config.txt

# Uncrustify 0.61
#
# General options
#

newlines                                  { Auto, LF, CR, CRLF }
  The type of line endings

input_tab_size                            Number
  The original size of tabs in the input

output_tab_size                           Number
  The size of tabs in the output (only used if align_with_tabs=true)

string_escape_char                        Number
  The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)

string_escape_char2                       Number
  Alternate string escape char for Pawn. Only works right before the quote char.

string_replace_tab_chars                  { False, True }
  Replace tab characters found in string literals with the escape sequence \t instead.

tok_split_gte                             { False, True }
  Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
  If true (default), 'assert(x<0 && y>=3)' will be broken.
  Improvements to template detection may make this option obsolete.

disable_processing_cmt                    String
  Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.

enable_processing_cmt                     String
  Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.

utf8_bom                                  { Ignore, Add, Remove, Force }
  Control what to do with the UTF-8 BOM (recommend 'remove')

utf8_byte                                 { False, True }
  If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8

utf8_force                                { False, True }
  Force the output encoding to UTF-8

#
# Indenting
#

indent_columns                            Number
  The number of columns to indent per level.
  Usually 2, 3, 4, or 8.

indent_continue                           Number
  The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
  For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level

indent_with_tabs                          Number
  How to use tabs when indenting code
  0=spaces only
  1=indent with tabs to brace level, align with spaces
  2=indent and align with tabs, using spaces when not on a tabstop

indent_cmt_with_tabs                      { False, True }
  Comments that are not a brace level are indented with tabs on a tabstop.
  Requires indent_with_tabs=2. If false, will use spaces.

indent_align_string                       { False, True }
  Whether to indent strings broken by '\' so that they line up

indent_xml_string                         Number
  The number of spaces to indent multi-line XML strings.
  Requires indent_align_string=True

indent_brace                              Number
  Spaces to indent '{' from level

indent_braces                             { False, True }
  Whether braces are indented to the body level

indent_braces_no_func                     { False, True }
  Disabled indenting function braces if indent_braces is true

indent_braces_no_class                    { False, True }
  Disabled indenting class braces if indent_braces is true

indent_braces_no_struct                   { False, True }
  Disabled indenting struct braces if indent_braces is true

indent_brace_parent                       { False, True }
  Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.

indent_paren_open_brace                   { False, True }
  Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.

indent_namespace                          { False, True }
  Whether the 'namespace' body is indented

indent_namespace_single_indent            { False, True }
  Only indent one namespace and no sub-namespaces.
  Requires indent_namespace=true.

indent_namespace_level                    Number
  The number of spaces to indent a namespace block

indent_namespace_limit                    Number
  If the body of the namespace is longer than this number, it won't be indented.
  Requires indent_namespace=true. Default=0 (no limit)

indent_extern                             { False, True }
  Whether the 'extern "C"' body is indented

indent_class                              { False, True }
  Whether the 'class' body is indented

indent_class_colon                        { False, True }
  Whether to indent the stuff after a leading base class colon

indent_class_on_colon                     { False, True }
  Indent based on a class colon instead of the stuff after the colon.
  Requires indent_class_colon=true. Default=false

indent_constr_colon                       { False, True }
  Whether to indent the stuff after a leading class initializer colon

indent_ctor_init_leading                  Number
  Virtual indent from the ':' for member initializers. Default is 2

indent_ctor_init                          Number
  Additional indenting for constructor initializer list

indent_else_if                            { False, True }
  False=treat 'else\nif' as 'else if' for indenting purposes
  True=indent the 'if' one level
  

indent_var_def_blk                        Number
  Amount to indent variable declarations after a open brace. neg=relative, pos=absolute

indent_var_def_cont                       { False, True }
  Indent continued variable declarations instead of aligning.

indent_shift                              { False, True }
  Indent continued shift expressions ('<<' and '>>') instead of aligning.
  Turn align_left_shift off when enabling this.

indent_func_def_force_col1                { False, True }
  True:  force indentation of function definition to start in column 1
  False: use the default behavior

indent_func_call_param                    { False, True }
  True:  indent continued function call parameters one indent level
  False: align parameters under the open paren

indent_func_def_param                     { False, True }
  Same as indent_func_call_param, but for function defs

indent_func_proto_param                   { False, True }
  Same as indent_func_call_param, but for function protos

indent_func_class_param                   { False, True }
  Same as indent_func_call_param, but for class declarations

indent_func_ctor_var_param                { False, True }
  Same as indent_func_call_param, but for class variable constructors

indent_template_param                     { False, True }
  Same as indent_func_call_param, but for templates

indent_func_param_double                  { False, True }
  Double the indent for indent_func_xxx_param options

indent_func_const                         Number
  Indentation column for standalone 'const' function decl/proto qualifier

indent_func_throw                         Number
  Indentation column for standalone 'throw' function decl/proto qualifier

indent_member                             Number
  The number of spaces to indent a continued '->' or '.'
  Usually set to 0, 1, or indent_columns.

indent_sing_line_comments                 Number
  Spaces to indent single line ('//') comments on lines before code

indent_relative_single_line_comments      { False, True }
  If set, will indent trailing single line ('//') comments relative
  to the code instead of trying to keep the same absolute column

indent_switch_case                        Number
  Spaces to indent 'case' from 'switch'
  Usually 0 or indent_columns.

indent_case_shift                         Number
  Spaces to shift the 'case' line, without affecting any other lines
  Usually 0.

indent_case_brace                         Number
  Spaces to indent '{' from 'case'.
  By default, the brace will appear under the 'c' in case.
  Usually set to 0 or indent_columns.

indent_col1_comment                       { False, True }
  Whether to indent comments found in first column

indent_label                              Number
  How to indent goto labels
   >0 : absolute column where 1 is the leftmost column
   <=0 : subtract from brace indent

indent_access_spec                        Number
  Same as indent_label, but for access specifiers that are followed by a colon

indent_access_spec_body                   { False, True }
  Indent the code after an access specifier by one level.
  If set, this option forces 'indent_access_spec=0'

indent_paren_nl                           { False, True }
  If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)

indent_paren_close                        Number
  Controls the indent of a close paren after a newline.
  0: Indent to body level
  1: Align under the open paren
  2: Indent to the brace level

indent_comma_paren                        { False, True }
  Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren

indent_bool_paren                         { False, True }
  Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren

indent_first_bool_expr                    { False, True }
  If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones

indent_square_nl                          { False, True }
  If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)

indent_preserve_sql                       { False, True }
  Don't change the relative indent of ESQL/C 'EXEC SQL' bodies

indent_align_assign                       { False, True }
  Align continued statements at the '='. Default=True
  If FALSE or the '=' is followed by a newline, the next line is indent one tab.

indent_oc_block                           { False, True }
  Indent OC blocks at brace level instead of usual rules.

indent_oc_block_msg                       Number
  Indent OC blocks in a message relative to the parameter name.
  0=use indent_oc_block rules, 1+=spaces to indent

indent_oc_msg_colon                       Number
  Minimum indent for subsequent parameters

indent_oc_msg_prioritize_first_colon      { False, True }
  If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
  Default is true.

indent_oc_block_msg_xcode_style           { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).

indent_oc_block_msg_from_keyword          { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.

indent_oc_block_msg_from_colon            { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.

indent_oc_block_msg_from_caret            { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.

indent_oc_block_msg_from_brace            { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.

indent_min_vbrace_open                    Number
  When identing after virtual brace open and newline add further spaces to reach this min. indent.

indent_vbrace_open_on_tabstop             { False, True }
  TRUE: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.

