.39

Made repeating insertions work more correctly with multiple cursors
Fixed bugs in * and # with cursor between words - @jacekkopecky

0.38

Implemented change case operators: gU, gu and g~ - @jacekkopecky
Fixed behavior of repeating I and A insertions - @jacekkopecky

0.36

Fixed an issue where d and c with forward motions would sometimes incorrectly delete the character before the cursor - @deiwin

0.35

Implemented basic version of i t operator - @neiled
Made t motion repeatable with ; - @jacekkopecky

0.34

Added a service API so that other packages can extend vim-mode - @lloeki
Added an insert-mode mapping for ctrl-u - @nicolaiskogheim

0.33

Added a setting for using the system clipboard as the default register - @chrisfarms

0.32

Added setting for allowing traversal of line breaks via h and l - @jacekkopecky
Fixed handling of whitespace characters in B mapping - @jacekkopecky
Fixed bugs when using counts with f, F, t and T mappings - @jacekkopecky

0.31

Added '_' binding - @ftwillms
Fixed an issue where the '>', '<', and '=' operators would move the cursor incorrectly.

0.30

Make toggle-case operator work with multiple cursors

0.29

Fix regression where '%' stopped working across multiple lines

0.28

Fix some deprecation warnings

0.27

Enter visual mode when selecting text in command mode
Don't select text after undo
Always preserve selection of the intially-selected character in visual mode
Fix bugs in the '%' motion
Fix bugs in the 'S' operator

0.26

Add o mapping in visual mode, for reversing selections
Implement toggle-case in visual mode
Fix bug in 'around word' text object

0.25

Fixed a regression in the handling of the 'cw' command
Made the replace operator work with multiple cursors

0.24

Fixed the position of the cursor after certain yank operations.
Fixed an issue where duplicate vim states were created when an editors were moved to different panes.

0.23

Made motions, operators and text-objects work properly in the presence of multiple cursors.

0.22

Fixed a stylesheet issue that caused visual glitches when vim-mode was disabled with the Shadow DOM turned on.

0.21

Fix issue where search panel was not removed properly
Updated the stylesheet for compatibility with shadow-DOM-enabled editors

0.20

Ctrl-w for delete-to-beginning-of-word in insert mode
Folding key-bindings
Remove more deprecated APIs

0.19.1

Fix behavior of ctrl-D, ctrl-U @anvyzhang
Fix selection when moving up or down in visual line mode @mdp
Remove deprecated APIs
Fix interaction with autocomplete

0.19

Properly re-enable editor input after disabling vim-mode

0.17

Fix typo

0.16

Make go-to-line motions work with operators @gittyupagain
Allow replacing text with newlines using r @dcalhoun
Support smart-case in when searching @isaachess

0.14

Ctrl-c for command mode on mac only @sgtpepper43
Add css to status bar mode for optional custom styling @e-jigsaw
Implement -, +, and enter @roryokane
Fix problem undo'ing in insert mode @bhuga
Remove use of deprecated APIs

0.11.1

Fix interaction with autocomplete-plus @klorenz

0.11.0

Fix gg and G in visual mode @cadwallion
Implement % @carlosdcastillo
Add ctags keybindings @tmm1
Fix tracking of marks when buffer changes @carlosdcastillo
Fix off-by-one error for characterwise puts @carlosdcastillo
Add support for undo and repeat to typing operations @bhuga
Fix keybindings for some OSes @mcnicholls
Fix visual ngg @tony612
Implement i{, i(, and i" @carlosdcastillo
Fix off by one errors while selecting with j and k @fotanus
Implement 'desired cursor column' behavior @iamjwc

0.10.0

Fix E in visual mode @tony612
Implement `` @guanlun
Fix broken behavior when enabling/disabling @cadwallion
Enable search in visual mode @romankuznietsov
Fix end-of-line movement @abijr
Fix behavior of change current line cc in various corner cases. @jcurtis
Fix some corner cases of w @abijr
Don't hide cursor in visual mode @dyross

0.9.0 - Lots of new features

Enable arrow keys in visual mode @fholgado
Additional bindings for split pane movement @zenhob
Fix search on invalid regex @bhuga
Add s alias to visual mode @tony612
Display current mode in the status bar @gblock0
Add marks (m, `, ') @danzimm
Add operator-pending mode and a single text object (iw) @nathansobo, @jroes
Add an option to start in insert mode @viveksjain
Fix weird behavior when pasting at the end of a file @msvbg
More fixes for corner cases in paste behavior @SKAhack
Implement * and # @roman
Implement ~ @badunk
Implement t and T @udp

