v0.5.4

• NTRIP client filter out GNGGA/GPGGA and send every 15 seconds

To install this update please follow the firmware update guide.

v0.5.3

• Hotspot forwarding (IP forwarding/NATP)
• Update ESP-IDF

To install this update please follow the firmware update guide.

v0.5.2

• Don't send HTTP/1.1 at end of NTRIP v1 SOURCE request to support old casters
• Fix incorrectly set connection state after NTRIP server disconnect 8960a0c
• Indicate pre release version availability beside current version
• Update ESP-IDF

To install this update please follow the firmware update guide.

v0.5.1

• Fix NTRIP client crash
• Correctly detect (un)successful client connections to NTRIP v1 casters to prevent spam connection attempts
• Allow up to 16 active sockets
• Minor bug fixes

To install this update please follow the firmware update guide.

v0.5

• NTRIP server connect only when data is being received from UART
• WiFi 20MHz bandwidth (both hotspot and station) for improved connection quality
• WiFi fast scan or all channel scan option
• WiFi reconnect maximum delay set to 1 minute
• Fix socket connection failure detection
• Set 10 second read/write timeout on all clients (NTRIP server/client and socket client)
• Caching of web server resources
• Fix web server error from connection being closed twice
• Increase core dump partition size
• Only allow single log page open at the same time
• Log line index on log page
• Special lines for device restarted on log page
• Print logs to UART in ANSI color
• Minimize unnecessary logging

v0.4.4

• Static IP configuration for WiFi (hotspot and station mode)
• Data usage and transfer rate shown for every stream (UART, NTRIP, socket, etc)
• Minor fixes

v0.4.3

• Delay WiFi initialization to decrease initial power consumption spike
• Panic recovery boot process (fast flashing red LED) before WiFi initialization to allow for config reset
• Corrected bug in TCP/UDP server where only 4 bytes were being read per packet
• Updated ESP-IDF
• Added footer to configuration page with device uptime and available heap space
• Improved version info printing at boot

v0.4.2

• Web server auth modes (user/password or hotspot devices only)
• Check for new releases on GitHub

v0.4.1

• Decrease RAM usage to improve stability

v0.4

• Store crash core dumps in flash for download at /core_dump (ELF file included for debugging)
• Automatic restart when applying new config
• Include reset reason in INIT log (software, poweron, watchdog error, etc)
• NTRIP caster and socket server work on hotspot