#
# Spacing options
#

sp_arith                                  { Ignore, Add, Remove, Force }
  Add or remove space around arithmetic operator '+', '-', '/', '*', etc

sp_assign                                 { Ignore, Add, Remove, Force }
  Add or remove space around assignment operator '=', '+=', etc

sp_cpp_lambda_assign                      { Ignore, Add, Remove, Force }
  Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign

sp_cpp_lambda_paren                       { Ignore, Add, Remove, Force }
  Add or remove space after the capture specification in C++11 lambda.

sp_assign_default                         { Ignore, Add, Remove, Force }
  Add or remove space around assignment operator '=' in a prototype

sp_before_assign                          { Ignore, Add, Remove, Force }
  Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.

sp_after_assign                           { Ignore, Add, Remove, Force }
  Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.

sp_enum_paren                             { Ignore, Add, Remove, Force }
  Add or remove space in 'NS_ENUM ('

sp_enum_assign                            { Ignore, Add, Remove, Force }
  Add or remove space around assignment '=' in enum

sp_enum_before_assign                     { Ignore, Add, Remove, Force }
  Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.

sp_enum_after_assign                      { Ignore, Add, Remove, Force }
  Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.

sp_pp_concat                              { Ignore, Add, Remove, Force }
  Add or remove space around preprocessor '##' concatenation operator. Default=Add

sp_pp_stringify                           { Ignore, Add, Remove, Force }
  Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.

sp_before_pp_stringify                    { Ignore, Add, Remove, Force }
  Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.

sp_bool                                   { Ignore, Add, Remove, Force }
  Add or remove space around boolean operators '&&' and '||'

sp_compare                                { Ignore, Add, Remove, Force }
  Add or remove space around compare operator '<', '>', '==', etc

sp_inside_paren                           { Ignore, Add, Remove, Force }
  Add or remove space inside '(' and ')'

sp_paren_paren                            { Ignore, Add, Remove, Force }
  Add or remove space between nested parens: '((' vs ') )'

sp_cparen_oparen                          { Ignore, Add, Remove, Force }
  Add or remove space between back-to-back parens: ')(' vs ') ('

sp_balance_nested_parens                  { False, True }
  Whether to balance spaces inside nested parens

sp_paren_brace                            { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{'

sp_before_ptr_star                        { Ignore, Add, Remove, Force }
  Add or remove space before pointer star '*'

sp_before_unnamed_ptr_star                { Ignore, Add, Remove, Force }
  Add or remove space before pointer star '*' that isn't followed by a variable name
  If set to 'ignore', sp_before_ptr_star is used instead.

sp_between_ptr_star                       { Ignore, Add, Remove, Force }
  Add or remove space between pointer stars '*'

sp_after_ptr_star                         { Ignore, Add, Remove, Force }
  Add or remove space after pointer star '*', if followed by a word.

sp_after_ptr_star_qualifier               { Ignore, Add, Remove, Force }
  Add or remove space after pointer star '*', if followed by a qualifier.

sp_after_ptr_star_func                    { Ignore, Add, Remove, Force }
  Add or remove space after a pointer star '*', if followed by a func proto/def.

sp_ptr_star_paren                         { Ignore, Add, Remove, Force }
  Add or remove space after a pointer star '*', if followed by an open paren (function types).

sp_before_ptr_star_func                   { Ignore, Add, Remove, Force }
  Add or remove space before a pointer star '*', if followed by a func proto/def.

sp_before_byref                           { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&'

sp_before_unnamed_byref                   { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&' that isn't followed by a variable name
  If set to 'ignore', sp_before_byref is used instead.

sp_after_byref                            { Ignore, Add, Remove, Force }
  Add or remove space after reference sign '&', if followed by a word.

sp_after_byref_func                       { Ignore, Add, Remove, Force }
  Add or remove space after a reference sign '&', if followed by a func proto/def.

sp_before_byref_func                      { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&', if followed by a func proto/def.

sp_after_type                             { Ignore, Add, Remove, Force }
  Add or remove space between type and word. Default=Force

sp_before_template_paren                  { Ignore, Add, Remove, Force }
  Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.

sp_template_angle                         { Ignore, Add, Remove, Force }
  Add or remove space in 'template <' vs 'template<'.
  If set to ignore, sp_before_angle is used.

sp_before_angle                           { Ignore, Add, Remove, Force }
  Add or remove space before '<>'

sp_inside_angle                           { Ignore, Add, Remove, Force }
  Add or remove space inside '<' and '>'

sp_after_angle                            { Ignore, Add, Remove, Force }
  Add or remove space after '<>'

sp_angle_paren                            { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and '(' as found in 'new List<byte>();'

sp_angle_word                             { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and a word as in 'List<byte> m;'

sp_angle_shift                            { Ignore, Add, Remove, Force }
  Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add

sp_permit_cpp11_shift                     { False, True }
  Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
  sp_angle_shift cannot remove the space without this option.

sp_before_sparen                          { Ignore, Add, Remove, Force }
  Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.

sp_inside_sparen                          { Ignore, Add, Remove, Force }
  Add or remove space inside if-condition '(' and ')'

sp_inside_sparen_close                    { Ignore, Add, Remove, Force }
  Add or remove space before if-condition ')'. Overrides sp_inside_sparen.

sp_inside_sparen_open                     { Ignore, Add, Remove, Force }
  Add or remove space after if-condition '('. Overrides sp_inside_sparen.

sp_after_sparen                           { Ignore, Add, Remove, Force }
  Add or remove space after ')' of 'if', 'for', 'switch', and 'while'

sp_sparen_brace                           { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'

sp_invariant_paren                        { Ignore, Add, Remove, Force }
  Add or remove space between 'invariant' and '(' in the D language.

sp_after_invariant_paren                  { Ignore, Add, Remove, Force }
  Add or remove space after the ')' in 'invariant (C) c' in the D language.