0.8.1 - Small goodies

Implement ctrl-e and ctrl-y @dougblack
Implement /, ?, n and N @bhuga
Registers are now shared between tabs in a single atom window @bhuga
Show cursor only in focused editor @tony612
Docs updated with new methods for entering insert mode @tednaleid
Implement r @bhuga
Fix w when on the last word of a file @dougblack
Implement = @ciarand
Implement E motion @tony612
Implement basic ctrl-f and ctrl-b support @ciarand
Added +, * and % registers @cschneid
Improved ^ movement when already at the first character @zenhob
Fix off-by-one error for 15gg @tony612

0.8.0 - Keep rocking

API Fixes for Atom 0.62 @bhuga
Add $ and ^ to visual mode @spyc3r
Add 0 to visual mode @ruedap
Fix for yanking entire lines @chadkouse
Add X operator @ruedap
Add W and B motions @jcurtis
Prevent cursor left at column 0 when switching to insert mode @adrianolaru
Add pane switching shortcuts see #104 for details @dougblack
Add H, L and M motions @dougblack

0.7.2 - Full steam ahead

Leaving insert mode always moves cursor left @joefiorini
Implemented I command @dysfunction
Restored 0 motion @jroes
Implemented } motion to move to previous paragraph @zenhob
Implement gt and gT to cycle through tabs @JosephKu
Implement visual linewise mode @eoinkelly
Properly clear selection when return to command mode @chadkouse

0.7.1 - User improvements

ctrl-[ now activates command mode @ctbarna
enter now moves down a line in command mode @ctbarna
Documentation links now work on atom.io @michaeltwofish
Backspace now moves back a space in command mode @Tarrant
Fixed an issue where cursors wouldn't appear in the settings view.

0.7.0 - Updates for release

Update contributing guide
Update package.json
Require underscore-plus directly

0.6.0 - Updates

Implemented . operator, thanks to @bhuga
Fix putting at the end of lines, thanks to @bhuga
Compatibility with Atom 0.50.0

0.5.0 - Updates

Switches apm db to buttant from iriscouch

0.4.0 - Updates

Compatibilty with Atom 26

0.3.0 - Visual and Collaborative

Compatiblity with atom 0.21
Characterwise visual-mode!
System copy and paste are now linked to the *
Implement A operator
Bugfixes concerning b and P

0.2.3 - Not solo anymore

Major refactoring/cleanup/test speedup.
Added S command.
Added C operator.
Proper undo/redo transactions for repeated commands.
Enhance G to take line numbers.
Added Y operator.
Added ctrl-c to enter command mode.

0.2.2

Added s command.
Added e motion.
Fixed cw removing trailing whitepsace
Fixed cursor position for dd when deleting blank lines

0.2.1

Added the c operator (thanks Yosef!)
Cursor appears as block in command mode and blinks when inserting (thanks Corey!)
Delete operations now save deleted text to the default buffer
Implement gg and G motions
Implement P operator
Implement o and O commands

0.2.0

Added yank and put command with support for registers
Added $ and ^ motions
Fixed repeats for commands and motions, ie d2d works as expected.
Implemented D to delete through the end of the line.
Implemented >> and << indent and outdent commands.
Implemented J.
Implemented a to move cursor and enter insert mode.
Add basic scrolling using ctrl-u and ctrl-d.
Add basic undo/redo using u and ctrl-r. This needs to be improved so it understands vim's semantics.

0.1.0

Nothing changed, used this as a test release to understand the publishing flow.

0.0.1

Initial release, somewhat functional but missing many things.

Files

CHANGELOG.old.md

Latest commit

History

CHANGELOG.old.md

File metadata and controls

0.99.1:

0.99.0:

0.98.0:

0.97.2:

0.97.1:

0.97.0:

0.96.2:

0.96.1:

0.96.0:

0.95.0:

0.94.0:

0.93.0:

0.92.1:

0.92.0:

0.91.0:

0.90.2:

0.90.1:

0.90.0:

0.89.0:

0.88.0:

0.87.0:

0.86.3

0.86.2

0.86.0, 0.86.1(just changelog-typo-fix):

0.85.1:

0.85.0:

0.84.1:

0.84.0:

0.83.0:

0.82.3:

0.82.2:

0.82.1:

0.82.0:

0.81.0:

0.80.0:

0.79.1:

0.79.0:

0.78.0: Happy New Year 2017!

0.77.0

0.76.0

0.75.0

0.74.0

0.73.2:

0.73.1:

0.73.0:

0.72.0:

0.71.0:

0.70.0:

0.69.0:

0.68.0:

0.67.0:

0.66.1:

0.66.0:

0.65.0:

0.64.0:

0.63.0:

0.62.0:

0.61.0:

0.60.1:

0.60.0:

0.59.0:

0.58.5:

0.58.4:

0.58.3:

0.58.2:

0.58.1:

0.58.0:

0.57.0:

0.56.0:

0.55.0:

0.54.1:

0.54.0:

0.53.0:

0.52.0: