- 1. Basics
- 2. Review committee
- 3. Operating principles
- 4. Schedule
- 5. Submission
- 5.1. Registration
- 5.2. How to Submit
- 5.3. Late Submissions
- 5.4. Licensing
- 5.5. Submission content
- 5.6. Directory structure
- 5.7. <system_desc_id>.json metadata
- 5.8. <system_desc_id>_<implementation_id>_<scenario>.json metadata
- 5.9. Logging requirements
- 5.10. Source code requirements for replication
- 5.11. Source code requirements for inference inspection
- 5.12. Source code requirements for training inspection
- 5.13. Compliance Testing
- 6. Review
- 7. Publication
- 8. After publication
- 9. Appendices
These rules describe the submission, review, and publication process for all MLPerf benchmark suites. There are separate rules that govern what to submit for each MLPerf benchmark suite, including:
Unless otherwise stated all rules apply to closed, network and open.
The MLPerf review and publication process is overseen by a review committee.
The review committee consists of the following people:
-
The relevant working group chairs
-
The relevant power working group chairs
-
Optionally, the review chair of relevant working group
-
The executive director
-
The president of the board
-
Representatives of each submitter
If representatives of a single organization, its parents, subsidiaries, or affiliates hold multiple positions on this list, at most one such representative is eligible to vote in the review committee.
The review committee is chaired by the relevant results working group chairs unless a review chair is selected.
The review committee makes decisions during properly scheduled meetings. The base meeting schedule is dictated by the review process. The review committee chair may schedule additional meetings during the review process in the course of any meeting or by emailing all committee members at least 24 hours in advance.
Review committee meetings are typically held virtually.
Review committee meetings are open only to the review committee.
The review committee agenda is set by, and decisions are tracked, using issues filed against the Github submission repo. In general, issues must be filed as dictated by the review process schedule. Exceptions are discouraged but may be allowed during a meeting by a vote of the review committee.
The review committee should attempt to decide issues through discussion and grudging consensus whenever possible. However, if the review committee is unable to reach a grudging consensus, the submitters will vote to decide the issue. Each submitting organization will cast at most one vote per referendum. Non-submitters (including non-submitting chairs, the executive director, and the president of the board) may not vote, except in the case of a tie. In the case of a tie exactly one vote is cast by the first non-submitter from the following list who are able and willing to vote:
-
The non-submitting review chair
-
The non-submitting chairs of the relevant working group collectively
-
The non-submitting chairs of the relevant power working group if invited by the non-submitting chairs of the relevant working group
-
A random number generator
If there are two outcomes, voting proceeds by simple majority. If there are more than two outcomes, voting proceeds by Condorcet poll with the minimax completion rule. Votes are initiated by the chair and are cast openly. Votes may be cast verbally or using a shared spreadsheet or other voting software.
The review committee operates on balance of interests rather than by avoiding conflict of interest. Members may cast votes on all matters, including those directly affecting benchmark submissions made by their organization, as a practical response to the fact that competitors are also on the review committee.
The review committee agenda, deliberations, referenda, votes, and specific decisions are confidential and shared only with committee members and submitters for that round. The general nature of decisions may be shared outside the review process because such decisions may expose the need for rules changes. A submitter may publicly or privately share the specific changes necessary to bring their submission into compliance with their suppliers, contractors, and other partners.
The private submission repository will be deleted when the next relevant MLPerf submission is made public or discontinued.
Review committee decisions do not create precedents. Instead, the decisions should be explicitly incorporated into the rules through the normal process.
MLPerf’s purpose is to produce fair and useful benchmark results.
The MLPerf review committee reserves the right to depart from these rules and/or exclude submissions that conflict with this purpose with a two-thirds (rounded up) vote by the submitters. For instance, if the schedule is discovered to be untenable in practice, it may be amended. If a submission is judged to be deceptive or not of interest to the community, it may be excluded.
The role of the review process is to ensure fairness of submissions, not to litigate details in an effort to disqualify competitors. For example:
-
Reviewing submitters should discuss issues with owning submitters after filing objections, and attempt to resolve the issue if possible.
-
If an objection is supported by the review committee, the objecting submitter should communicate with the owning submitter to ensure a satisfactory fix.
-
Issues in submission that are agreed to require correction, but that do not meaningfully impact performance (less than 2% cumulative performance difference) or competitive ordering may be waived by the review committee, subject to its discretion, and with the understanding that the submitter will correct the issue in future submissions.
MLPerf has several submission rounds each year. Each submission round follows a detailed schedule.