sp_special_semi                           { Ignore, Add, Remove, Force }
  Add or remove space before empty statement ';' on 'if', 'for' and 'while'

sp_before_semi                            { Ignore, Add, Remove, Force }
  Add or remove space before ';'. Default=Remove

sp_before_semi_for                        { Ignore, Add, Remove, Force }
  Add or remove space before ';' in non-empty 'for' statements

sp_before_semi_for_empty                  { Ignore, Add, Remove, Force }
  Add or remove space before a semicolon of an empty part of a for statement.

sp_after_semi                             { Ignore, Add, Remove, Force }
  Add or remove space after ';', except when followed by a comment. Default=Add

sp_after_semi_for                         { Ignore, Add, Remove, Force }
  Add or remove space after ';' in non-empty 'for' statements. Default=Force

sp_after_semi_for_empty                   { Ignore, Add, Remove, Force }
  Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).

sp_before_square                          { Ignore, Add, Remove, Force }
  Add or remove space before '[' (except '[]')

sp_before_squares                         { Ignore, Add, Remove, Force }
  Add or remove space before '[]'

sp_inside_square                          { Ignore, Add, Remove, Force }
  Add or remove space inside a non-empty '[' and ']'

sp_after_comma                            { Ignore, Add, Remove, Force }
  Add or remove space after ','

sp_before_comma                           { Ignore, Add, Remove, Force }
  Add or remove space before ','

sp_after_mdatype_commas                   { Ignore, Add, Remove, Force }
  Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'

sp_before_mdatype_commas                  { Ignore, Add, Remove, Force }
  Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'

sp_between_mdatype_commas                 { Ignore, Add, Remove, Force }
  Add or remove space between ',' in multidimensional array type 'int[,,]'

sp_paren_comma                            { Ignore, Add, Remove, Force }
  Add or remove space between an open paren and comma: '(,' vs '( ,'
  

sp_before_ellipsis                        { Ignore, Add, Remove, Force }
  Add or remove space before the variadic '...' when preceded by a non-punctuator

sp_after_class_colon                      { Ignore, Add, Remove, Force }
  Add or remove space after class ':'

sp_before_class_colon                     { Ignore, Add, Remove, Force }
  Add or remove space before class ':'

sp_after_constr_colon                     { Ignore, Add, Remove, Force }
  Add or remove space after class constructor ':'

sp_before_constr_colon                    { Ignore, Add, Remove, Force }
  Add or remove space before class constructor ':'

sp_before_case_colon                      { Ignore, Add, Remove, Force }
  Add or remove space before case ':'. Default=Remove

sp_after_operator                         { Ignore, Add, Remove, Force }
  Add or remove space between 'operator' and operator sign

sp_after_operator_sym                     { Ignore, Add, Remove, Force }
  Add or remove space between the operator symbol and the open paren, as in 'operator ++('

sp_after_cast                             { Ignore, Add, Remove, Force }
  Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'

sp_inside_paren_cast                      { Ignore, Add, Remove, Force }
  Add or remove spaces inside cast parens

sp_cpp_cast_paren                         { Ignore, Add, Remove, Force }
  Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'

sp_sizeof_paren                           { Ignore, Add, Remove, Force }
  Add or remove space between 'sizeof' and '('

sp_after_tag                              { Ignore, Add, Remove, Force }
  Add or remove space after the tag keyword (Pawn)

sp_inside_braces_enum                     { Ignore, Add, Remove, Force }
  Add or remove space inside enum '{' and '}'

sp_inside_braces_struct                   { Ignore, Add, Remove, Force }
  Add or remove space inside struct/union '{' and '}'

sp_inside_braces                          { Ignore, Add, Remove, Force }
  Add or remove space inside '{' and '}'

sp_inside_braces_empty                    { Ignore, Add, Remove, Force }
  Add or remove space inside '{}'

sp_type_func                              { Ignore, Add, Remove, Force }
  Add or remove space between return type and function name
  A minimum of 1 is forced except for pointer return types.

sp_func_proto_paren                       { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function declaration

sp_func_def_paren                         { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function definition

sp_inside_fparens                         { Ignore, Add, Remove, Force }
  Add or remove space inside empty function '()'

sp_inside_fparen                          { Ignore, Add, Remove, Force }
  Add or remove space inside function '(' and ')'

sp_inside_tparen                          { Ignore, Add, Remove, Force }
  Add or remove space inside the first parens in the function type: 'void (*x)(...)'

sp_after_tparen_close                     { Ignore, Add, Remove, Force }
  Add or remove between the parens in the function type: 'void (*x)(...)'

sp_square_fparen                          { Ignore, Add, Remove, Force }
  Add or remove space between ']' and '(' when part of a function call.

sp_fparen_brace                           { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{' of function

sp_fparen_dbrace                          { Ignore, Add, Remove, Force }
  Java: Add or remove space between ')' and '{{' of double brace initializer.

sp_func_call_paren                        { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function calls

sp_func_call_paren_empty                  { Ignore, Add, Remove, Force }
  Add or remove space between function name and '()' on function calls without parameters.
  If set to 'ignore' (the default), sp_func_call_paren is used.

sp_func_call_user_paren                   { Ignore, Add, Remove, Force }
  Add or remove space between the user function name and '(' on function calls
  You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.

sp_func_class_paren                       { Ignore, Add, Remove, Force }
  Add or remove space between a constructor/destructor and the open paren

sp_return_paren                           { Ignore, Add, Remove, Force }
  Add or remove space between 'return' and '('

sp_attribute_paren                        { Ignore, Add, Remove, Force }
  Add or remove space between '__attribute__' and '('

sp_defined_paren                          { Ignore, Add, Remove, Force }
  Add or remove space between 'defined' and '(' in '#if defined (FOO)'

sp_throw_paren                            { Ignore, Add, Remove, Force }
  Add or remove space between 'throw' and '(' in 'throw (something)'

sp_after_throw                            { Ignore, Add, Remove, Force }
  Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'

sp_catch_paren                            { Ignore, Add, Remove, Force }
  Add or remove space between 'catch' and '(' in 'catch (something) { }'
  If set to ignore, sp_before_sparen is used.

sp_version_paren                          { Ignore, Add, Remove, Force }
  Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
  If set to ignore, sp_before_sparen is used.

sp_scope_paren                            { Ignore, Add, Remove, Force }
  Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
  If set to ignore, sp_before_sparen is used.

