v3.1.2

[osy]

Changes (v3.1.0)

• macOS Monterey support
• Fix warning message on OC boot (config: fix show osc about KeyMergeThreshold when boot #585)
• SATA workaround is optional since it may break NVMe in some circumstances (installer: make SATA workaround optional #604)

Changes (v3.1.1)

• Add Bluetooth support for Broadcom/Intel chips in Monterey (Installer: Add bluetooth support for Broadcom/Intel chips in Monterey #923)

Changes (v3.1.2)

• Fixed error during install of macOS 12.0 beta 8
• Fixed OTA updates of macOS 12.0 beta 6 and up
• Fixed Secure Boot

Driver Updates (v3.1.0)

• AirportBrcmFixup 2.1.2 -> 2.1.3
• AppleALC 1.6.0 -> 1.6.4
• BrcmPatchRAM 2.5.8 -> 2.6.0
• IntelBluetoothFirmware 1.1.2 -> 2.0.0
• IntelMausi 1.0.6 -> 1.0.7
• Lilu 1.5.3 -> 1.5.6
• NVMeFix 1.0.7 -> 1.0.9
• OpenCore 0.6.9 -> 0.7.3
• OpenIntelWireless 1.3.0 -> 2.0.0
• Polaris22Fixup 1.3.3 -> 1.3.4
• VirtualSMC 1.2.3 -> 1.2.7
• WhateverGreen 1.4.9 -> 1.5.3

Driver Update (v3.1.2)

• AppleALC 1.6.4 -> AppleALC 1.6.5
• IntelBluetoothFirmware 2.0.0 -> 2.0.1
• OpenCore 0.7.3 -> 0.7.4
• WhateverGreen 1.5.3 -> WhateverGreen 1.5.4

Messages

• If you are upgrading from v2.17 and below, please read the notes at the top of v3.0.1
• As announced a few months ago, this project will be transitioning to a long-term support model (a few stability updates per year). Following Apple's own deprecation model, we expect the EOL of this project to be no earlier than 2023.

---

This discussion was created from the release v3.1.2.

[wangfuco]

I upgraded to 3.1.2 from 3.0.1, and after the reboot, my main nvme drive disappeared from the opencore boot options. The system is 10.15.7.

[x2358473]

I have the same problem.
Finally, boot with the old USB boot。

[Needham73]

Hi

After installing 3.1.2 Lilu started to crash during boot and now is on a reboot loop

[Needham73]

The Bluetooth problem has on the Beta 10 too.

I jumped from Beta 8 to final release and it was working on beta 8. I tried the version 3.1.2 again but without bluetooth driver and it works (without bluetooth of course) so there must be something related to bluetooth

[Needham73]

The Bluetooth problem has on the Beta 10 too.

I jumped from Beta 8 to final release and it was working on beta 8. I tried the version 3.1.2 again but without bluetooth driver and it works (without bluetooth of course) so there must be something related to bluetooth

Solved it by updating BlueToolFixup.kext to 2.6.1 and placing it las in the kernel section of config.plist

[mokapsing]

The Bluetooth problem has on the Beta 10 too.

I jumped from Beta 8 to final release and it was working on beta 8. I tried the version 3.1.2 again but without bluetooth driver and it works (without bluetooth of course) so there must be something related to bluetooth

Solved it by updating BlueToolFixup.kext to 2.6.1 and placing it las in the kernel section of config.plist

Can you turn on Bluetooth after you turn it off?

[Needham73]

The Bluetooth problem has on the Beta 10 too.

I jumped from Beta 8 to final release and it was working on beta 8. I tried the version 3.1.2 again but without bluetooth driver and it works (without bluetooth of course) so there must be something related to bluetooth

Solved it by updating BlueToolFixup.kext to 2.6.1 and placing it las in the kernel section of config.plist

Can you turn on Bluetooth after you turn it off?

If I manually turn it off I have to reboot to get it back on, other than that it's been working ok.

[mokapsing]

The Bluetooth problem has on the Beta 10 too.

I jumped from Beta 8 to final release and it was working on beta 8. I tried the version 3.1.2 again but without bluetooth driver and it works (without bluetooth of course) so there must be something related to bluetooth

Solved it by updating BlueToolFixup.kext to 2.6.1 and placing it las in the kernel section of config.plist

Can you turn on Bluetooth after you turn it off?

If I manually turn it off I have to reboot to get it back on, other than that it's been working ok.

now you can try the latest beta build of BlueToolFixup.kext, it can fix this issue.

[x2358473]

@osy I'm sorry to bother you. The latest 3.1.2 does not display startup options on 10.15 systems. Could you please take a look at the problem? I like the 10.15 system very much and hope to use it for a long time. If I'm bothering you. Please ignore it.