Makefile.common

# include Makefile

#This file is included in the general Makefile, the libs Makefile and the src Makefile
#Different optimize settings for library and source files can be realized by using arguments
#Compiler optimize settings:
# -O0 no optimize, reduce compilation time and make debugging produce the expected results (default).
# -O1 optimize, reduce code size and execution time, without much increase of compilation time.
# -O2 optimize, reduce code execution time compared to ‘O1’, increase of compilation time.
# -O3 optimize, turns on all optimizations, further increase of compilation time.
# -Os optimize for size, enables all ‘-O2’ optimizations that do not typically increase code size and other code size optimizations.
#Recommended optimize settings for release version: -O3
#Recommended optimize settings for debug version: -O0
#Valid parameters :
# OptLIB=0 --> optimize library files using the -O0 setting
# OptLIB=1 --> optimize library files using the -O1 setting
# OptLIB=2 --> optimize library files using the -O2 setting
# OptLIB=3 --> optimize library files using the -O3 setting
# OptLIB=s --> optimize library files using the -Os setting
# OptSRC=0 --> optimize source files using the -O0 setting
# OptSRC=1 --> optimize source files using the -O1 setting
# OptSRC=2 --> optimize source files using the -O2 setting
# OptSRC=3 --> optimize source files using the -O3 setting
# OptSRC=s --> optimize source files using the -Os setting
# all --> build all
# libs --> build libs only
# src --> build src only
# clean --> clean project
# tshow --> show optimize settings
#Example:
# make OptLIB=3 OptSRC=0 all tshow

TOP=$(shell greadlink -f "$(dir $(lastword $(MAKEFILE_LIST)))")
PROGRAM=main
LIBDIR=$(TOP)/libs

#Adust the following line to the library in use
STMLIB=$(LIBDIR)/STM32_USB-FS-Device_Lib_V4.0.0/Libraries
#Adjust TypeOfMCU in use, see CMSIS file "stm32f10x.h"
#STM32F103RBT (128KB FLASH, 20KB RAM) --> STM32F10X_MD
#TypeOfMCU=STM32F10X_MD
#STM32F103RET (512KB FLASH, 64KB RAM) --> STM32F10X_HD
#STM32F103ZET (512KB FLASH, 64KB RAM) --> STM32F10X_HD
#============================================================================#
TypeOfMCU=STM32F10X_HD
#============================================================================#

TC=arm-none-eabi
CC=echo "CC $@";$(TC)-gcc
LD=echo "LD $@";$(TC)-ld -v
OBJCOPY=$(TC)-objcopy
OBJDUMP=$(TC)-objdump
AR=echo "AR $@";$(TC)-ar
GDB=$(TC)-gdb
INCLUDE=-I$(TOP)/inc
INCLUDE+=-I$(STMLIB)/CMSIS/Include
INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F10x/Include
INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F10x/Source/Templates
INCLUDE+=-I$(STMLIB)/STM32F10x_StdPeriph_Driver/inc
INCLUDE+=-I$(STMLIB)/STM32_USB-FS-Device_Driver/inc
INCLUDE+=-I$(LIBDIR)/module
COMMONFLAGS=-g -mcpu=cortex-m3 -mthumb -std=c99
COMMONFLAGSlib=$(COMMONFLAGS)
#Commands for general Makefile and src Makefile
ifeq ($(OptSRC),0)
	COMMONFLAGS+=-O0
	InfoTextSrc=src (no optimize, -O0)
else ifeq ($(OptSRC),1)
	COMMONFLAGS+=-O1
	InfoTextSrc=src (optimize time+ size+, -O1)
else ifeq ($(OptSRC),2)
	COMMONFLAGS+=-O2
	InfoTextSrc=src (optimize time++ size+, -O2)
else ifeq ($(OptSRC),s)
	COMMONFLAGS+=-Os
	InfoTextSrc=src (optimize size++, -Os)
else
	COMMONFLAGS+=-O3
	InfoTextSrc=src (full optimize, -O3)
endif
CFLAGS+=$(COMMONFLAGS) -Wall -Werror $(INCLUDE)
CFLAGS+=-D $(TypeOfMCU)
CFLAGS+=-D VECT_TAB_FLASH

#Commands for libs Makefile
ifeq ($(OptLIB),0)
	COMMONFLAGSlib+=-O0
	InfoTextLib=libs (no optimize, -O0)
else ifeq ($(OptLIB),1)
	COMMONFLAGSlib+=-O1
	InfoTextLib=libs (optimize time+ size+, -O1)
else ifeq ($(OptLIB),2)
	COMMONFLAGSlib+=-O2
	InfoTextLib=libs (optimize time++ size+, -O2)
else ifeq ($(OptLIB),s)
	COMMONFLAGSlib+=-Os
	InfoTextLib=libs (optimize size++, -Os)
else
	COMMONFLAGSlib+=-O3
	InfoTextLib=libs (full optimize, -O3)
endif
CFLAGSlib+=$(COMMONFLAGSlib) -Wall -Werror $(INCLUDE)
CFLAGSlib+=-D $(TypeOfMCU)
CFLAGSlib+=-D VECT_TAB_FLASH