Connecting the Dualshock 2 to the Tang Nano 20k

[otaviocmaciel]

Hello dear friends! I didn't find the wiring diagram to connect the Dualshock 2 to the Tang Nano 20k, maybe I didn't search correctly. I will describe it to make it easier for others (for those who don't have the adapter).

If you open GPRJ FPGA project you can see this (in the FloorPanel):

By this way, the wiring diagram to conect the DS2 to the Tang Nano 20k is:

<style> </style>

	TN20k (Controller 1)	TN20k (Controller 2)	DS2 (Color)
VCC	3V3	3V3	Red
GND	GND	GND	Black
CLK	17	52	Blue
CS	18	72	Yellow
MISO	19	71	Brown
MOSI	20	53	Orange

Ready! Everything should work.

[Chandler-Kluser]

I believe this kind of information is not well indicated in documentation, you can make a PR to add a markdown guide for newbies.

The thing that actually is the most close of your request is this wiring guide for the Tang Nano 9k version (with blueretro adapter)

[Chandler-Kluser]

I have done a 5-minute search and I have found this guide from this Official repository in the wiki page.

[otaviocmaciel]

Ok, but where is the cable color indication and where should it be connected? I don't have an adapter.

[Chandler-Kluser]

There is also a video on youtube with the color wiring, in the link I fixed the timestamp for you:
https://www.youtube.com/watch?v=UNcErsqld5s&t=506s
You can also check this picture:

[otaviocmaciel]

Ok! Thank you👍🏻