The submission schedule will be set yearly, and must be approved by both the inference and training submitters meetings. The goal is to have two Inference and two Training submissions each year, and to not have them overlap each other. MLCommons attempts to avoid major international holidays, and accommodate relevant conferences.
The MLCommons yearly calendars are located in the MLCommons Members shared drive here. For example, the 2022 calendar is located in this google sheet. Access is limited to MLCommons members for now, since the calendars contain sensitive information. We will look into making public versions of these calendars, but in the meantime, the 2022 calendar is:
| Submission Round | Submision Date | Publication Date |
|---|---|---|
Inference v2.1 |
August 5, 2022 |
August 31, 2022 |
Training v2.1 |
October 14, 2022 |
November 9, 2022 |
Each submission round has the following detailed schedule, which has three major phases:
-
Submission
-
Review
-
Objection filing
-
Objection review
-
Objection revision
-
-
Publication
Each of these phases is described in more detail later in this document.
The exact review period schedule needs to be agreed upon 4 weeks in advance of submission. The following table is an example of the level of detail that the schedule needs to have:
| Day | Meeting or deadline (all deadlines are 11:59pm Pacific Time unless otherwise specified) |
|---|---|
Week -2 |
Presubmission |
Monday |
|
Tuesday |
|
Wednesday |
Submitters must sign CLA and provide primary and secondary POCs with Github handles and email addresses |
Thursday |
|
Friday |
Submitters WG chair creates submission repo. Gives all submitters access. Sends submitter POCs test email requesting they make a test submission to confirm access. |
Week -1 |
Presubmission |
Monday |
|
Tuesday |
|
Wednesday |
|
Thursday |
|
Friday |
All “due in advance” writeups due (e.g. for inference calibration / weight transformation) |
Submitters WG chair distributes random seed(s) for load generation (inference only) |
|
Week 0 |
Submission |
Monday |
|
Tuesday |
|
Wednesday |
|
Thursday |
Last opportunity to notify chair that you will not submit |
Friday |
1:00pm Pacific Time: Submit all required artifacts to the Github repo |
1:30pm Pacific Time: Results summary distributed by the Submitters working group chair |
|
Week 1 |
Review: objection filing |
Monday |
Begin drafting neutral press release [general chair until org, then executive director] |
Tuesday |
Review committee meeting, discuss objections |
Wednesday |
|
Thursday |
Review committee meeting, discuss objections |
Friday |
Objections due in Github, audit results due in GitHub for open, closed and network |
Week 2 |
Review: objection review |
Monday |
Submitter response to objections |
Tuesday |
Review committee meeting, makes easy decisions and requests information about difficult ones |
Wednesday |
Requested information due |
Distribute neutral press release for comment by [general chair until org, then executive director] |
|
Thursday |
Review committee meeting, makes any remaining decisions |
Friday |
|
Week 3 |
Review: objection revision |
Monday |
Must declare all intended hyperparameter borrowing (training only) |
Tuesday |
Review committee meeting, finalize all scores. |
Wednesday |
1:00pm Pacific Time: Final code due |
1:00pm Pacific Time: Final results in human readable form due |
|
1:00pm Pacific Time: Final opportunity to withdraw some or all results |
|
1:30pm Pacific Time: Results summary distributed by Results chair |
|
Approve final draft of press release |
|
Thursday |
Review committee meeting, review results presentations. |
Friday |
|
Week 4 |
Publication |
Monday |
Press and analyst pre-briefings allowed under embargo, all briefings to include neutral press release |
9:30am Pacific Time: submitters can start pre-briefing press under embargo |
|
1:00pm Pacific Time: Draft of results page available for comment |
|
Tuesday |
1:00pm Pacific Time: Corrections to results page due |
5:00pm Pacific Time: Results page and press release live on staging site |
|
Wednesday |
10:00am Pacific Time: results and PR public, press embargo ends |
Each Working Group decides what benchmarks they want in each round. This is a pipelined process, with the following steps:
-
Carrying Capacity Decision - Each working group decides how many benchmarks they can handle for this round.
-
Domain Identification - Working groups review proposals for domain adds/removals from members. The working group will attempt to come to majority consensus in 1 or 2 meetings. If consensus cannot be had, this will go to a vote according to the MLCommons voting rules. Working groups may add up to 2 benchmarks max per round, but will strive for 1 or 0 as the typical case.