sp_macro                                  { Ignore, Add, Remove, Force }
  Add or remove space between macro and value

sp_macro_func                             { Ignore, Add, Remove, Force }
  Add or remove space between macro function ')' and value

sp_else_brace                             { Ignore, Add, Remove, Force }
  Add or remove space between 'else' and '{' if on the same line

sp_brace_else                             { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'else' if on the same line

sp_brace_typedef                          { Ignore, Add, Remove, Force }
  Add or remove space between '}' and the name of a typedef on the same line

sp_catch_brace                            { Ignore, Add, Remove, Force }
  Add or remove space between 'catch' and '{' if on the same line

sp_brace_catch                            { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'catch' if on the same line

sp_finally_brace                          { Ignore, Add, Remove, Force }
  Add or remove space between 'finally' and '{' if on the same line

sp_brace_finally                          { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'finally' if on the same line

sp_try_brace                              { Ignore, Add, Remove, Force }
  Add or remove space between 'try' and '{' if on the same line

sp_getset_brace                           { Ignore, Add, Remove, Force }
  Add or remove space between get/set and '{' if on the same line

sp_word_brace                             { Ignore, Add, Remove, Force }
  Add or remove space between a variable and '{' for C++ uniform initialization

sp_word_brace_ns                          { Ignore, Add, Remove, Force }
  Add or remove space between a variable and '{' for a namespace

sp_before_dc                              { Ignore, Add, Remove, Force }
  Add or remove space before the '::' operator

sp_after_dc                               { Ignore, Add, Remove, Force }
  Add or remove space after the '::' operator

sp_d_array_colon                          { Ignore, Add, Remove, Force }
  Add or remove around the D named array initializer ':' operator

sp_not                                    { Ignore, Add, Remove, Force }
  Add or remove space after the '!' (not) operator. Default=Remove

sp_inv                                    { Ignore, Add, Remove, Force }
  Add or remove space after the '~' (invert) operator. Default=Remove

sp_addr                                   { Ignore, Add, Remove, Force }
  Add or remove space after the '&' (address-of) operator. Default=Remove
  This does not affect the spacing after a '&' that is part of a type.

sp_member                                 { Ignore, Add, Remove, Force }
  Add or remove space around the '.' or '->' operators. Default=Remove

sp_deref                                  { Ignore, Add, Remove, Force }
  Add or remove space after the '*' (dereference) operator. Default=Remove
  This does not affect the spacing after a '*' that is part of a type.

sp_sign                                   { Ignore, Add, Remove, Force }
  Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove

sp_incdec                                 { Ignore, Add, Remove, Force }
  Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove

sp_before_nl_cont                         { Ignore, Add, Remove, Force }
  Add or remove space before a backslash-newline at the end of a line. Default=Add

sp_after_oc_scope                         { Ignore, Add, Remove, Force }
  Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'

sp_after_oc_colon                         { Ignore, Add, Remove, Force }
  Add or remove space after the colon in message specs
  '-(int) f:(int) x;' vs '-(int) f: (int) x;'

sp_before_oc_colon                        { Ignore, Add, Remove, Force }
  Add or remove space before the colon in message specs
  '-(int) f: (int) x;' vs '-(int) f : (int) x;'

sp_after_oc_dict_colon                    { Ignore, Add, Remove, Force }
  Add or remove space after the colon in immutable dictionary expression
  'NSDictionary *test = @{@"foo" :@"bar"};'

sp_before_oc_dict_colon                   { Ignore, Add, Remove, Force }
  Add or remove space before the colon in immutable dictionary expression
  'NSDictionary *test = @{@"foo" :@"bar"};'

sp_after_send_oc_colon                    { Ignore, Add, Remove, Force }
  Add or remove space after the colon in message specs
  '[object setValue:1];' vs '[object setValue: 1];'

sp_before_send_oc_colon                   { Ignore, Add, Remove, Force }
  Add or remove space before the colon in message specs
  '[object setValue:1];' vs '[object setValue :1];'

sp_after_oc_type                          { Ignore, Add, Remove, Force }
  Add or remove space after the (type) in message specs
  '-(int)f: (int) x;' vs '-(int)f: (int)x;'

sp_after_oc_return_type                   { Ignore, Add, Remove, Force }
  Add or remove space after the first (type) in message specs
  '-(int) f:(int)x;' vs '-(int)f:(int)x;'

sp_after_oc_at_sel                        { Ignore, Add, Remove, Force }
  Add or remove space between '@selector' and '('
  '@selector(msgName)' vs '@selector (msgName)'
  Also applies to @protocol() constructs

sp_after_oc_at_sel_parens                 { Ignore, Add, Remove, Force }
  Add or remove space between '@selector(x)' and the following word
  '@selector(foo) a:' vs '@selector(foo)a:'

sp_inside_oc_at_sel_parens                { Ignore, Add, Remove, Force }
  Add or remove space inside '@selector' parens
  '@selector(foo)' vs '@selector( foo )'
  Also applies to @protocol() constructs

sp_before_oc_block_caret                  { Ignore, Add, Remove, Force }
  Add or remove space before a block pointer caret
  '^int (int arg){...}' vs. ' ^int (int arg){...}'

sp_after_oc_block_caret                   { Ignore, Add, Remove, Force }
  Add or remove space after a block pointer caret
  '^int (int arg){...}' vs. '^ int (int arg){...}'

sp_after_oc_msg_receiver                  { Ignore, Add, Remove, Force }
  Add or remove space between the receiver and selector in a message.
  '[receiver selector ...]'

sp_after_oc_property                      { Ignore, Add, Remove, Force }
  Add or remove space after @property.

sp_cond_colon                             { Ignore, Add, Remove, Force }
  Add or remove space around the ':' in 'b ? t : f'

sp_cond_colon_before                      { Ignore, Add, Remove, Force }
  Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.

sp_cond_colon_after                       { Ignore, Add, Remove, Force }
  Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.

sp_cond_question                          { Ignore, Add, Remove, Force }
  Add or remove space around the '?' in 'b ? t : f'

sp_cond_question_before                   { Ignore, Add, Remove, Force }
  Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.

sp_cond_question_after                    { Ignore, Add, Remove, Force }
  Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.

sp_cond_ternary_short                     { Ignore, Add, Remove, Force }
  In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.

sp_case_label                             { Ignore, Add, Remove, Force }
  Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.

sp_range                                  { Ignore, Add, Remove, Force }
  Control the space around the D '..' operator.

sp_after_for_colon                        { Ignore, Add, Remove, Force }
  Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)

sp_before_for_colon                       { Ignore, Add, Remove, Force }
  Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)

sp_extern_paren                           { Ignore, Add, Remove, Force }
  Control the spacing in 'extern (C)' (D)

sp_cmt_cpp_start                          { Ignore, Add, Remove, Force }
  Control the space after the opening of a C++ comment '// A' vs '//A'

sp_cmt_cpp_doxygen                        { False, True }
  TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.

sp_endif_cmt                              { Ignore, Add, Remove, Force }
  Controls the spaces between #else or #endif and a trailing comment

sp_after_new                              { Ignore, Add, Remove, Force }
  Controls the spaces after 'new', 'delete', and 'delete[]'

sp_between_new_paren                      { Ignore, Add, Remove, Force }
  Controls the spaces between new and '(' in 'new()'

sp_before_tr_emb_cmt                      { Ignore, Add, Remove, Force }
  Controls the spaces before a trailing or embedded comment

sp_num_before_tr_emb_cmt                  Number
  Number of spaces before a trailing or embedded comment

sp_annotation_paren                       { Ignore, Add, Remove, Force }
  Control space between a Java annotation and the open paren.

