build.tcl

if {$argc == 0} {
    puts "Usage: $argv0 <device> [<controller>]"
    puts "          device: nano20k, primer25k, mega60k, mega138k, console60k"
    puts "      controller: snes, ds2"
    puts "Note: nano20k supports both controllers simultaneously, so build with just: gw_sh build.tcl nano20k"
    exit 1
}

set dev [lindex $argv 0]
if {$argc == 2} {
    set controller [lindex $argv 1]
} else {
    set controller ""
}

# process $dev and $controller
if {$dev eq "nano20k"} {
    set_device GW2AR-LV18QN88C8/I7 -device_version C
    add_file src/nano20k/config.v
    add_file -type verilog "src/snes2hdmi_nano.v"
    add_file -type cst "src/nano20k/snestang.cst"
    add_file -type verilog "src/nano20k/gowin_pll_hdmi.v"
    add_file -type verilog "src/nano20k/gowin_pll_snes.v"
    add_file -type verilog "src/nano20k/sdram_nano.v"
    # nano20k supports both controllers simultaneously
    set_option -output_base_name snestang_${dev}
} elseif {$dev eq "primer25k"} {
    set_device GW5A-LV25MG121NC1/I0 -device_version A
    if {$controller eq "snes"} {
        add_file src/primer25k/config_snescontroller.v
        add_file -type cst "src/primer25k/snestang_snescontroller.cst"
    } elseif {$controller eq "ds2"} {
        add_file src/primer25k/config.v
        add_file -type cst "src/primer25k/snestang.cst"
    } else {
        error "Unknown controller $controller"
    }
    add_file -type verilog "src/snes2hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_27.v"
    add_file -type verilog "src/primer25k/gowin_pll_hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_snes.v"
    add_file -type verilog "src/primer25k/sdram_cl2_3ch.v"
    set_option -output_base_name snestang_${dev}_${controller}
} elseif {$dev eq "mega60k"} {
    set_device GW5AT-LV60PG484AC1/I0 -device_version B
    if {$controller eq "snes"} {
        add_file src/mega60k/config_snescontroller.v
        add_file -type cst "src/mega60k/snestang_snescontroller.cst"
    } elseif {$controller eq "ds2"} {
        add_file src/mega60k/config.v
        add_file -type cst "src/mega60k/snestang.cst"
    } else {
        error "Unknown controller $controller"
    }
    add_file -type verilog "src/snes2hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_27.v"
    add_file -type verilog "src/primer25k/gowin_pll_hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_snes.v"
    add_file -type verilog "src/primer25k/sdram_cl2_3ch.v"
    set_option -output_base_name snestang_${dev}_${controller}
} elseif {$dev eq "mega138k"} {
    set_device GW5AST-LV138FPG676AES -device_version B
    if {$controller eq "snes"} {
        add_file src/mega138k/config_snescontroller.v
        add_file -type cst "src/mega138k/snestang_snescontroller.cst"
    } elseif {$controller eq "ds2"} {
        add_file src/mega138k/config.v
        add_file -type cst "src/mega138k/snestang.cst"
    } else {
        error "Unknown controller $controller"
    }
    add_file -type verilog "src/snes2hdmi.v"
    add_file -type verilog "src/mega138k/gowin_pll_27.v"
    add_file -type verilog "src/mega138k/gowin_pll_hdmi.v"
    add_file -type verilog "src/mega138k/gowin_pll_snes.v"
    add_file -type verilog "src/mega138k/sdram_cl2_2ch.v"
    add_file -type verilog "src/mega138k/vram.v"
    add_file -type verilog "src/mega138k/vram_spb.v"
    set_option -output_base_name snestang_${dev}_${controller}
} elseif {$dev eq "console60k"} {
    set_device GW5AT-LV60PG484AC1/I0 -device_version B
    if {$controller eq "snes"} {
        add_file src/console60k/config_snescontroller.v
        add_file -type cst "src/console60k/snestang_snescontroller.cst"
    } elseif {$controller eq "ds2"} {
        add_file src/console60k/config.v
        add_file -type cst "src/console60k/snestang.cst"
    } else {
        error "Unknown controller $controller"
    }
    add_file -type verilog "src/snes2hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_27.v"
    add_file -type verilog "src/primer25k/gowin_pll_hdmi.v"
    add_file -type verilog "src/primer25k/gowin_pll_snes.v"
    add_file -type verilog "src/primer25k/sdram_cl2_3ch.v"
    set_option -output_base_name snestang_${dev}_${controller}
} else {
    error "Unknown device $dev"
}