-
Sync Domains across working groups (e.g. Inference, Training, and HPC)
-
Identify PIC (person in charge) to drive this domain addition across all working groups
-
For each domain addition, do the two following steps, possibly in parallel:
-
Advisory Board Formation for the domain.
-
Task Force(s) create benchmark proposals. The task force(s) will consider all working groups that might consume this benchmark (e.g. Inference and Training). Ideally benchmark proposals will take around 2 months or less.
-
-
Review benchmark proposals with the Advisory Board. The board approves, rejects, or suggests changes. If changes are needed, the Task Force(s) iterate on making the changes and getting Advisory Board approval until the Advisory Board signs off.
-
Formal working group acceptance - the working group needs to come to consensus on whether or not to accept the benchmark proposal that has now been approved by the Advisory Board. If consensus cannot be had, this will go to a vote according to the MLCommons voting rules.
Some working groups such as HPC may choose to replace the Advisory Board formation with working group consensus, but in general working groups will try their hardest to get third party opinions from non-submitters.
| Time | Event |
|---|---|
T-28 weeks |
Carrying Capacity Decision |
T-26 weeks |
Domain identification, then sync domains across working groups |
T-24 weeks |
PIC identified. Task forces iterating on benchmark proposals. Advisory Board formation |
T-20 weeks |
Advisory Board signs off, Model Frozen, Working groups sync on final benchmark. Finishing touches on benchmark can commence. |
T-16 weeks |
Benchmark code complete. Only bug fixes allowed beyond this point. |
T-12 weeks |
RCPs due (for Training and HPC) |
T-4 weeks |
No more bug fixes. Benchmark code now final. |
T-0 weeks |
Submission |
Working groups are not required to following the timeline above for every round, but are required to complete the process steps. For example, Domain Identification could cover multiple rounds at once, so that step could be accelerated for the next round. Also, the Inference WG has different model freeze and code freeze expectations from the table above (14 weeks and 9 weeks, respectively).
Note that this schedule requires starting 7 months early, which means it needs to be pipelined with prior rounds, given rounds are typically 6 months apart per working group. Working groups are free to start even earlier.
The submission process defines how to submit code and results for review and eventual publication.
Submitters must register with the submitters working group and begin attending meetings at least eight weeks before the deadline. In order to register, a submitter or their org must sign the relevant CLA and provide primary and secondary github handles and primary and secondary POC email address.
The goal of the submission process is to ensure a successful submission for as many submitters as possible in a fair manner. Therefore, the submission process is structured to ensure that submissions are well formed.
A submission is made by placing an encrypted tarball in a MLCommons-provided cloud storage bucket and confirming the submission using an MLCommons web UI.
MLCommons provides a cloud storage bucket [TODO: URL] for submitting encrypted tarballs up to fourteen days before the deadline. Submitters are encouraged to submit as early as possible during this period, since their results will not be visible to others and they will have a chance to fix any issues.
MLCommons provides a web UI [TODO: URL] for verifying scores contained in the tarball. When provided { private key, file name }, the UI decrypts, untars, and runs a submission verifier then displays results or errors. The submitter may confirm results as final and receive an email receipt. All submissions must be confirmed in this manner or they will be disregarded.
Documentation of the web UI usage can be found in this document.
MLPerf will allow submissions for up to 60 minutes after the published deadline without explanation or penalty. This grace period will be advertised as little as possible. The 60 minute limit will be strictly enforced.
If a submitter notifies the submission chair that their submission will be delayed due to force-majeure-type circumstances (e.g. blizzards, hurricanes, terrorism, etc.), the submission chair will delay sharing results for up to 72 hours to allow that submitter more time to make their submission. The extraordinary nature of the circumstances must be approved by the review committee at the first committee meeting or the submission will be disregarded.
All submissions of code must be made under the MLCommons CLA. Per the CLA, all submissions of code will be Apache 2 compatible. Third party libraries need not be Apache 2 licensed.
TODO: Fix this section
python3 -m pip install https://github.com/mlcommons/logging/archive/0.7.1.zip python3 -m mlperf_logging.package_checker <YOUR SUBMISSION_FOLDER> training 0.7.0 python3 -m mlperf_logging.result_summarizer <YOUR SUBMISSION_FOLDER> training 0.7.0
A submission must contain the following:
-
Metadata for the systems under test
-
Code that implements the benchmarks
-
Metadata that describes each system-implementation combination tested
-
Scripts that setup and execute each system-implementation tested
-
Result logs for each system-implementation tested
A submission is for one code base for the benchmarks submitted. An org may make multiple submissions. A submission should take the form of a directory with the following structure. The structure must be followed regardless of the actual location of the actual code, e.g. in the MLPerf repo or an external code host site.
-
<submitting_organization>/
-
systems/
-
<system_desc_id>.json
-
-
benchmarks/
-
<benchmark_name per reference>/ [TODO: rename the reference directories]
-
implementations/
-
<implementation_id>/
-
<arbitrary stuff>
-
-
<system_desc_id>/
-
<system_desc_id>_<implementation_id>.json
-
README.md
-
setup.sh (one-time configuration script)
-
init_datasets.sh (one-time dataset init script)
-
run_and_time.sh (run the benchmark and produce a result)
-
(include any post-processing scripts used to make changes to result logs)
-
-
-
-
-
results/
-
<system_desc_id>/
-
<benchmark>/
-
result_<i>.txt # log file
-
power # optional power logs
-
result_<i>
-
node_<j>.txt
-
sw_<k>.txt
-
-
-
-
-
-
System names and implementation names may be arbitrary.
Training benchmark directory names must be one of { resnet, ssd, bert, unet3d, gpt3, dlrm_dcnv2, gnn, llama2_70b_lora, stable_diffusion } for v4.0. Benchmark directory names are determined from the benchmark keywords used in logging repository for compliance checks.
HPC training submissions follow the above Training directory structure except for the results folder which is adjusted to allow for time-to-train measurements as well as throughput measurements (and pruned throughput logs):
-
results/
-
<system_desc_id>/
-
strong/
-
<benchmark>/
-
result_<i>.txt # log file for time-to-train measurement
-
-
-
weak/
-
<benchmark>/
-
result_<i>.txt # log file for throughput measurement
-
pruned_results/
-
result_<i>.txt # log file for pruned throughput measurement
-
-
-
-
-
-
<submitting_organization>/
-
systems/
-
<system_desc_id>.json # combines hardware and software stack information
-
-
code/
-
<benchmark_name per reference>/
-
<implementation_id>/
-
<Code interface with loadgen and other arbitrary stuff>
-
-
-
-
measurements/
-
<system_desc_id>/
-
<benchmark>/
-
<scenario>
-
<system_desc_id>_<implementation_id>_<scenario>.json
-
README.md
-
user.conf
-
mlperf.conf
-
calibration_process.adoc
-
-
-
-
-
results/
-
<system_desc_id>/
-
<benchmark>/
-
<scenario>
-
performance/
-
run_x/ # 1 run for all scenarios
-
mlperf_log_summary.txt
-
mlperf_log_detail.txt
-
-
-
accuracy/
-
mlperf_log_summary.txt
-
mlperf_log_detail.txt
-
mlperf_log_accuracy.json # truncated by truncate_accuracy_log.py if too large
-
accuracy.txt # stdout of reference accuracy scripts
-
-
-
-
-
-
compliance/
-
<system_desc_id>/
-
<benchmark>/
-
<scenario>
-
<test_id>
-
performance/
-
run_1/ # 1 run for every scenario
-
mlperf_log_summary.txt
-
mlperf_log_detail.txt
-
-
-
accuracy/
-
accuracy.txt # for TEST01 only, generated from truncate_accuracy_log.py
-
mlperf_log_accuracy.json # only necessary for TEST01
-
baseline_accuracy.txt # only for TEST01 if accuracy check fails
-
compliance_accuracy.txt # only for TEST01 if accuracy check fails
-
-
verify_performance.txt
-
verify_accuracy.txt # for TEST01 only
-
-
-
-
-
-
System names and implementation names may be arbitrary.
<benchmark> must be one of {resnet50, retinanet, rnnt, bert-99, bert-99.9, dlrm-99, dlrm-99.9, 3d-unet-99, 3d-unet-99.9}. The postfix '-99' and '-99.9' indicate that the accuracy must be >= 99% or 99.9% of the target accuracy.
<scenario> must be one of {Offline, Server, SingleStream, MultiStream}.
<test_id> must be one of {TEST01, TEST04, TEST05}.
Here is the list of mandatory files for all submissions in any division/category. However, your submission should still include all software information and related information for results replication.
-
mlperf_log_summary.txt
-
mlperf_log_detail.txt
-
mlperf_log_accuracy.json
-
user.conf
-
calibration or weight transformation related code if the original MLPerf models are not used
-
actual models if the models are not deterministically generated
-
READMEs to enable users to replicate performance results
-
code which interfaces with the loadgen
-
<system_desc_id>_<implementation_id>_<scenario>.json
-
<system_desc_id>.json
For some models mlperf_log_accuracy.json can get very large. Because of this we truncate mlperf_log_accuracy.log in submissions using a tool. A submiter will run the tool before submitting to mlperf and keep the original mlperf_log_accuracy.log files inside their organization. The original files might be requested by mlperf during submission review so you need to store them. Run the tool as follows, assuming <SOURCE> is your local subumission tree and <DEST> the location of the github submission repo:
# from top of the inference source tree
python3 tools/submission/truncate_accuracy_log.py --input <SOURCE> --output <DEST>The file <system_desc_id>.json should contain the following metadata describing the system:
Field |
Meaningful response required |
Cloud example |
On-premise example1 |
On-premise example2 |
submitter |
Yes |
David Kanter |
David Kanter |
|
division |
Yes |
closed |
Closed |
Open |
system_type |
Yes |
datacenter |
datacenter |
edge |
status |
Yes |
available |
available |
available |
system_name |
Yes |
tpu-v3 |
8ball |
8ball |
number_of_nodes |
Yes |
1 |
1 |
1 |
host_processors_per_node |
Yes |
1 |
2 |
2 |
host_processor_model_name |
Yes |
Intel Skylake |
Intel Xeon Platinum 8164 |
Intel Xeon Platinum 8164 |
host_processor_core_count |
Yes1, or vcpu |
26 |
26 |
|
host_processor_vcpu_count |
Yes1, or core 1 |
96 |
||
host_processor_frequency |
2000MHz |
2000MHz |
||
host_processor_caches |
L1: 32KB I + 32KB D per core, L2: 1MB I+D per core, L3: 37.75MB I+D per chip |
L1: 32KB I + 32KB D per core, L2: 1MB I+D per core, L3: 37.75MB I+D per chip |
||
host_processor_interconnect |
3x 10.6GT/s UPI |
3x 10.6GT/s UPI |
||
host_memory_capacity |
Yes |
128GB |
384GB |
384GB |
host_storage_type |
Yes |
SSD |
SSD |
SSD |
host_storage_capacity |
Yes |
1 200 GB + 1 50 GB |
800GB |
800GB |
host_networking |
Yes |
Gig Ethernet |
Infiniband |
|
host_network_card_count |
Yes |
1 100Gbe + 1 10Gbe |
1 Integrated |
|
host_networking_topology |
Yes |
N/A |
N/A |
|
host_memory_configuration |
Yes |
12 x 32GB 2Rx4 PC4-2666V-R |
12 x 32GB 2Rx4 PC4-2666V-R |
|
accelerators_per_node |
Yes |
16 |
4 |
4 |
accelerator_model_name |
Yes |
tpu-v3 |
Nvidia Tesla V100 |
Nvidia Tesla V100 |
accelerator_host_interconnect |
Yes |
PCIe 3.0 x16 |
PCIe 3.0 x16 |
|
accelerator_frequency |
1230MHz |
1230MHz |
||
accelerator_on-chip_memories |
L1: 80x 128KB, L2: 6MB per chip |
L1: 80x 128KB, L2: 6MB per chip |
||
accelerator_memory_configuration |
Yes |
HBM |
HBM2 |
HBM2 |
accelerator_memory_capacity |
Yes |
32 GB |
32GB |
32GB |
accelerator_interconnect |
Yes |
6x 25GT/s NVLink |
6x 25GT/s NVLink |
|
accelerator_interconnect_topology |
Direct |
Mesh |
||
cooling |
Yes |
Liquid |
Air-cooled |
|
hw_notes |
I overclocked it! |
Miscellaneous notes |
||
framework |
Yes |
TensorFlow 1.14 commit hash = faf9db515c4bf550daacc1c3a22fedf3ff5dde63 |
PyTorch, NGC19.05 |
PyTorch, NGC19.05 |
other_software_stack |
Yes |
TPU stack 1.14.1.dev20190518, python 3.6, sacrebleu 1.2.11 |
cuda 10.2.0.163, cudnn 7.6.0.64, cublas 10.2.0.163, gcc 5.4.0 |
cuda 10.2.0.163, cudnn 7.6.0.64, cublas 10.2.0.163, gcc 5.4.0 |
operating_system |
Yes |
Ubuntu 16.04 |
Ubuntu 18.04.1 LTS |
Ubuntu 18.04.1 LTS |
sw_notes |
extra notes here |
extra notes here |
1 Optional for preview system submission. These fields must be updated in the system description json upon the public availability of the processor.
