Skip to content

Latest commit

 

History

History
44 lines (32 loc) · 1.17 KB

README.md

File metadata and controls

44 lines (32 loc) · 1.17 KB
Raw

BBpystepper

bbpystepper is a Python module for controlling stepper motors with the BeagleBone Black. The code by default uses full-stepping.

Dependencies

  • Adafruit_BBIO

Installation

  • Log in via SSH and then git clone https://github.com/petebachant/BBpystepper.git
  • cd BBpystepper
  • python setup.py install

Usage example

>>> from bbpystepper import Stepper
>>> mystepper = Stepper()
>>> mystepper.rotate(180, 10) # Rotates motor 180 degrees at 10 RPM
>>> mystepper.rotate(-180, 5) # Rotates motor back 180 degrees at 5 RPM
>>> mystepper.angle
0.0

Notes

  • By default the GPIO pins used are P8_13, P8_14, P8_15, and P8_16. These can be changed by modifying the Stepper.pins list.

  • By default the Stepper.steps_per_rev parameter is set to 2048 to match my motor (it has a built-in gearbox).

  • The code doesn't keep track of where it ends in the sequence of pins. It simply sets all pins low after a move. This means there could be some additional error in the Stepper.angle variable if the amount of steps moved is not divisible by 4.