Skip to content

Latest commit

 

History

History
128 lines (93 loc) · 5.39 KB

README.md

File metadata and controls

128 lines (93 loc) · 5.39 KB
Raw

Official toolchain for ScyllaDB

While we aim to build out-of-the-box on recent distributions, this isn't always possible and not everyone runs a recent distribution. For this reason a version-controlled toolchain is provided as a docker image.

Quick start

If your workstation supports docker (without requiring sudo), you can build and run Scylla easily without setting up the build dependencies beforehand:

./tools/toolchain/dbuild ./configure.py
./tools/toolchain/dbuild ninja build/release/scylla
./tools/toolchain/dbuild ./build/release/scylla --developer-mode 1

The dbuild script

The script dbuild allows you to run any in that toolchain with the working directory mounted:

./tools/toolchain/dbuild ./configure.py
./tools/toolchain/dbuild ninja

You can adjust the docker run command by adding more flags before the command to be executed, separating the flags and the command with --. This can be useful to attach more volumes (for data or ccache) and to set environment variables. For example, to use ccache:

./tools/toolchain/dbuild -e PATH=/usr/lib64/ccache:/usr/bin:/usr/local/bin -v $HOME/.ccache:$HOME/.ccache:z -- ninja

The above command works as follows:

  1. Ccache comes pre-installed in the container, and the setting of PATH to put it first causes the ccache wrappers to be used for compilation.
  2. The "-v" option mounts the user's regular ccache cache directory into the container, so the same directory can be reused.
  3. The ":z" flag is necessary on systems with SELinux enabled, and causes a special selinux label to be applied to $HOME/.ccache so docker can write it it. While this (rightfully) sounds fishy, note that dbuild already does the same thing to your current directory, where the build output is written - the current directory is also mounted with the ":z" flag.

To pass the same options to every run of dbuild, put them in the file ~/.config/scylladb/dbuild, which should contain a bash array assignment:

SCYLLADB_DBUILD=(-e PATH=/usr/lib64/ccache:/usr/bin:/usr/local/bin -v $HOME/.ccache:$HOME/.ccache:z)

The script also works from other directories, so if you have scylla-ccm checked out alongside scylla, you can write

../scylla/tools/toolchain/dbuild ./ccm ...

You will have access to both scylla and scylla-ccm in the container.

Interactive mode is also supported: running dbuild with no arguments will drop you into a shell, with all of the toolchain accessible.

Obtaining the current toolchain

The toolchain is stored in a file called tools/toolchain/image. Normally, dbuild will fetch the toolchain automatically. If you want to access the toolchain explicitly, pull that image:

docker pull $(<tools/toolchain/image)

Building the toolchain

If you add dependencies (to install-dependencies.sh or seastar/install-dependencies.sh) you should update the toolchain.

Run the command

podman build --no-cache --pull -f tools/toolchain/Dockerfile .

and use the resulting image.

Publishing an image

If you're a maintainer, you can tag the image and push it using podman push. Tags follow the format scylladb/scylla-toolchain:fedora-29-[branch-3.0-]20181128.

For master toolchains, the branch designation is omitted. In a branch, if there is a need to update a toolchain, the branch designation is added to the tag to avoid ambiguity.

Publishing an image is complicated since multiple architectures are supported.

You will need credentials to push images. You either need to setup permanent credentials with podman login, or you can just append [email protected] to the podman manifest push command and then type in your password.

Publishing procedure

  1. Pick a new name for the image (in tools/toolchain/image) and commit it. The commit updating install-dependencies.sh should include the toolchain change, for atomicity. Do not push the commit to next yet.
  2. Run tools/toolchain/prepare --clang-build-mode INSTALL and wait. It requires buildah and reg to be installed (and will complain if they are not).
  3. Push the commit to a personal repository/branch.
  4. Perform the following on an x86 and an ARM machine:
    1. check out the branch containing the new toolchain name
    2. Run git submodule update --init --recursive to make sure all the submodules are synchronized
    3. Run podman build --no-cache --pull --tag mytag-arch -f tools/toolchain/Dockerfile ., where mytag-arch is a new, unique tag that is different for x86 and ARM.
    4. Push the resulting images to a personal docker repository.
  5. Now, create a multiarch image with the following:
    1. Pull the two images with podman pull. Let's call the two tags mytag-x86 and mytag-arm.
    2. Create the new toolchain manifest with podman manifest create $(<tools/toolchain/image)
    3. Add each image with podman manifest add --all $(<tools/toolchain/image) mytag-x86 and podman manifest add --all $(<tools/toolchain/image) mytag-arm
    4. Push the image with podman manifest push --all $(<tools/toolchain/image) docker://$(<tools/toolchain/image)
  6. Now push the commit that updated the toolchain with git push.

Troubleshooting

When running sudo inside the container fails like this:

$ tools/toolchain/dbuild /bin/bash
bash-4.4$ sudo dnf install gdb
sudo: unknown uid 1000: who are you?

You can work it around by disabling SELinux on the host before running dbuild:

$ sudo setenforce 0