Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[ISSUE]: OPL Menu Not Working #1453

Open
2 tasks done
LexyGlitter opened this issue Jan 11, 2025 · 17 comments
Open
2 tasks done

[ISSUE]: OPL Menu Not Working #1453

LexyGlitter opened this issue Jan 11, 2025 · 17 comments
Labels

Comments

@LexyGlitter
Copy link

Checks

Describe the issue

I updated to the latest versions of OPL to fix the MX4SIO problem but now I have encountered an error that occurs after playing a game and i reset the console OPL Menu stops recognizing inputs from my controller for some reason, the only workaround i have found is to delete the config file to get it working again, i have tried with two different controllers and both ports but nothing works. And yes both of my controllers are official controllers and not third party.
Note: i have tried downgrading but that just makes MX4SIO stop working.

Console model

SCPH-70001

OPL version / revision

OPL Beta 1.2.0

In which device(s) have you experienced this issue?

No response

Context and extra information

No response

@ButtonBasher92
Copy link

Same issue. OPL wouldn't launch until I deleted the config files. but then am unable to navigate menus in OPL. brook wingman blinking and disconected, no input from controller or from PS2 DVD remote.

@Wink72
Copy link

Wink72 commented Jan 12, 2025

These issues are the same when using these latest builds on PS3 as well. Even when deleting config from memory card it gets stuck on spinning circle and no response from ps3 controller.

@CosmicScale
Copy link
Contributor

Same issue. OPL launches. Controller unresponsive.

@thesunnymachine
Copy link

Same.

@dellmas
Copy link

dellmas commented Jan 14, 2025

That's what I get. Run it, loads. displays menu, can't do anything.

@LandiniBobini
Copy link

Also having this problem. :(

@VHSMAC
Copy link

VHSMAC commented Jan 15, 2025

I'm experiencing this same issue as well. SCPH-50001, OEM controllers. I'm not sure if this is accurate to anyone else, but the inputs would cut out whenever I apply or save settings.

@jusefn
Copy link

jusefn commented Jan 16, 2025

Also affected, either a black screen appears if no config on the mc exists or OPL starts up with no input being detected (8bitdo PS1/PS2 receiver, SCPH-50004)

@AskaLangly
Copy link

AskaLangly commented Jan 17, 2025

Moved current config, starting fresh. Settings menu is unresponsive.
30001, FHDB install.

EDIT: Use beta 2194.

@mystyq
Copy link

mystyq commented Jan 20, 2025

Think this might be related to changes in the SDK?

@10522
Copy link

10522 commented Jan 20, 2025

OPL Beta 1.2.0 2197 (run_2058) - controller works well
OPL Beta 1.2.0 2197 (run_2059) - controller doesn't work
OPL Beta 1.2.0 2199 (run_2070) - controller doesn't work

@AKuHAK @rickgaiser @israpps @uyjulian @fjtrujy @Wolf3s @HowlingWolfHWC @CosmicScale @J013k @Jaajees

@Wolf3s
Copy link
Contributor

Wolf3s commented Jan 20, 2025

OPL Beta 1.2.0 2197 (run_2058) - controller works well
OPL Beta 1.2.0 2197 (run_2059) - controller doesn't work
OPL Beta 1.2.0 2199 (run_2070) - controller doesn't work

@AKuHAK @rickgaiser @israpps @uyjulian @fjtrujy @Wolf3s @HowlingWolfHWC @CosmicScale @J013k @Jaajees

Another PS2SDK problem!!!

@mystyq
Copy link

mystyq commented Jan 20, 2025

Can anyone confirm if this is fixed for them? I am able to use inputs to the menu with the most recent CI build

@Wolf3s
Copy link
Contributor

Wolf3s commented Jan 20, 2025

@Jaajees
Copy link

Jaajees commented Jan 21, 2025

OPL Beta 1.2.0 2197 (run_2058) - controller works well
OPL Beta 1.2.0 2197 (run_2059) - controller doesn't work
OPL Beta 1.2.0 2199 (run_2070) - controller doesn't work
@AKuHAK @rickgaiser @israpps @uyjulian @fjtrujy @Wolf3s @HowlingWolfHWC @CosmicScale @J013k @Jaajees

Another PS2SDK problem!!!

Run number 2070: OPL crashes when setting "Applications Start Mode" to "Auto"

Run número 2071: Works well

@iGom
Copy link

iGom commented Jan 21, 2025

Can anyone confirm if this is fixed for them? I am able to use inputs to the menu with the most recent CI build

the new compilation build run_2071 of 2199 works well

@jusefn
Copy link

jusefn commented Jan 21, 2025

Can anyone confirm if this is fixed for them? I am able to use inputs to the menu with the most recent CI build

Latest nightly works for me now

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests