failed at first install

[SirWesthoff]

my hardware is a raspberry pi 3 modell b with debian stretch lite installed, openhab2 already running.

*** make modules_prepare
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
.config:803:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
.config:805:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
.config:806:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
.config:823:warning: symbol value 'm' invalid for NF_NAT_PROTO_DCCP
.config:824:warning: symbol value 'm' invalid for NF_NAT_PROTO_UDPLITE
.config:825:warning: symbol value 'm' invalid for NF_NAT_PROTO_SCTP
*

• Restart config...
• IRQ subsystem

Expose hardware/virtual IRQ mapping via debugfs (IRQ_DOMAIN_DEBUG) [N/y/?] n
Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) aborted!

Console input/output is redirected. Run 'make oldconfig' to update configuration.

scripts/kconfig/Makefile:38: recipe for target 'silentoldconfig' failed
make[2]: *** [silentoldconfig] Error 1
Makefile:544: recipe for target 'silentoldconfig' failed
make[1]: *** [silentoldconfig] Error 2
make: *** No rule to make target 'modules_prepare'. Stop.
Traceback (most recent call last):
File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 379, in
sh("cd %s && make modules_prepare %s" % (linux_symlink, (" > /dev/null" if args.quiet else "")))
File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 85, in sh
subprocess.check_call(cmd, shell=True)
File "/usr/lib/python2.7/subprocess.py", line 186, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'cd /usr/src/linux && make modules_prepare ' returned non-zero exit status 2
Blocking new kernel updates, please do not use rpi-update anymore, or run this module after kernel update again
Installing kernel modules
Building eq3 kernel modules
make -C /lib/modules/4.9.80-v7+/build M=/tmp/tmp.EPCexVQm5I/kernel modules
make[1]: Entering directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130'

ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.

CC [M] /tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o
In file included from :0:0:
././include/linux/kconfig.h:5:32: fatal error: generated/autoconf.h: No such file or directory
#include <generated/autoconf.h>
^
compilation terminated.
scripts/Makefile.build:326: recipe for target '/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o' failed
make[2]: *** [/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o] Error 1
Makefile:1508: recipe for target 'module/tmp/tmp.EPCexVQm5I/kernel' failed
make[1]: *** [module/tmp/tmp.EPCexVQm5I/kernel] Error 2
make[1]: Leaving directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130'
Makefile:16: recipe for target 'all' failed
make: *** [all] Error 2
ERROR: Problem while building eq3 module, exit

[leonsio]

Nutzt du Standard Treiber oder eins über rpi-update? Gruß Leo Von meinem iPhone gesendet

…

Am 14.03.2018 um 23:21 schrieb heartsaver1859 ***@***.***>: my hardware is a raspberry pi 3 modell b with debian stretch lite installed, openhab2 already running. *** make modules_prepare HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf --silentoldconfig Kconfig .config:803⚠️ symbol value 'm' invalid for NF_CT_PROTO_DCCP .config:805⚠️ symbol value 'm' invalid for NF_CT_PROTO_SCTP .config:806⚠️ symbol value 'm' invalid for NF_CT_PROTO_UDPLITE .config:823⚠️ symbol value 'm' invalid for NF_NAT_PROTO_DCCP .config:824⚠️ symbol value 'm' invalid for NF_NAT_PROTO_UDPLITE .config:825⚠️ symbol value 'm' invalid for NF_NAT_PROTO_SCTP * Restart config... IRQ subsystem Expose hardware/virtual IRQ mapping via debugfs (IRQ_DOMAIN_DEBUG) [N/y/?] n Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. scripts/kconfig/Makefile:38: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 Makefile:544: recipe for target 'silentoldconfig' failed make[1]: *** [silentoldconfig] Error 2 make: *** No rule to make target 'modules_prepare'. Stop. Traceback (most recent call last): File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 379, in sh("cd %s && make modules_prepare %s" % (linux_symlink, (" > /dev/null" if args.quiet else ""))) File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 85, in sh subprocess.check_call(cmd, shell=True) File "/usr/lib/python2.7/subprocess.py", line 186, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command 'cd /usr/src/linux && make modules_prepare ' returned non-zero exit status 2 Blocking new kernel updates, please do not use rpi-update anymore, or run this module after kernel update again Installing kernel modules Building eq3 kernel modules make -C /lib/modules/4.9.80-v7+/build M=/tmp/tmp.EPCexVQm5I/kernel modules make[1]: Entering directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. CC [M] /tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o In file included from :0:0: ././include/linux/kconfig.h:5:32: fatal error: generated/autoconf.h: No such file or directory #include <generated/autoconf.h> ^ compilation terminated. scripts/Makefile.build:326: recipe for target '/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o' failed make[2]: *** [/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o] Error 1 Makefile:1508: recipe for target 'module/tmp/tmp.EPCexVQm5I/kernel' failed make[1]: *** [module/tmp/tmp.EPCexVQm5I/kernel] Error 2 make[1]: Leaving directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' Makefile:16: recipe for target 'all' failed make: *** [all] Error 2 ERROR: Problem while building eq3 module, exit — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

[SirWesthoff]

Wie meinst du das? Ich habe openhab2 installiert und die addons. Und versucht yahm via quickinstall zu installieren. Gruß Marcel Von: Leonid Kogan <[email protected]> Gesendet: Donnerstag, 15. März 2018 09:56 An: leonsio/YAHM <[email protected]> Cc: heartsaver1859 <[email protected]>; Author <[email protected]> Betreff: Re: [leonsio/YAHM] failed at first install (#170) Nutzt du Standard Treiber oder eins über rpi-update? Gruß Leo Von meinem iPhone gesendet

Am 14.03.2018 um 23:21 schrieb heartsaver1859 ***@***.*** ***@***.***> >: my hardware is a raspberry pi 3 modell b with debian stretch lite installed, openhab2 already running. *** make modules_prepare HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf --silentoldconfig Kconfig .config:803⚠️ symbol value 'm' invalid for NF_CT_PROTO_DCCP .config:805⚠️ symbol value 'm' invalid for NF_CT_PROTO_SCTP .config:806⚠️ symbol value 'm' invalid for NF_CT_PROTO_UDPLITE .config:823⚠️ symbol value 'm' invalid for NF_NAT_PROTO_DCCP .config:824⚠️ symbol value 'm' invalid for NF_NAT_PROTO_UDPLITE .config:825⚠️ symbol value 'm' invalid for NF_NAT_PROTO_SCTP * Restart config... IRQ subsystem Expose hardware/virtual IRQ mapping via debugfs (IRQ_DOMAIN_DEBUG) [N/y/?] n Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. scripts/kconfig/Makefile:38: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 Makefile:544: recipe for target 'silentoldconfig' failed make[1]: *** [silentoldconfig] Error 2 make: *** No rule to make target 'modules_prepare'. Stop. Traceback (most recent call last): File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 379, in sh("cd %s && make modules_prepare %s" % (linux_symlink, (" > /dev/null" if args.quiet else ""))) File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 85, in sh subprocess.check_call(cmd, shell=True) File "/usr/lib/python2.7/subprocess.py", line 186, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command 'cd /usr/src/linux && make modules_prepare ' returned non-zero exit status 2 Blocking new kernel updates, please do not use rpi-update anymore, or run this module after kernel update again Installing kernel modules Building eq3 kernel modules make -C /lib/modules/4.9.80-v7+/build M=/tmp/tmp.EPCexVQm5I/kernel modules make[1]: Entering directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. CC [M] /tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o In file included from :0:0: ././include/linux/kconfig.h:5:32: fatal error: generated/autoconf.h: No such file or directory #include <generated/autoconf.h> ^ compilation terminated. scripts/Makefile.build:326: recipe for target '/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o' failed make[2]: *** [/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o] Error 1 Makefile:1508: recipe for target 'module/tmp/tmp.EPCexVQm5I/kernel' failed make[1]: *** [module/tmp/tmp.EPCexVQm5I/kernel] Error 2 make[1]: Leaving directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' Makefile:16: recipe for target 'all' failed make: *** [all] Error 2 ERROR: Problem while building eq3 module, exit — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#170 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AHtaVWXXG1_THMBTIQlArMFknlaNg83Uks5teiy6gaJpZM4SrRDK> . <https://github.com/notifications/beacon/AHtaVZQFnG6C8ZT3NxrJVshqi_iHUJUbks5teiy6gaJpZM4SrRDK.gif>

[leonsio]

Das Problem ist der verwendete Linux Kernel Es kann mein Modul dagegen gebaut werden Daher meine Frage. Hat nix mit openhab zu tun Von meinem iPhone gesendet

…

Am 15.03.2018 um 13:35 schrieb heartsaver1859 ***@***.***>: Wie meinst du das? Ich habe openhab2 installiert und die addons. Und versucht yahm via quickinstall zu installieren. Gruß Marcel Von: Leonid Kogan ***@***.***> Gesendet: Donnerstag, 15. März 2018 09:56 An: leonsio/YAHM ***@***.***> Cc: heartsaver1859 ***@***.***>; Author ***@***.***> Betreff: Re: [leonsio/YAHM] failed at first install (#170) Nutzt du Standard Treiber oder eins über rpi-update? Gruß Leo Von meinem iPhone gesendet > Am 14.03.2018 um 23:21 schrieb heartsaver1859 ***@***.*** ***@***.***> >: > > my hardware is a raspberry pi 3 modell b with debian stretch lite installed, openhab2 already running. > > *** make modules_prepare > HOSTCC scripts/basic/fixdep > HOSTCC scripts/kconfig/conf.o > SHIPPED scripts/kconfig/zconf.tab.c > SHIPPED scripts/kconfig/zconf.lex.c > HOSTCC scripts/kconfig/zconf.tab.o > HOSTLD scripts/kconfig/conf > scripts/kconfig/conf --silentoldconfig Kconfig > .config:803⚠️ symbol value 'm' invalid for NF_CT_PROTO_DCCP > .config:805⚠️ symbol value 'm' invalid for NF_CT_PROTO_SCTP > .config:806⚠️ symbol value 'm' invalid for NF_CT_PROTO_UDPLITE > .config:823⚠️ symbol value 'm' invalid for NF_NAT_PROTO_DCCP > .config:824⚠️ symbol value 'm' invalid for NF_NAT_PROTO_UDPLITE > .config:825⚠️ symbol value 'm' invalid for NF_NAT_PROTO_SCTP > * > > Restart config... > IRQ subsystem > Expose hardware/virtual IRQ mapping via debugfs (IRQ_DOMAIN_DEBUG) [N/y/?] n > Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) aborted! > > Console input/output is redirected. Run 'make oldconfig' to update configuration. > > scripts/kconfig/Makefile:38: recipe for target 'silentoldconfig' failed > make[2]: *** [silentoldconfig] Error 1 > Makefile:544: recipe for target 'silentoldconfig' failed > make[1]: *** [silentoldconfig] Error 2 > make: *** No rule to make target 'modules_prepare'. Stop. > Traceback (most recent call last): > File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 379, in > sh("cd %s && make modules_prepare %s" % (linux_symlink, (" > /dev/null" if args.quiet else ""))) > File "/opt/YAHM/share/tools/rpi-source/rpi-source", line 85, in sh > subprocess.check_call(cmd, shell=True) > File "/usr/lib/python2.7/subprocess.py", line 186, in check_call > raise CalledProcessError(retcode, cmd) > subprocess.CalledProcessError: Command 'cd /usr/src/linux && make modules_prepare ' returned non-zero exit status 2 > Blocking new kernel updates, please do not use rpi-update anymore, or run this module after kernel update again > Installing kernel modules > Building eq3 kernel modules > make -C /lib/modules/4.9.80-v7+/build M=/tmp/tmp.EPCexVQm5I/kernel modules > make[1]: Entering directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' > > ERROR: Kernel configuration is invalid. > include/generated/autoconf.h or include/config/auto.conf are missing. > Run 'make oldconfig && make prepare' on kernel src to fix it. > > CC [M] /tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o > In file included from :0:0: > ././include/linux/kconfig.h:5:32: fatal error: generated/autoconf.h: No such file or directory > #include <generated/autoconf.h> > ^ > compilation terminated. > scripts/Makefile.build:326: recipe for target '/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o' failed > make[2]: *** [/tmp/tmp.EPCexVQm5I/kernel/eq3_char_loop.o] Error 1 > Makefile:1508: recipe for target 'module/tmp/tmp.EPCexVQm5I/kernel' failed > make[1]: *** [module/tmp/tmp.EPCexVQm5I/kernel] Error 2 > make[1]: Leaving directory '/usr/src/linux-80a14a56dacb7cc2b40d5f37d00bedb0ceace130' > Makefile:16: recipe for target 'all' failed > make: *** [all] Error 2 > ERROR: Problem while building eq3 module, exit > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub, or mute the thread. > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#170 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AHtaVWXXG1_THMBTIQlArMFknlaNg83Uks5teiy6gaJpZM4SrRDK> . <https://github.com/notifications/beacon/AHtaVZQFnG6C8ZT3NxrJVshqi_iHUJUbks5teiy6gaJpZM4SrRDK.gif> — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

[SirWesthoff]

Nein ich habe nur nach der Installation einmal apt update && apt upgrade -y laufen lassen. Wie kann ich das Kernel Problem denn umgehen?  Von meinem Samsung Galaxy Smartphone gesendet. null

[leonsio]

Hi Probier mal rm -rf /usr/src/linux* Und führe die Installation erneut aus, bei Fragen einfach Y bzw. J eingeben und Enter drucken. Falls es nicht klappt, dann mit rpi-update auf neuen Kernel gehen (reboot notwendig) und dann nochmal probieren. Gruß Leo

…

Am 15.03.2018 um 20:07 schrieb heartsaver1859 ***@***.***>: Nein ich habe nur nach der Installation einmal apt update && apt upgrade -y laufen lassen. Wie kann ich das Kernel Problem denn umgehen? Von meinem Samsung Galaxy Smartphone gesendet. null — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#170 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAwBF_dQg1S7LssUjaLmwMB25snX_vO9ks5tervygaJpZM4SrRDK>.