diff --git a/common/src/main/res/values-de/strings.xml b/common/src/main/res/values-de/strings.xml
index d5576c3a8d..ed1b817527 100644
--- a/common/src/main/res/values-de/strings.xml
+++ b/common/src/main/res/values-de/strings.xml
@@ -2269,13 +2269,13 @@
Sperrbildschirm des Geräts
Dieser Parameter aktiviert/deaktiviert den Sperrbildschirm des Geräts. Bei der Einstellung „Aus” wird der Sperrbildschirm nicht angezeigt, wenn der Bildschirm eingeschaltet wird.
Setting \"Screen timeout\" in the system (by profile activation) does not disable \"Keep screen on\". You also need to configure \"Keep Screen On\" to \"Off\" if you want \"Screen Timeout\" to work on the system.
- Screen On/Off
- \"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".
- for switch screen on/off
- When \"Screen On/Off\" is configured, \"Device lock screen\" is disabled and vice versa. Is not possible to configure both.
- Shizuku is installed, but not running. Please open Shizuku and start it from its application.
- Open
- Help
- This parameter is for \"Call event\"=\"Missed call\".
- \"Light\" is ambient light detected by Light device sensor.
+ Bildschirm Ein/Aus
+ „Bildschirm einschalten” ist „Ein”. Um es auf „Aus“ zu stellen, konfigurieren und aktivieren Sie das Profil mit „Bildschirm einschalten“=„Aus“.
+ zum Ein- und Ausschalten des Bildschirms
+ Wenn „Bildschirm Ein/Aus“ konfiguriert ist, ist „Gerätesperrbildschirm“ deaktiviert ist und umgekehrt. Es ist nicht möglich, beides zu konfigurieren.
+ Shizuku ist installiert, wird aber nicht ausgeführt. Bitte öffnen Sie Shizuku und starten Sie es aus seiner Anwendung.
+ Öffnen
+ Hilfe
+ Dieser Parameter ist für „Anrufereignis“=„Entgangener Anruf“.
+ „Licht“ ist das vom Lichtsensor des Geräts erfasste Umgebungslicht.
diff --git a/common/src/main/res/values-es/strings.xml b/common/src/main/res/values-es/strings.xml
index 76f84e6cb1..8865c5309c 100644
--- a/common/src/main/res/values-es/strings.xml
+++ b/common/src/main/res/values-es/strings.xml
@@ -2270,7 +2270,7 @@
Este parámetro activa o desactiva la pantalla de bloqueo del dispositivo. Cuando esté desactivada, la pantalla de bloqueo no aparecerá cuando la pantalla está encendida.
La configuración de \"Tiempo de espera de pantalla\" en el sistema (por activación de perfil) no desactiva \"Mantener pantalla encendida\". También necesitarás configurar \"Mantener la pantalla encendida\" comop \"Apagado\" si deseas que \"Tiempo de espera de pantalla\" funcione.
Pantalla encendida/apagada
- \"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".
+ \"Mantener la pantalla encendida\" es \"Activado\". Para desactivarla, configure y active el perfil con \"Mantener la pantalla encendida\"=\"Desactivado\".
para encender/apagar la pantalla
Cuando se configura \"Encendido o Apagado\", \"Pantalla de bloqueo de dispositivo\" se desactiva, y viceversa. No es posible configurar ambos.
Shizuku está instalado, pero no se está ejecutando. Por favor, abre Shizuku e inícialo.
diff --git a/common/src/main/res/values-fr/strings.xml b/common/src/main/res/values-fr/strings.xml
index f47b9e7aba..62abba0882 100644
--- a/common/src/main/res/values-fr/strings.xml
+++ b/common/src/main/res/values-fr/strings.xml
@@ -2269,13 +2269,13 @@
Écran de verrouillage de l\'appareil
Ce paramètre active ou désactive l\'écran de verrouillage de l\'appareil. Lorsque la valeur est désactivée, l\'écran de verrouillage n\'apparaîtra pas lorsque l\'écran est allumé.
Le réglage « Délai d\'attente de l\'écran » dans le système (par activation du profil) ne désactive pas « Garder l\'écran allumé ». Vous devez également configurer « Garder l\'écran allumé » à « Éteint » si vous voulez que « Délai d\'attente de l\'écran » fonctionne sur le système.
- Screen On/Off
- \"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".
- for switch screen on/off
- When \"Screen On/Off\" is configured, \"Device lock screen\" is disabled and vice versa. Is not possible to configure both.
- Shizuku is installed, but not running. Please open Shizuku and start it from its application.
- Open
- Help
- This parameter is for \"Call event\"=\"Missed call\".
- \"Light\" is ambient light detected by Light device sensor.
+ Écran Allumé/Éteint
+ \"Garder l\'écran allumé\" est \"Activé\". Pour le désactiver, configurez et activez le profil avec \"Garder l\'écran allumé\"=\"Désactivé\".
+ pour allumer ou éteindre l\'écran
+ Lorsque \"Écran Allumé/Éteint\" est configuré, \"Écran de verrouillage de l\'appareil\" est désactivé et vice versa. Il n\'est pas possible de configurer les deux.
+ Shizuku est installé, mais n\'est pas en cours d\'exécution. Veuillez ouvrir Shizuku et le démarrer à partir de son application.
+ Ouvrir
+ Aide
+ Ce paramètre est pour \"Événement d\'appel\"=\"Appel manqué\".
+ \"Lumière\" est la lumière ambiante détectée par le capteur de luminosité.
diff --git a/common/src/main/res/values-nl/strings.xml b/common/src/main/res/values-nl/strings.xml
index ebe0738ed9..d7b23eafca 100644
--- a/common/src/main/res/values-nl/strings.xml
+++ b/common/src/main/res/values-nl/strings.xml
@@ -2269,13 +2269,13 @@
Apparaat vergrendelscherm
Deze parameter schakelt het vergrendelscherm aan/uit. Wanneer uitgeschakeld wordt het vergrendelscherm niet weergegeven wanneer je het scherm aanzet.
\"Scherm timeout\" instellen in het systeem (bij profiel activering) schakelt \"Scherm aanhouden\" niet uit. Je moet ook \"Scherm ingeschakeld houden\" configureren als je \"Scherm Timeout\" wilt gebruiken om aan het systeem te werken.
- Screen On/Off
- \"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".
- for switch screen on/off
- When \"Screen On/Off\" is configured, \"Device lock screen\" is disabled and vice versa. Is not possible to configure both.
- Shizuku is installed, but not running. Please open Shizuku and start it from its application.
+ Scherm aan/uit
+ \"Scherm aan\" is \"Aan\". Om \"Uit\" in te stellen, configureer en activeer je profiel met \"Scherm aan\"=\"Uit\".
+ voor inschakelen van scherm aan/uit
+ Wanneer \"Scherm Aan/Uit\" is geconfigureerd, is \"Apparaat vergrendelingsscherm\" uitgeschakeld en vice versa. Het is niet mogelijk om beide te configureren.
+ Shizuku is geïnstalleerd, maar werkt niet. Open Shizuku en start het vanuit de applicatie.
Open
Help
- This parameter is for \"Call event\"=\"Missed call\".
- \"Light\" is ambient light detected by Light device sensor.
+ Deze parameter is voor \"Oproep event\"=\"Gemiste oproep\".
+ \"Licht\" is omgevingslicht gedetecteerd door de sensor van het lichtsensor.
diff --git a/common/src/main/res/values-ru/strings.xml b/common/src/main/res/values-ru/strings.xml
index a37919af3c..ebcc9e7b65 100644
--- a/common/src/main/res/values-ru/strings.xml
+++ b/common/src/main/res/values-ru/strings.xml
@@ -2269,13 +2269,13 @@
Экран блокировки устройства
Этот параметр включает/отключает экран блокировки устройства. Когда установлено значение \"Выкл.\", экран блокировки при включённом экране появляться не будет.
