Sd problem?

[federicolucca]

I follow the guide in the wiki,this is the last-grive-sync.txt file.No SD was inserted

Fri May 31 23:43:14 CEST 2013
/usr/local/grive-sync/sync.sh: connecting...
ping: bad address 'www.google.com'
ping: bad address 'www.google.com'
ping: bad address 'www.google.com'
PING www.google.com (74.125.232.148): 56 data bytes
64 bytes from 74.125.232.148: seq=0 ttl=54 time=59.174 ms

--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 59.174/59.174/59.174 ms
/usr/local/grive-sync/sync.sh: connected
/usr/local/grive-sync/virtual_sd.sh: /mnt/sd is already mounted. Nothing done.
/usr/local/grive-sync/sync.sh: Starting grive
/mnt/onboard/.grive-sync/sd
Please run grive with the "-a" option if this is the first time you're accessing your Google Drive!
/usr/local/grive-sync/sync.sh: Synchronization error. Creating README.txt
exception: /home/matti/kobo/tmp/grive/libgrive/src/protocol/Json.cc(165): Throw in function gr::Json gr::Json::operator[](const std::string&) const
Dynamic exception type: boost::exception_detail::clone_implgr::Json::Error
std::exception::what: std::exception
[gr::expt::MsgTag_] = key: access_token is not found in object
[gr::JsonTag_] = { "error": "invalid_grant" }

[spMatti]

the last-grive-sync.txt contains line "Please run grive with the "-a" option if this is the first time you're accessing your Google Drive!". That message comes from grive and it means that grive is not yet initialized. You must first give grive permissions to access your google drive.

Can you redo section "Setup grive" from the installation instructions (https://github.com/softapalvelin/kobo-grive-sync/wiki/install#setup-grive) and test if it starts working?