#
# Code alignment (not left column spaces/tabs)
#

align_keep_tabs                           { False, True }
  Whether to keep non-indenting tabs

align_with_tabs                           { False, True }
  Whether to use tabs for aligning

align_on_tabstop                          { False, True }
  Whether to bump out to the next tab when aligning

align_number_left                         { False, True }
  Whether to left-align numbers

align_keep_extra_space                    { False, True }
  Whether to keep whitespace not required for alignment.

align_func_params                         { False, True }
  Align variable definitions in prototypes and functions

align_same_func_call_params               { False, True }
  Align parameters in single-line functions that have the same name.
  The function names must already be aligned with each other.

align_var_def_span                        Number
  The span for aligning variable definitions (0=don't align)

align_var_def_star_style                  Number
  How to align the star in variable definitions.
   0=Part of the type     'void *   foo;'
   1=Part of the variable 'void     *foo;'
   2=Dangling             'void    *foo;'

align_var_def_amp_style                   Number
  How to align the '&' in variable definitions.
   0=Part of the type
   1=Part of the variable
   2=Dangling

align_var_def_thresh                      Number
  The threshold for aligning variable definitions (0=no limit)

align_var_def_gap                         Number
  The gap for aligning variable definitions

align_var_def_colon                       { False, True }
  Whether to align the colon in struct bit fields

align_var_def_attribute                   { False, True }
  Whether to align any attribute after the variable name

align_var_def_inline                      { False, True }
  Whether to align inline struct/enum/union variable definitions

align_assign_span                         Number
  The span for aligning on '=' in assignments (0=don't align)

align_assign_thresh                       Number
  The threshold for aligning on '=' in assignments (0=no limit)

align_enum_equ_span                       Number
  The span for aligning on '=' in enums (0=don't align)

align_enum_equ_thresh                     Number
  The threshold for aligning on '=' in enums (0=no limit)

align_var_struct_span                     Number
  The span for aligning struct/union (0=don't align)

align_var_struct_thresh                   Number
  The threshold for aligning struct/union member definitions (0=no limit)

align_var_struct_gap                      Number
  The gap for aligning struct/union member definitions

align_struct_init_span                    Number
  The span for aligning struct initializer values (0=don't align)

align_typedef_gap                         Number
  The minimum space between the type and the synonym of a typedef

align_typedef_span                        Number
  The span for aligning single-line typedefs (0=don't align)

align_typedef_func                        Number
  How to align typedef'd functions with other typedefs
  0: Don't mix them at all
  1: align the open paren with the types
  2: align the function type name with the other type names

align_typedef_star_style                  Number
  Controls the positioning of the '*' in typedefs. Just try it.
  0: Align on typedef type, ignore '*'
  1: The '*' is part of type name: typedef int  *pint;
  2: The '*' is part of the type, but dangling: typedef int *pint;

align_typedef_amp_style                   Number
  Controls the positioning of the '&' in typedefs. Just try it.
  0: Align on typedef type, ignore '&'
  1: The '&' is part of type name: typedef int  &pint;
  2: The '&' is part of the type, but dangling: typedef int &pint;

align_right_cmt_span                      Number
  The span for aligning comments that end lines (0=don't align)

align_right_cmt_mix                       { False, True }
  If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment

align_right_cmt_gap                       Number
  If a trailing comment is more than this number of columns away from the text it follows,
  it will qualify for being aligned. This has to be > 0 to do anything.

align_right_cmt_at_col                    Number
  Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)

align_func_proto_span                     Number
  The span for aligning function prototypes (0=don't align)

align_func_proto_gap                      Number
  Minimum gap between the return type and the function name.

align_on_operator                         { False, True }
  Align function protos on the 'operator' keyword instead of what follows

align_mix_var_proto                       { False, True }
  Whether to mix aligning prototype and variable declarations.
  If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.

align_single_line_func                    { False, True }
  Align single-line functions with function prototypes, uses align_func_proto_span

align_single_line_brace                   { False, True }
  Aligning the open brace of single-line functions.
  Requires align_single_line_func=true, uses align_func_proto_span

align_single_line_brace_gap               Number
  Gap for align_single_line_brace.
  

align_oc_msg_spec_span                    Number
  The span for aligning ObjC msg spec (0=don't align)

align_nl_cont                             { False, True }
  Whether to align macros wrapped with a backslash and a newline.
  This will not work right if the macro contains a multi-line comment.

align_pp_define_together                  { False, True }
  # Align macro functions and variables together
  

align_pp_define_gap                       Number
  The minimum space between label and value of a preprocessor define

align_pp_define_span                      Number
  The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)

align_left_shift                          { False, True }
  Align lines that start with '<<' with previous '<<'. Default=true

align_oc_msg_colon_span                   Number
  Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)

align_oc_msg_colon_first                  { False, True }
  If true, always align with the first parameter, even if it is too short.

align_oc_decl_colon                       { False, True }
  Aligning parameters in an Obj-C '+' or '-' declaration on the ':'

#
# Newline adding and removing options
#

nl_collapse_empty_body                    { False, True }
  Whether to collapse empty blocks between '{' and '}'

nl_assign_leave_one_liners                { False, True }
  Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'

nl_class_leave_one_liners                 { False, True }
  Don't split one-line braced statements inside a class xx { } body

nl_enum_leave_one_liners                  { False, True }
  Don't split one-line enums: 'enum foo { BAR = 15 };'

nl_getset_leave_one_liners                { False, True }
  Don't split one-line get or set functions

nl_func_leave_one_liners                  { False, True }
  Don't split one-line function definitions - 'int foo() { return 0; }'

nl_cpp_lambda_leave_one_liners            { False, True }
  Don't split one-line C++11 lambdas - '[]() { return 0; }'

nl_if_leave_one_liners                    { False, True }
  Don't split one-line if/else statements - 'if(a) b++;'

nl_oc_msg_leave_one_liner                 { False, True }
  Don't split one-line OC messages

nl_start_of_file                          { Ignore, Add, Remove, Force }
  Add or remove newlines at the start of the file

nl_start_of_file_min                      Number
  The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'

nl_end_of_file                            { Ignore, Add, Remove, Force }
  Add or remove newline at the end of the file