Задание \"Времени таймаута экрана\" в системе (при активации профиля) не отключает настройку \"Не выключать экран\". Если вы хотите, чтобы \"Время таймаута экрана\" работало, нужно также отключить \"Не выключать экран\".
- Screen On/Off
- \"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".
- for switch screen on/off
- When \"Screen On/Off\" is configured, \"Device lock screen\" is disabled and vice versa. Is not possible to configure both.
- Shizuku is installed, but not running. Please open Shizuku and start it from its application.
- Open
- Help
- This parameter is for \"Call event\"=\"Missed call\".
- \"Light\" is ambient light detected by Light device sensor.
+ Включение/выключение экрана
+ Параметр \"Не выключать экран\" включён. Чтобы отключить его, настройте и активируйте профиль, в котором он выключен.
+ для включения/выключения экрана
+ Когда задано \"Включение/выключение экрана\", \"Экран блокировки устройства\" недоступен, и наоборот. Невозможно задать и то, и другое.
+ Shizuku установлен, но не запущен. Пожалуйста, откройте Shizuku и запустите его из его приложения.
+ Открыть
+ Справка
+ Этот параметр - для \"Состояние и тип вызова\"=\"Пропущенный вызов\".
+ \"Освещённость\" - это окружающий свет, определяемый датчиком освещённости устройства.
diff --git a/common/src/main/res/values-uk/strings.xml b/common/src/main/res/values-uk/strings.xml
index 4dca4ce09d..02c7007231 100644
--- a/common/src/main/res/values-uk/strings.xml
+++ b/common/src/main/res/values-uk/strings.xml
@@ -2220,22 +2220,22 @@
профіль - помилка при відправці SMS
Надіслати SMS
Текст SMS
- for read contacts, detect ringing call (for \"night call\"), send SMS in Call sensor
+ для читання контактів, виявлення дзвінка (для \"нічний виклик\"), надсилання SMS в датчику викликів
Сповіщення
Очистити сповіщення
Будь ласка, увімкніть \"Доступ до сповіщень\". Без цього очищення сповіщень не буде працювати.
Очистити сповіщення
- for read contacts in profile parameter \"Clear notifications\"
+ для читання контактів у параметрі профілю \"Очистити сповіщення\"
Застосунки:
Групи контактів:
Контакти:
Текст
- Contacts for profile parameter \"Clear notifications\"
+ Контакти для параметра профілю \"Очистити сповіщення\"
Тел. номерів немає в контактах
Заблокований виклик
тел. номер:
WARNING: This parameter allows block of calls. Notification about blocked calls will not be displayed!\nBut the blocked tel. numbers are logged in the \"Activity log\", which enables calling back to blocked tel. number by clicking on this log line.
- Entire log
+ Журнал повністю
Заблоковані виклики
Помилки
Початок подій
@@ -2265,9 +2265,9 @@
Тон
Стрілка вправо
Стрілка вліво
- [ Not set ]
- Device lock screen
- This parameter switches On/Off the device lock screen. When set to Off, the lock screen will not appear when the screen is turned on.
+ [ Не вказано ]
+ Екран блокування
+ Цей параметр вмикає/вимикає екран блокування пристрою. Коли встановлено на \"Вимкнено\" - екран блокування не з\'являється при увімкненні екрану.
Setting \"Screen timeout\" in the system (by profile activation) does not disable \"Keep screen on\". You also need to configure \"Keep Screen On\" to \"Off\" if you want \"Screen Timeout\" to work on the system.
Screen On/Off
\"Keep screen on\" is \"On\". To set it \"Off\", configure and activate profile with \"Keep screen on\"=\"Off\".