In the Network division for the inference datacenter the file <system_desc_id>.json should also contain:
Field |
Example |
is_network |
True |
network_type |
Ethernet |
network_media |
Copper |
network_rate |
100G |
nic_loadgen |
NVIDIA CX7 |
number_nic_loadgen |
1 |
net_software_stack_loadgen |
Linux Kernel TCP stack v.XXX |
network_protocol |
TCP/IPv4 over Ethernet |
number_connections |
1 |
nic_sut |
NVIDIA CX7 |
number_nic_sut |
1 |
net_software_stack_sut |
Linux Kernel TCP stack v.XXX |
network_topology |
Loadgen System connected to SUT through Switch and Load Balancer |
The file <system_desc_id>_<implementation_id>.json should contain metadata describing use of the specified implementation on the specified system.
Field |
Meaningful response required |
DK_Example_1 |
DK_Example_2 |
Starting weights filename? |
Yes |
https://zenodo.org/record/2269307/files/mobilenet_v1_1.0_224.tgz |
https://zenodo.org/record/2269307/files/mobilenet_v1_1.0_224.tgz |
Weight transformations? |
Yes |
No |
Yes (URL_to_calibration_writeup) |
Weight data type(s) |
Yes |
fp32 |
bf16 |
Input data type(s) |
Yes |
fp32 |
bf16 |
Retraining |
Yes |
No |
Yes (URL_to_writeup) |
For Training, the results logs must be verified and stamped by the training log verification script [TODO log]. The easiest way to produce such a log is to use the
For Inference, the results logs must have been produced by the [standard load generator](https://github.com/mlperf/inference/tree/master/loadgen). Power information may be appended using the standard power information appending script [TODO link or remove].
The following section applies to all submissions in all divisions.
The source code must be sufficient to reproduce the results of the submission, given all source components specified in Section 5.11 (for Inference) or Section 5.12 (for Training) are provided in the submission repo for all Categories, including Available, Preview, and RDI. In addition, any software component that would be required to substantially reproduce the submission must be uniquely identified using one of the following methods:
Possible methods to provide Software (meet at least 1 criteria) |
Methods for replication |
"Available" Category |
"Preview" Category |
"RDI" Category |
Source code or binary included in the submission repo |
--- |
Yes |
Optional |
Optional |
Depends only on public Github repo |
Commit hash or tag |
Yes |
Optional |
Optional |
Depends only on public Github repo plus one or more PRs |
Commit hash or tag, and PR number(s) |
Yes |
Optional |
Optional |
Depends only on an available binary (could be free to download or for purchase / customers only) |
Name and version, or url |
Yes, if the binary is a Beta or Production release |
Optional |
Optional |
Depends on private source code from an internal source control system |
Unique source identifier [i.e., gitlab hash, p4 CL, etc] |
No |
Yes. Should be made "Available" in the next submission after 140 days of the submission date, or by the next MLPerf submission date, whichever is longer |
Yes |
Depends on partially redacted source code from an internal source control system (line numbers logged in result files should comply with redacted source code for easy review) |
Unique source identifier [i.e., gitlab hash, p4 CL, etc] |
No |
Yes. Should be made "Available" in the next submission after 140 days of the submission date, or by the next MLPerf submission date, whichever is longer |
Yes |
Private binary |
Checksum |
No |
Yes. Should be made "Available" in the next submission after 140 days of the submission date, or by the next MLPerf submission date, whichever is longer |
Yes |
The following section applies to all submissions in the Closed and Network divisions. We encourage Open division submissions to be as transparent as possible.
For inference, the source code, pseudo-code, or prose description must be sufficient to determine:
-
Readme detailing run command with command line flags, if any
-
The connection to the loadgen
-
Preprocessing
-
The architecture of the model, and the operations performed
-
Weights (please notify results chair if > 2 GB combined)
-
Weight transformations
-
If weight transformations are non-deterministic, then any randomness seeds used must be included in the submission.
-
For the inference server scenario, the source code, pseudo-code, or prose must be sufficient to determine:
-
Online batching, meaning how the server batches queries for processing
For training, the source code must be sufficient to verify all aspects of a Closed submission including but not limited to:
-
Readme detailing run command with command line flags, if any
-
Data preprocessing
-
Data traversal order
-
Model
-
Model initialization
-
Optimizer used
-
Hyperparameters used
-
Evaluation frequency
-
Evaluation method
This requirement applies even to Open submissions, though the aspects do not need to match the reference.
