New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add prototyping space #9

Open

samuk opened this issue Jan 12, 2022 · 1 comment

Assignees

Contributor

samuk commented Jan 12, 2022 •

edited

Loading

If we re-rerouted the trace from pin 15 we could provide some onboard prototyping space, similar to Feather

The area between pin 14 and pin 16 down to the 'bottom' 5v could be perforated.
All the pins in that bottom section 'below' 14-16 pins could have solderable pads put next to them for connecting to those pins
We could break out & silkscreen 3v, 5v & Gnd & I2C pins somewhere around the edge of the 'proto' section, if not already conveniently exposed by 2)

runger1101001 commented Jan 12, 2022

I like this idea. The manufacturing cost is 0$, but the benefit to the user is large :-)

samuk assigned sathya131295 and ShouravSarkar and unassigned sathya131295

samuk mentioned this issue

SMD > through-hole resistors & Create BOM for Open core #2

Closed

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment