hanobo

Home Assistant implementation of pynobo as a climate component

As for now you can see and change Operation and Preset for Zones and set eco/comfort temperatures if you have a supported thermostat.

The possible Operation modes are as following:

Auto - In this mode the Zone is in the Normal setting and Preset shows which state the Zone is in right now (according to calendar setup)
Heat - In this mode the Zone in in the Override setting and in the state selected by Preset (Away, Eco, Comfort)

This can be utilized the following ways:

Changing Preset to [Away, Eco, Comfort] will automatically change Operation to Heat
Changing Preset to None will automatically change Operation to Auto and update Preset
Changing Operation to Auto will automatically update Preset
Changing Operation to Heat will set Preset to Comfort

To get started with this superexperimental implementation:

Clone or download the project to [HA config path]/custom_components/nobo_hub:

Add the following to your Home Assistant configuration file:

# Nobø Energy Control
climate: 
  - platform: nobo_hub
    host: [your nobø serial] # You can use the 3 last digits if using discovery
#    ip_address: [your nobø ip] # Uncomment if you do not want discovery

Restart Home Assistant, you will get this warning:

WARNING (MainThread) [homeassistant.loader] You are using a custom component for nobo_hub.climate which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you do experience issues with Home Assistant.

Play around and figure out what does not work..

If you want some more logging info, add this to your Home Assistant configuration file:

# Extra logging
logger:
  default: warning
  logs:
    custom_components.nobo_hub.climate: debug