nl_end_of_file_min                        Number
  The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')

nl_assign_brace                           { Ignore, Add, Remove, Force }
  Add or remove newline between '=' and '{'

nl_assign_square                          { Ignore, Add, Remove, Force }
  Add or remove newline between '=' and '[' (D only)

nl_after_square_assign                    { Ignore, Add, Remove, Force }
  Add or remove newline after '= [' (D only). Will also affect the newline before the ']'

nl_func_var_def_blk                       Number
  The number of blank lines after a block of variable definitions at the top of a function body
  0 = No change (default)

nl_typedef_blk_start                      Number
  The number of newlines before a block of typedefs
  0 = No change (default)

nl_typedef_blk_end                        Number
  The number of newlines after a block of typedefs
  0 = No change (default)

nl_typedef_blk_in                         Number
  The maximum consecutive newlines within a block of typedefs
  0 = No change (default)

nl_var_def_blk_start                      Number
  The number of newlines before a block of variable definitions not at the top of a function body
  0 = No change (default)

nl_var_def_blk_end                        Number
  The number of newlines after a block of variable definitions not at the top of a function body
  0 = No change (default)

nl_var_def_blk_in                         Number
  The maximum consecutive newlines within a block of variable definitions
  0 = No change (default)

nl_fcall_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between a function call's ')' and '{', as in:
  list_for_each(item, &list) { }

nl_enum_brace                             { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum' and '{'

nl_struct_brace                           { Ignore, Add, Remove, Force }
  Add or remove newline between 'struct and '{'

nl_union_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'union' and '{'

nl_if_brace                               { Ignore, Add, Remove, Force }
  Add or remove newline between 'if' and '{'

nl_brace_else                             { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'else'

nl_elseif_brace                           { Ignore, Add, Remove, Force }
  Add or remove newline between 'else if' and '{'
  If set to ignore, nl_if_brace is used instead

nl_else_brace                             { Ignore, Add, Remove, Force }
  Add or remove newline between 'else' and '{'

nl_else_if                                { Ignore, Add, Remove, Force }
  Add or remove newline between 'else' and 'if'

nl_brace_finally                          { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'finally'

nl_finally_brace                          { Ignore, Add, Remove, Force }
  Add or remove newline between 'finally' and '{'

nl_try_brace                              { Ignore, Add, Remove, Force }
  Add or remove newline between 'try' and '{'

nl_getset_brace                           { Ignore, Add, Remove, Force }
  Add or remove newline between get/set and '{'

nl_for_brace                              { Ignore, Add, Remove, Force }
  Add or remove newline between 'for' and '{'

nl_catch_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'catch' and '{'

nl_brace_catch                            { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'catch'

nl_brace_square                           { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and ']'

nl_brace_fparen                           { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and ')' in a function invocation

nl_while_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'while' and '{'

nl_scope_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'scope (x)' and '{' (D)

nl_unittest_brace                         { Ignore, Add, Remove, Force }
  Add or remove newline between 'unittest' and '{' (D)

nl_version_brace                          { Ignore, Add, Remove, Force }
  Add or remove newline between 'version (x)' and '{' (D)

nl_using_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'using' and '{'

nl_brace_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between two open or close braces.
  Due to general newline/brace handling, REMOVE may not work.

nl_do_brace                               { Ignore, Add, Remove, Force }
  Add or remove newline between 'do' and '{'

nl_brace_while                            { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'while' of 'do' statement

nl_switch_brace                           { Ignore, Add, Remove, Force }
  Add or remove newline between 'switch' and '{'

nl_synchronized_brace                     { Ignore, Add, Remove, Force }
  Add or remove newline between 'synchronized' and '{'

nl_multi_line_cond                        { False, True }
  Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
  Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.

nl_multi_line_define                      { False, True }
  Force a newline in a define after the macro name for multi-line defines.

nl_before_case                            { False, True }
  Whether to put a newline before 'case' statement

nl_before_throw                           { Ignore, Add, Remove, Force }
  Add or remove newline between ')' and 'throw'

nl_after_case                             { False, True }
  Whether to put a newline after 'case' statement

nl_case_colon_brace                       { Ignore, Add, Remove, Force }
  Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.

nl_namespace_brace                        { Ignore, Add, Remove, Force }
  Newline between namespace and {

nl_template_class                         { Ignore, Add, Remove, Force }
  Add or remove newline between 'template<>' and whatever follows.

nl_class_brace                            { Ignore, Add, Remove, Force }
  Add or remove newline between 'class' and '{'

nl_class_init_args                        { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in the class base list

nl_constr_init_args                       { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in the constructor member initialization

nl_func_type_name                         { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name in a function definition

nl_func_type_name_class                   { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name inside a class {}
  Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.

nl_func_scope_name                        { Ignore, Add, Remove, Force }
  Add or remove newline between function scope and name in a definition
  Controls the newline after '::' in 'void A::f() { }'

nl_func_proto_type_name                   { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name in a prototype

nl_func_paren                             { Ignore, Add, Remove, Force }
  Add or remove newline between a function name and the opening '('

nl_func_def_paren                         { Ignore, Add, Remove, Force }
  Add or remove newline between a function name and the opening '(' in the definition

nl_func_decl_start                        { Ignore, Add, Remove, Force }
  Add or remove newline after '(' in a function declaration

nl_func_def_start                         { Ignore, Add, Remove, Force }
  Add or remove newline after '(' in a function definition

nl_func_decl_start_single                 { Ignore, Add, Remove, Force }
  Overrides nl_func_decl_start when there is only one parameter.

nl_func_def_start_single                  { Ignore, Add, Remove, Force }
  Overrides nl_func_def_start when there is only one parameter.

nl_func_decl_args                         { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in a function declaration

nl_func_def_args                          { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in a function definition

nl_func_decl_end                          { Ignore, Add, Remove, Force }
  Add or remove newline before the ')' in a function declaration

nl_func_def_end                           { Ignore, Add, Remove, Force }
  Add or remove newline before the ')' in a function definition

nl_func_decl_end_single                   { Ignore, Add, Remove, Force }
  Overrides nl_func_decl_end when there is only one parameter.

nl_func_def_end_single                    { Ignore, Add, Remove, Force }
  Overrides nl_func_def_end when there is only one parameter.

nl_func_decl_empty                        { Ignore, Add, Remove, Force }
  Add or remove newline between '()' in a function declaration.

nl_func_def_empty                         { Ignore, Add, Remove, Force }
  Add or remove newline between '()' in a function definition.

nl_oc_msg_args                            { False, True }
  Whether to put each OC message parameter on a separate line
  See nl_oc_msg_leave_one_liner

nl_fdef_brace                             { Ignore, Add, Remove, Force }
  Add or remove newline between function signature and '{'

nl_cpp_ldef_brace                         { Ignore, Add, Remove, Force }
  Add or remove newline between C++11 lambda signature and '{'

nl_return_expr                            { Ignore, Add, Remove, Force }
  Add or remove a newline between the return keyword and return expression.

