Taskfile.yml

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
version: '3'

vars:
  G: ""
  N: ""
  T: ""
  P: ""
  BASETAG: 3.1.0-mastrogpt
  KUBE:
    sh: ./detect.sh
  NS: "nuvolaris"
  PREFIX: ""

dotenv:
  - .env

includes:
  d:
    taskfile: TaskfileDev.yml
  t: 
    taskfile: TaskfileTest.yml
  b: 
    taskfile: TaskfileBuild.yml
  o:
    taskfile: TaskfileOlaris.yml
  kind:
    taskfile: clusters/kind.yml
    dir: clusters
  eks:
    taskfile: clusters/eks.yml
    dir: clusters
  aks:
    taskfile: clusters/aks.yml
    dir: clusters
  lks:  
    taskfile: clusters/lks.yml
    dir: clusters
  gke:
    taskfile: clusters/gke.yml
    dir: clusters
  mik:
    taskfile: clusters/microk8s.yml
    dir: clusters
  k3s:
    taskfile: clusters/k3s.yml
    dir: clusters
  osh:
    taskfile: clusters/openshift.yml
    dir: clusters
  sys:
    taskfile: actions/system.yml
    dir: actions
  talos:
    taskfile: clusters/talos-gcp.yml
    dir: clusters    

tasks:

  default: 
    - task: use

  setup:
    deps:
      - update-files-from-openwhisk
      - ssh-key
      - configure-env
    cmds:
      - mkdir -p ~/.kube ; touch ~/.kube/config
      - poetry install
    status:
      - test -e $GOBIN/kopf
      
  env: env
  
  watch: watch kubectl -n {{.NS}} get nodes,pod,svc,pvc,ingress
  watch-osh: watch kubectl -n {{.NS}} get nodes,pod,svc,pvc,route
  watch-cert: watch kubectl -n {{.NS}} get ingress,ClusterIssuers,Certificates,CertificateRequests,Orders,Challenges 
  watch-pod: watch kubectl -n {{.NS}} get po,job --no-headers

  logs: >
    rm -f nuvolaris-operator.log ;
    kubectl -n nuvolaris logs pod/nuvolaris-operator -f | tee nuvolaris-operator.log

  cli: 
    - task: d:cli

  run:
    - task: sys:prepare
    - task: t:permission
    - task: d:run
  
  irun:
  - task: instance
  - task: d:run

  permission:
    - task: t:permission

  operator:
    - task: t:operator

  instance:
    - task: t:instance

  instance-wfx:
    - task: d:instance-wfx

  instance-and-log:
    - task: d:instance
    - kubectl -n nuvolaris logs pod/nuvolaris-operator -f

  mongo: 
    - task: t:mongo 

  minio: 
    - task: t:minio

  postgres:
    - task: t:postgres      

  minimal:
    #- task: permission
    - task: operator
    - task  instance WHISK=minimal
    - task: config
    - task: hello

  all:
    - task: permission
    - task: operator
    - task: instance
    - task: config
    - task: hello
    - task: redis
    - task: mongo
    - task: minio
    - task: postgres

  config:
    - task: t:config

  hello: 
    - task: t:hello

  redis: 
    - task: t:redis

  workflow: 
    - kubectl -n nuvolaris apply -f tests/workflow-test.yaml

  defin:
    - task: d:defin

  image-tag:
    - git tag -d $(git tag) 
    - git tag -f {{.P}}{{.BASETAG}}.$(date +%y%m%d%H%M)
    - env PAGER= git tag

  # configure env
  configure-env:
    cmds:
      - |
        if ! test -e .env
        then echo "please copy .env.dist in .env and add the keys"
        fi

  # update configuration files from openwhisk source
  update-files-from-openwhisk: 
    cmds:
      - | 
        cp -v ../nuvolaris-controller/openwhisk/ansible/files/*.json nuvolaris/files
        cp -v ../nuvolaris-controller/openwhisk/bin/wskadmin tools/cli/wsk/wskadmin.py
        cp -v ../nuvolaris-controller/openwhisk/tools/admin/*.py tools/cli/wsk
    sources:
      - ../nuvolaris-controller/openwhisk/ansible/files/*.json
      - ../nuvolaris-controller/openwhisk/bin/wskadmin
      - ../nuvolaris-controller/openwhisk/tools/admin/*.py
    generates:
      - nuvolaris/files/*.json
      - nuvolaris/tools/cli/wsk/*.py

  # generate ssh keys
  ssh-key:
    cmds:
      - test -f clusters/id_rsa || ssh-keygen -b 2048 -t rsa -f clusters/id_rsa -q -N ""
      - ssh-keygen  -y -f clusters/id_rsa >clusters/id_rsa.pub

  clean:
    cmds:
      - cmd: kubectl -n nuvolaris delete wsku --all
        ignore_error: true    
      - cmd: kubectl -n nuvolaris delete wsk/controller --grace-period=0 --timeout=5s
        ignore_error: true
      - cmd: task defin
        ignore_error: true
      - cmd: kubectl -n nuvolaris delete all --all --grace-period=0
        ignore_error: true
      - cmd: kubectl -n nuvolaris delete pvc --all --grace-period=0
        ignore_error: true
      - cmd: kubectl -n nuvolaris delete ing --all --grace-period=0
        ignore_error: true
      - cmd: kubectl -n nuvolaris delete kubegres --all
        ignore_error: true
      - cmd: kubectl -n nuvolaris delete cm/config --grace-period=0
        ignore_error: true
      - cmd: kubectl delete clusterissuers/letsencrypt-issuer
        ignore_error: true              

  utest:
    cmds:
      - |
        for test in nuvolaris/{{.T}}*.py
        do  echo "*** [{{.KUBE}}] $test"
            poetry run python3 -m doctest $test {{.CLI_ARGS}}
        done
    silent: true

  iclean: rm -f deploy/*/kustomization.yaml deploy/*/__* deploy/*/*_generated.yaml

  itest: 
    cmds:
      - task: iclean
      - |
        kubectl apply -f deploy/nuvolaris-permissions
        rm -f _failed.txt
        for test in tests/{{.T}}*.ipy tests/{{.KUBE}}/{{.T}}*.ipy
        do  
            if test -e "$test"
            then  echo "*** [{{.KUBE}}] $test"
                  rm -f deploy/*/kustomization.yaml deploy/*/__*
                  if poetry run ipython $test {{.CLI_ARGS}}
                  then  echo "OK: $test"
                  else  echo "FAIL: $test"
                        echo $test >>_failed.txt
                  fi
            fi
        done
        if test -e _failed.txt
        then  echo "*** FAILED TESTS:"
              cat _failed.txt
        fi
    silent: true

  dtest:
    cmds:
      - task: permission
      - task: operator
      - task: instance
      - task: actions

  actions:
    - task: t:config
    - task: t:hello
    - task: t:redis
    - task: t:echo
    - task: t:api

  test:
    - task: clean
    - task: utest
    - task: itest
    - task: dtest

  debug: 
    - poetry run ipython profile create
    - cp test_profile.ipy ~/.ipython/profile_default/startup/
    - task: uitest

  all-kubes: 
    cmds: 
      - |-
        if test -z "{{.CLI_ARGS}}"
        then echo 'use "task all-kubes -- <target> runs the target against all the available kubes'
        else  for cfg in clusters/*.kubeconfig
              do  /usr/games/cowsay -f duck  $(basename $cfg .kubeconfig) 2>/dev/null
                  cp -v $cfg ~/.kube/config >/dev/null
                  task {{.CLI_ARGS}}
              done
        fi
    silent: true

  kube-test: 
    cmds:
      - task dtest 2>/dev/null >/dev/null

  use: 
    cmds:
    - |-
        if test -z "{{.N}}"
        then  echo "*** current: {{.KUBE}}"
              ls clusters/*.kubeconfig | sort | awk '{ print NR, $0 }'
              echo "*** select with 'task #'"
        else  CFG="$(ls -1 clusters/*.kubeconfig | tail +{{.N}} | head -1)" 
              cp $CFG ~/.kube/config
              echo "cluster: $(./detect.sh)"
              kubectl get nodes
        fi
    silent: true

  build-and-load:
    - task: b:build-and-load

  build-and-push:
    - task: b:build-and-push

  buildx-and-push:
    - task: b:buildx-and-push

  docker-login:
    - task: b:docker-login

  shell:
    - kubectl -n nuvolaris exec --stdin --tty {{.POD}} -- /bin/bash     

  1: task use N=1
  2: task use N=2
  3: task use N=3
  4: task use N=4
  5: task use N=5
  6: task use N=6
  7: task use N=7
  8: task use N=8
  9: task use N=9