Submitters must run the compliance tests for their closed and network divisions submissions to verify that their submission achieves a basic level of compliance with a subset of the MLPerf rules. If compliance testing identifies a potential issue with the submission, the onus is on the submitter to provide an adequate explanation to the results review committee.
Refer to the documentation found under https://github.com/mlperf/inference/tree/master/compliance/nvidia
The following compliance tests are required for each of the folliwing benchmarks:
model |
Required Compliance Tests |
resnet50-v1.5 |
TEST01, TEST04, TEST05 |
retinanet 800x800 |
TEST01, TEST05 |
bert |
TEST01, TEST05 |
dlrm-v2 |
TEST01, TEST05 |
3d-unet |
TEST01, TEST05 |
rnnt |
TEST01, TEST05 |
gpt-j |
- |
stable-diffusion-xl |
- |
Llama2-70b |
TEST06 |
During the review process, only certain groups are allowed to inspect results and code.
Group |
Can Inspect |
Review committee |
All results, all code |
Submitters |
All results, all code |
Public |
No results, no code |
Each submitter is required to review at least one other submission. Required reviews are assigned as follows:
-
Stack rank submissions by number of results.
-
Assign reviewers in pairs walking down the stack rank
-
If an odd number of reviewers, the bottom 3 in the stack rank will review each other.
Submitters must officially file objections to other submitter’s code by creating a GitHub issue prior to the “Filing objections” deadline that cites the offending lines, the rules section violated, and, if pertinent, corresponding lines of the reference implementation that are not equivalent.
Each submitter must file objections with a “by <org>” tag and a “against <org>” tag. Multiple organizations may append their “by <org>” to an existing objection if desired. If an objector comes to believe the objection is in error they may remove their “by <org>” tag. All objections with no “by <org>” tags at the end of the filing deadline will be closed.
Submitters should file an objection, then discuss with the submitter to verify if the objection is correct. Following filing of an issue but before resolution, both objecting submitter and owning submitter may add comments to help the review committee understand the problem.
If the owning submitter acknowledges the problem, they may append the “fix_required” tag and begin to fix the issue.
The review committee will review each objection, and either establish consensus or vote. If the committee votes to support an objection, it will provide some basic guidance on an acceptable fix and append the “fix_required” tag. If the committee votes against an objection, it will close the issue.
Code should be updated via a pull request prior to the “fixing objections” deadline. Following submission of all fixes, the objecting submitter should confirm that the objection has been addressed with the objector(s) and ask them to remove their “by <org> tags.
If the objector is not satisfied by the fix, then the review committee will decide the issue at its final review meeting. The review committee may vote to accept a fix and close the issue, or reject a fix and request the submission be moved to open or withdrawn.
Hyperparameters may be updated in accordance with the training rules prior to the final code due date.
MLCommons will publish all results simultaneously via an update to the results page. After publication, code and results are public and free for use under the MLPerf Terms of Use.
For Inference, datacenter, there will be three results table published, one for Closed, one for Network and one for Open. Otherwise, there will be two results table published, one for Closed and one for Open.
Each results table will contain the following information:
Field |
Description |
TBD |
TBD |
Results will be divided into categories based on the availability of the hardware and software components. Availability rules apply to Closed, Network and Open division submissions.
Category |
Hardware |
Software |
Available in cloud |
Available for rent in the cloud |
Available |
Available on premise |
Available for purchase |
Available |
Preview |
Must be available for rent or purchase in time for the next submission or in the next submission after 140 days whichever is longer |
Available except for software required to support substantially new hardware |
Research, Development, or Internal |
Does not meet the above requirements |
Does not meet the above requirements |
Available cloud systems must (1) have available pricing (either publicly advertised or available by request), (2) have been rented by at least one third party, (3) have public evidence of availability (web page saying product is available, statement by company, etc), and (4) be “reasonably available” for rent by additional third parties by the submission date.
An on-premise system is Available if all of its components that substantially determine ML performance are Available either individually or in aggregate (development boards that meet the substantially determine clause are allowed). An Available component or system must (1) have available pricing (either publicly advertised or available by request), (2) have been shipped to at least one third party, (3) have public evidence of availability (web page saying product is available, statement by company, etc), and (4) be “reasonably available” for purchase by additional third parties by the submission date. In addition, submissions for on-premise systems must describe the system and its components in sufficient detail to enable third parties to build a similar system.
In both cases, “reasonably available” means:
-
Supply and lead times are appropriate for system scale, i.e. on-demand and in quantity for the smallest systems and a few months and with limited supply for the largest systems.