nl_after_semicolon                        { False, True }
  Whether to put a newline after semicolons, except in 'for' statements

nl_paren_dbrace_open                      { Ignore, Add, Remove, Force }
  Java: Control the newline between the ')' and '{{' of the double brace initializer.

nl_after_brace_open                       { False, True }
  Whether to put a newline after brace open.
  This also adds a newline before the matching brace close.

nl_after_brace_open_cmt                   { False, True }
  If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
  placed between the open brace and a trailing single-line comment.

nl_after_vbrace_open                      { False, True }
  Whether to put a newline after a virtual brace open with a non-empty body.
  These occur in un-braced if/while/do/for statement bodies.

nl_after_vbrace_open_empty                { False, True }
  Whether to put a newline after a virtual brace open with an empty body.
  These occur in un-braced if/while/do/for statement bodies.

nl_after_brace_close                      { False, True }
  Whether to put a newline after a brace close.
  Does not apply if followed by a necessary ';'.

nl_after_vbrace_close                     { False, True }
  Whether to put a newline after a virtual brace close.
  Would add a newline before return in: 'if (foo) a++; return;'

nl_brace_struct_var                       { Ignore, Add, Remove, Force }
  Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
  Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close

nl_define_macro                           { False, True }
  Whether to alter newlines in '#define' macros

nl_squeeze_ifdef                          { False, True }
  Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'. Does not affect the whole-file #ifdef.

nl_before_if                              { Ignore, Add, Remove, Force }
  Add or remove blank line before 'if'

nl_after_if                               { Ignore, Add, Remove, Force }
  Add or remove blank line after 'if' statement

nl_before_for                             { Ignore, Add, Remove, Force }
  Add or remove blank line before 'for'

nl_after_for                              { Ignore, Add, Remove, Force }
  Add or remove blank line after 'for' statement

nl_before_while                           { Ignore, Add, Remove, Force }
  Add or remove blank line before 'while'

nl_after_while                            { Ignore, Add, Remove, Force }
  Add or remove blank line after 'while' statement

nl_before_switch                          { Ignore, Add, Remove, Force }
  Add or remove blank line before 'switch'

nl_after_switch                           { Ignore, Add, Remove, Force }
  Add or remove blank line after 'switch' statement

nl_before_synchronized                    { Ignore, Add, Remove, Force }
  Add or remove blank line before 'synchronized'

nl_after_synchronized                     { Ignore, Add, Remove, Force }
  Add or remove blank line after 'synchronized' statement

nl_before_do                              { Ignore, Add, Remove, Force }
  Add or remove blank line before 'do'

nl_after_do                               { Ignore, Add, Remove, Force }
  Add or remove blank line after 'do/while' statement

nl_ds_struct_enum_cmt                     { False, True }
  Whether to double-space commented-entries in struct/enum

nl_ds_struct_enum_close_brace             { False, True }
  Whether to double-space before the close brace of a struct/union/enum
  (lower priority than 'eat_blanks_before_close_brace')

nl_class_colon                            { Ignore, Add, Remove, Force }
  Add or remove a newline around a class colon.
  Related to pos_class_colon, nl_class_init_args, and pos_class_comma.

nl_constr_colon                           { Ignore, Add, Remove, Force }
  Add or remove a newline around a class constructor colon.
  Related to pos_constr_colon, nl_constr_init_args, and pos_constr_comma.

nl_create_if_one_liner                    { False, True }
  Change simple unbraced if statements into a one-liner
  'if(b)\n i++;' => 'if(b) i++;'

nl_create_for_one_liner                   { False, True }
  Change simple unbraced for statements into a one-liner
  'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'

nl_create_while_one_liner                 { False, True }
  Change simple unbraced while statements into a one-liner
  'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'

#
# Positioning options
#

pos_arith                                 { Ignore, Lead, Trail }
  The position of arithmetic operators in wrapped expressions

pos_assign                                { Ignore, Lead, Trail }
  The position of assignment in wrapped expressions.
  Do not affect '=' followed by '{'

pos_bool                                  { Ignore, Lead, Trail }
  The position of boolean operators in wrapped expressions

pos_compare                               { Ignore, Lead, Trail }
  The position of comparison operators in wrapped expressions

pos_conditional                           { Ignore, Lead, Trail }
  The position of conditional (b ? t : f) operators in wrapped expressions

pos_comma                                 { Ignore, Lead, Trail }
  The position of the comma in wrapped expressions

pos_class_comma                           { Ignore, Lead, Trail }
  The position of the comma in the class base list

pos_constr_comma                          { Ignore, Lead, Trail }
  The position of the comma in the constructor initialization list

pos_class_colon                           { Ignore, Lead, Trail }
  The position of colons between class and base class list

pos_constr_colon                          { Ignore, Lead, Trail }
  The position of colons between constructor and member initialization

#
# Line Splitting options
#

code_width                                Number
  Try to limit code width to N number of columns

ls_for_split_full                         { False, True }
  Whether to fully split long 'for' statements at semi-colons

ls_func_split_full                        { False, True }
  Whether to fully split long function protos/calls at commas

ls_code_width                             { False, True }
  Whether to split lines as close to code_width as possible and ignore some groupings

#
# Blank line options
#

nl_max                                    Number
  The maximum consecutive newlines

nl_after_func_proto                       Number
  The number of newlines after a function prototype, if followed by another function prototype

nl_after_func_proto_group                 Number
  The number of newlines after a function prototype, if not followed by another function prototype

nl_after_func_body                        Number
  The number of newlines after '}' of a multi-line function body

nl_after_func_body_class                  Number
  The number of newlines after '}' of a multi-line function body in a class declaration

nl_after_func_body_one_liner              Number
  The number of newlines after '}' of a single line function body

nl_before_block_comment                   Number
  The minimum number of newlines before a multi-line comment.
  Doesn't apply if after a brace open or another multi-line comment.

nl_before_c_comment                       Number
  The minimum number of newlines before a single-line C comment.
  Doesn't apply if after a brace open or other single-line C comments.

nl_before_cpp_comment                     Number
  The minimum number of newlines before a CPP comment.
  Doesn't apply if after a brace open or other CPP comments.

nl_after_multiline_comment                { False, True }
  Whether to force a newline after a multi-line comment.

nl_after_label_colon                      { False, True }
  Whether to force a newline after a label's colon.

nl_after_struct                           Number
  The number of newlines after '}' or ';' of a struct/enum/union definition

nl_after_class                            Number
  The number of newlines after '}' or ';' of a class definition

nl_before_access_spec                     Number
  The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
  Will not change the newline count if after a brace open.
  0 = No change.

