network/linux-bridge #211
giscus[bot]
bot
Replies: 7 comments 3 replies
-
|
“宿主机根据路由规则再送至 VETP 设备或者 TUN 设备封装成一个新的数据包”，这里VETP应该打错了是VETH吧。 |
Beta Was this translation helpful? Give feedback.
-
|
这儿单词打错，是 VTEP（VXLAN Tunnel End Points），VXLAN 通信里面的设备。 这块写得不清楚，我再重新改改。 |
Beta Was this translation helpful? Give feedback.
-
|
This is an automatic reply, confirming that your e-mail was received.Thank you ! !Plus_Jia
|
Beta Was this translation helpful? Give feedback.
-
将 veth 另一端连接到 br0$ ip link set dev veth0 master br0 |
Beta Was this translation helpful? Give feedback.
-
|
谢谢，已修改 |
Beta Was this translation helpful? Give feedback.
-
|
网络命名空间名ns1/ns2和net1/net2混用了，3.5.3节也有这个问题 |
Beta Was this translation helpful? Give feedback.
-
|
谢谢，看来我还得再抽精力仔细校对一遍 |
Beta Was this translation helpful? Give feedback.
-
|
需要添加两个语句，将veth1与veth3(桥接到br0的接口) 设置为up, ip link set veth1 up ; ip link set veth3 up; 否则的话 br0的状态处于DOWN(因为接口都是Down) |
Beta Was this translation helpful? Give feedback.
-
|
This is an automatic reply, confirming that your e-mail was received.Thank you ! !Plus_Jia
|
Beta Was this translation helpful? Give feedback.
-
network/linux-bridge
构建大规模高可用的分布式系统
https://www.thebyte.com.cn/network/linux-bridge.html
Beta Was this translation helpful? Give feedback.
All reactions