-
Access to rent or purchase may be subject to conditions that are common to generally available products (such as financial qualifications, size of customer, support burden, export restrictions, etc.) but is not otherwise restricted (i.e. no “early access” approval requirements).
However, it is allowed for the qualifying pre-submission rentals/purchases to have been made with restrictions such as “early access” approval.
Available systems must use an Available software stack. A software stack consists of the set of software components that substantially determine ML performance but are not in the uploaded source code. For instance, for training this includes at a minimum any required ML framework (e.g. TensorFlow, pyTorch) and ML accelerator library (e.g. cuDNN, MKL). An Available software stack consists of only Available software components.
An Available software component must be well supported for general use. For open source software, the software may be based on any commit in an "official" repo plus optionally any PRs to support a particular architecture. For binaries, the binary must be made available as release, or as a "beta" release with the requirement that optimizations will be included in a future "official" release. The beta must be made available to customers as a clear part of the release sequence. The software must be available at the time of submission.
A Preview system is a system which did not qualify as an Available system as of the previous MLPerf submission date, but will qualify in the next submission after 140 days of the current submission date, or by the next MLPerf submission date, whichever is more, and which the submitter commits to submitting as an Available system by that time. If it is not submitted in that submission round with equal or better performance (allowing for noise), the Preview benchmark will be marked as invalid. A Preview submission must include performance on at least one benchmark which will be considered MLPerf Compatible (see the MLPerf Compatibility Table) in the upcoming round where transition to Available is made (consult SWG for Benchmark Roadmap). On each of the benchmarks that are previewed and are Compatible, the Available submission must show equal or better performance (allowing for noise, for any changes to the benchmark definition) on all systems for Inference and across at least the smallest and the largest scale of the systems used for Preview submission on that benchmark for Training (e.g. Available Training submissions can be on scales smaller than the smallest and larger than the largest scale used for Preview submission). For submissions accompanied by power measurements, "equal or better" must use power-normalized performance rather than absolute performance.
-
Training: For an Available system that is larger than the Preview system, absolute performance must be better. For an Available system that is smaller than the Preview system, efficiency (time-to-train * number of chips) must be better.
If none of the Preview benchmarks are MLPerf Compatible in the upcoming round where transition to Available is made in a rare event, a submitter may get their performance validated in the upcoming round by making a submission on the old/retired benchmark to the Results WG during review period (such a submission will not show up on the Results table but will only be used by the Results WG to validate a past Preview Submission).
For a Preview submission only, the "Available software stack" requirement is waived for software that is necessary to support newly developed hardware component(s) that are substantial contributors to the determination of ML performance (e.g. a new ML accelerator or CPU or NIC). A "newly developed" component is one that was not Available as of the submission date of the previous MLPerf submission round, and was not submitted in a Preview system in that previous round. Other parts of the software stack must still meet the same Available software stack requirements as an Available system.
Examples and counterexamples:
-
All SKUs of a new chip can be considered "newly developed" as long as the first shipping SKU qualifies as "newly developed". Once the first shipping SKU no longer qualifies, no existing or future SKUs of the chip can be considered "newly developed".
-
A chip that was Available prior to the submission date of the previous MLPerf round but was never used before for an MLPerf submission does not qualify as "newly developed."
-
At this point in time a hardware component that is not an ML accelerator, CPU, or NIC, is presumed to not meet the "substantial contributor to the determination of ML performance" criteria. Other possible cases must be brought to the relevant working group for consideration.
A research, development, or internal (RDI) component does not meet the requirements for an available or preview component. An RDI system is a system containing one or more RDI components. The RDI components may not be submitted as Available components until the submission cycle after next or 221 days whichever is longer.
Any use of published results in connection with the MLPerf trademark must follow the MLPerf Results Messaging Guidelines and any relevant policies found at https://mlcommons.org/en/policies/.
Results posted on mlperf.org have been generated from a non-compliant submission, and the fix results in >5% cumulative reduction in performance.
Any MLCommons member may raise an objection to any published results via email to any MLCommons WG chair. An objection review committee (minimally four MLPerf chairs) will screen the objection. If rejected at this stage, the committee chair will respond to the objector with the reasoning.
Otherwise, the committee will designate an investigator with no conflict of interest to produce a brief (e.g. 1 page) report confidential to the committee, which will include a response from the submitter of the disputed result. Based on the report, the committee will respond to the objector or start further investigation on a case-by-case basis.
The appendices contain additional information.