nl_after_access_spec                      Number
  The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
  0 = No change.

nl_comment_func_def                       Number
  The number of newlines between a function def and the function comment.
  0 = No change.

nl_after_try_catch_finally                Number
  The number of newlines after a try-catch-finally block that isn't followed by a brace close.
  0 = No change.

nl_around_cs_property                     Number
  The number of newlines before and after a property, indexer or event decl.
  0 = No change.

nl_between_get_set                        Number
  The number of newlines between the get/set/add/remove handlers in C#.
  0 = No change.

nl_property_brace                         { Ignore, Add, Remove, Force }
  Add or remove newline between C# property and the '{'

eat_blanks_after_open_brace               { False, True }
  Whether to remove blank lines after '{'

eat_blanks_before_close_brace             { False, True }
  Whether to remove blank lines before '}'

nl_remove_extra_newlines                  Number
  How aggressively to remove extra newlines not in preproc.
  0: No change
  1: Remove most newlines not handled by other config
  2: Remove all newlines and reformat completely by config

nl_before_return                          { False, True }
  Whether to put a blank line before 'return' statements, unless after an open brace.

nl_after_return                           { False, True }
  Whether to put a blank line after 'return' statements, unless followed by a close brace.

nl_after_annotation                       { Ignore, Add, Remove, Force }
  Whether to put a newline after a Java annotation statement.
  Only affects annotations that are after a newline.

nl_between_annotation                     { Ignore, Add, Remove, Force }
  Controls the newline between two annotations.

#
# Code modifying options (non-whitespace)
#

mod_full_brace_do                         { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'do' statement

mod_full_brace_for                        { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'for' statement

mod_full_brace_function                   { Ignore, Add, Remove, Force }
  Add or remove braces on single-line function definitions. (Pawn)

mod_full_brace_if                         { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.

mod_full_brace_if_chain                   { False, True }
  Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
  If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.

mod_full_brace_nl                         Number
  Don't remove braces around statements that span N newlines

mod_full_brace_while                      { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'while' statement

mod_full_brace_using                      { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'using ()' statement

mod_paren_on_return                       { Ignore, Add, Remove, Force }
  Add or remove unnecessary paren on 'return' statement

mod_pawn_semicolon                        { False, True }
  Whether to change optional semicolons to real semicolons

mod_full_paren_if_bool                    { False, True }
  Add parens on 'while' and 'if' statement around bools

mod_remove_extra_semicolon                { False, True }
  Whether to remove superfluous semicolons

mod_add_long_function_closebrace_comment  Number
  If a function body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_namespace_closebrace_comment Number
  If a namespace body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_switch_closebrace_comment    Number
  If a switch body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_ifdef_endif_comment          Number
  If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
  the #endif, a comment will be added.

mod_add_long_ifdef_else_comment           Number
  If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
  the #else, a comment will be added.

mod_sort_import                           { False, True }
  If TRUE, will sort consecutive single-line 'import' statements [Java, D]

mod_sort_using                            { False, True }
  If TRUE, will sort consecutive single-line 'using' statements [C#]

mod_sort_include                          { False, True }
  If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
  This is generally a bad idea, as it may break your code.

mod_move_case_break                       { False, True }
  If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.

mod_case_brace                            { Ignore, Add, Remove, Force }
  Will add or remove the braces around a fully braced case statement.
  Will only remove the braces if there are no variable declarations in the block.

mod_remove_empty_return                   { False, True }
  If TRUE, it will remove a void 'return;' that appears as the last statement in a function.

#
# Comment modifications
#

cmt_width                                 Number
  Try to wrap comments at cmt_width columns

cmt_reflow_mode                           Number
  Set the comment reflow mode (default: 0)
  0: no reflowing (apart from the line wrapping due to cmt_width)
  1: no touching at all
  2: full reflow
  

cmt_convert_tab_to_spaces                 { False, True }
  Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.

cmt_indent_multi                          { False, True }
  If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
  Default is true.

cmt_c_group                               { False, True }
  Whether to group c-comments that look like they are in a block

cmt_c_nl_start                            { False, True }
  Whether to put an empty '/*' on the first line of the combined c-comment

cmt_c_nl_end                              { False, True }
  Whether to put a newline before the closing '*/' of the combined c-comment

cmt_cpp_group                             { False, True }
  Whether to group cpp-comments that look like they are in a block

cmt_cpp_nl_start                          { False, True }
  Whether to put an empty '/*' on the first line of the combined cpp-comment

cmt_cpp_nl_end                            { False, True }
  Whether to put a newline before the closing '*/' of the combined cpp-comment

cmt_cpp_to_c                              { False, True }
  Whether to change cpp-comments into c-comments

cmt_star_cont                             { False, True }
  Whether to put a star on subsequent comment lines

cmt_sp_before_star_cont                   Number
  The number of spaces to insert at the start of subsequent comment lines

cmt_sp_after_star_cont                    Number
  The number of spaces to insert after the star on subsequent comment lines

cmt_multi_check_last                      { False, True }
  For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
  the comment are the same length. Default=True

cmt_insert_file_header                    String
  The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
  Will substitute $(filename) with the current file's name.

cmt_insert_file_footer                    String
  The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
  Will substitute $(filename) with the current file's name.

cmt_insert_func_header                    String
  The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
  Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
  Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }

cmt_insert_class_header                   String
  The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
  Will substitute $(class) with the class name.

cmt_insert_oc_msg_header                  String
  The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
  Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.

cmt_insert_before_preproc                 { False, True }
  If a preprocessor is encountered when stepping backwards from a function name, then
  this option decides whether the comment should be inserted.
  Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.

#
# Preprocessor options
#

pp_indent                                 { Ignore, Add, Remove, Force }
  Control indent of preprocessors inside #if blocks at brace level 0 (file-level)

pp_indent_at_level                        { False, True }
  Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)

pp_indent_count                           Number
  Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
  If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
  Default=1.

pp_space                                  { Ignore, Add, Remove, Force }
  Add or remove space after # based on pp_level of #if blocks

pp_space_count                            Number
  Sets the number of spaces added with pp_space

pp_indent_region                          Number
  The indent for #region and #endregion in C# and '#pragma region' in C/C++

pp_region_indent_code                     { False, True }
  Whether to indent the code between #region and #endregion

pp_indent_if                              Number
  If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level.
  0:  indent preprocessors using output_tab_size.
  >0: column at which all preprocessors will be indented.

pp_if_indent_code                         { False, True }
  Control whether to indent the code between #if, #else and #endif.

pp_define_at_level                        { False, True }
  Whether to indent '#define' at the brace level (true) or from column 1 (false)