add_file -type verilog "src/65C816/ALU.v"
add_file -type verilog "src/65C816/AddSubBCD.v"
add_file -type verilog "src/65C816/AddrGen.v"
add_file -type verilog "src/65C816/BCDAdder.v"
add_file -type verilog "src/65C816/P65C816.v"
add_file -type verilog "src/65C816/adder4.v"
add_file -type verilog "src/65C816/bit_adder.v"
add_file -type verilog "src/65C816/common.sv"
add_file -type verilog "src/65C816/mcode.sv"
add_file -type verilog "src/CEGen.v"
add_file -type verilog "src/chip/DSP/DSP_LHRomMap.v"
add_file -type verilog "src/chip/DSP/DSPn.v"
add_file -type verilog "src/chip/DSP/OBC1.v"
add_file -type verilog "src/chip/DSP/SRTC.v"
add_file -type verilog "src/chip/dsp/dsp_data_ram.v"
add_file -type verilog "src/cpu.v"
add_file -type verilog "src/dsp.v"
add_file -type verilog "src/dual_clk_fifo.v"
add_file -type verilog "src/dualshock_controller.v"
add_file -type verilog "src/gowin_dpb_cgram.v"
add_file -type verilog "src/gowin_dpb_hoam.v"
add_file -type verilog "src/gowin_dpb_oam.v"
add_file -type verilog "src/hdmi2/audio_clock_regeneration_packet.sv"
add_file -type verilog "src/hdmi2/audio_info_frame.sv"
add_file -type verilog "src/hdmi2/audio_sample_packet.sv"
add_file -type verilog "src/hdmi2/auxiliary_video_information_info_frame.sv"
add_file -type verilog "src/hdmi2/hdmi.sv"
add_file -type verilog "src/hdmi2/packet_assembler.sv"
add_file -type verilog "src/hdmi2/packet_picker.sv"
add_file -type verilog "src/hdmi2/serializer.sv"
add_file -type verilog "src/hdmi2/source_product_description_info_frame.sv"
add_file -type verilog "src/hdmi2/tmds_channel.sv"
add_file -type verilog "src/iosys/gowin_dpb_menu.v"
add_file -type verilog "src/iosys/iosys.v"
add_file -type verilog "src/iosys/picorv32.v"
add_file -type verilog "src/iosys/simplespimaster.v"
add_file -type verilog "src/iosys/simpleuart.v"
add_file -type verilog "src/iosys/spi_master.v"
add_file -type verilog "src/iosys/spiflash.v"
add_file -type verilog "src/iosys/textdisp.v"
add_file -type verilog "src/main.v"
add_file -type verilog "src/ppu.v"
add_file -type verilog "src/ppucgram.v"
add_file -type verilog "src/ppuhoam.v"
add_file -type verilog "src/ppuoam.v"
add_file -type verilog "src/smc_parser.v"
add_file -type verilog "src/smp.v"
add_file -type verilog "src/snes.v"
add_file -type verilog "src/controller_adapter.sv"
add_file -type verilog "src/controller_ds2.sv"
add_file -type verilog "src/controller_snes.v"
add_file -type verilog "src/snestang_top.v"
add_file -type verilog "src/spc700/_spc700_package.v"
add_file -type verilog "src/spc700/addrgen.v"
add_file -type verilog "src/spc700/addsub.v"
add_file -type verilog "src/spc700/alu.v"
add_file -type verilog "src/spc700/bcdadj.v"
add_file -type verilog "src/spc700/mcode.v"
add_file -type verilog "src/spc700/muldiv.v"
add_file -type verilog "src/spc700/spc700.v"
add_file -type verilog "src/swram.v"
add_file -type verilog "src/uart_tx_V2.v"
add_file -type sdc "src/snestang.sdc"
add_file -type gao -disable "src/mega138k/snestang.gao"

set_option -synthesis_tool gowinsynthesis
set_option -top_module snestang_top
set_option -verilog_std sysv2017
set_option -rw_check_on_ram 1
set_option -place_option 2
set_option -use_mspi_as_gpio 1
set_option -use_sspi_as_gpio 1
set_option -use_ready_as_gpio 1
set_option -use_done_as_gpio 1
set_option -use_i2c_as_gpio 1
set_option -use_cpu_as_gpio 1
set_option -multi_boot 1

run all