OpenQuake Engine 3.16.4

[Antonio Ettorre (@vot4anto)]

• Upgraded Django version to version 3.2.19 with some security fixes

[Claudio Schill (@claudio525)]

• Fixed sorting bug in the sigma_mu adjustment factor in
  the Kuehn et al. (2020) GMM

[Graeme Weatherill (@g-weatherill)]

• Fixes to bchydro_2016_epistemic, eshm20_craton and lanzano_2019

[Marco Pagani (@mmpagani)]

• Fixed bug in get_profiles_from_simple_fault_data affecting KiteSurfaces

[Michele Simionato (@micheles)]

• Fixed tau-phi inversion in LanzanoLuzi2019
• Fixed shakemap calculations to take the risk IMTs and not the hazard IMTs
• Removed sorting of the sections in the multiFaultSource reader to keep
  the rup_idxs consistent with the order in the files
• GMFs too small to produce losses now give a warning rather than an error
• Fixed a subtle filtering bug breaking conditioned GMFs
• Fixed bug in get_ry0_distance breaking conditioned GMFs
• Fixed the rupture exporter in presence of GMPETables
• Fixed severe bug affecting the classical tiling calculator
• Fixed rounding bug in disaggregation (in the line
  [mag] = np.unique(np.round(ctx.mag, 6)))
• Fixed the error message for wrong weights in the gsim logic tree file

OpenQuake Engine 3.16.3

[Kendra Johnson (@kejohnso)]

• Fixed a bug in hazardlib.geo.surface.multi affecting the disaggregation

[Michele Simionato (@micheles)]

• Fixed the damage state header in the aggrisk outputs
• Fixed the realizations extractor for scenario calculations starting from
  ruptures with multiple different tectonic region types
• Fixed a subtle mutability bug affecting various GMPEs
• Fixed rupture sampling in the case of a same source appearing in multiple
  logic tree branches
• Fixed a bug in classical_damage causing a ValueError: could not broadcast
  input array from shape (X,Y) into shape (X,) in some situations
• Fixed the CSV importer so that it can import exported GMFs even in
  the presence of a custom_site_id

OpenQuake Engine 3.16.2

[Michele Simionato (@micheles)]

• Fixed a bug in extract_agg_curves affecting the QGIS plugin
• Fixed a bug in scenario calculations causing a mysterious IndexError in the
  line rctx.clon = c.lons[rctx.sids]

[Marco Pagani (@mmpagani), Michele Simionato (@micheles)]

• Fixed a bug in the source writer when writing NonParametricSources
• Removed the conditional spectrum calculator (it was experimental and
  not working properly in many cases)

[Michele Simionato (@micheles)]

• Now we log only when the DB schema is really upgraded
• Fixed the documentation about extracting hazard curves and maps
• Fixed KeyError in calculations using the EasternCan15Mid with PGA
• The minimum_magnitude parameter was ignored for multiFault sources
• Replaced hard-coded limit to 25 levels in the MRD postprocessor
  with a simple warning
• Fixed bug in oq zip: when starting from a directory different from the
  job.ini directory, .hdf5 files for nonparametric ruptures were not included
• Fixed a 32 bit / 64 bit bug in the hinge function of Kuehn et al. (2020)
• Forbidden source IDs with dots (".")

OpenQuake Engine 3.16.1

[Michele Simionato (@micheles)]

• Fixed event based calculations running out of memory due to hazard curve
  arrays being instantiated without need
• Sampling the ruptures was raising a BlockingIOError sometimes

[Kendra Johnson (@kejohnso)]

• Fixed bug in extendModel with multiple branchsets

OpenQuake Engine 3.16.0

[Matteo Nastasi (@nastasi-oq)]

• Bumped oq-libs to version 3.8.0

[Michele Simionato (@micheles), Paolo Tormene (@ptormene)]

• Fixed the agg_curves extractor to also extract individual curves, thus
  fixing the QGIS plugin visualization

[Michele Simionato (@micheles)]

• Optimized the rupture sampling for MultiFaultSources
• Supported collect_rlzs together with disagg_by_src to avoid running
  out of memory in models with many realizations and many sources

[Marco Pagani (@mmpagani)]

• Implemented the correction of Lanzano et al. (2019) as described in
  Lanzano et al. (2022)

[Michele Simionato (@micheles)]

• Fixed disaggregation calculations when too few tasks were generated

[Anirudh Rao (@raoanirudh), Michele Simionato (@micheles)]

• Changed the algorithm used in classical_risk and classical_bcr
  calculations to take into account the risk_investigation_time

[Michele Simionato (@micheles)]

• Added a warning for pointlike sources with magnitudes >= 8
• Optimized the disaggregation by using our own truncnorm_sf function and
  not scipy

[Anirudh Rao (@raoanirudh)]

• Implemented Conditioned GMFs as defined in Engler et al. (2022)

[Matteo Nastasi (@nastasi-oq)]

• Removed python3-engine-master and python3-engine-worker ubuntu packages

[Michele Simionato (@micheles)]

• Internal: renamed rup_id -> seed in event based calculations to avoid
  confusion
• Parallelized the reinsurance calculation

[Marco Pagani (@mmpagani)]

• Completed implementation of grp_probability for SourceGroups with mutex
  ruptures

[Michele Simionato (@micheles)]

• Huge improvement of the task distribution when using zmq; also, used
  less memory on the master node
• Fixed context collapsing in the multi-site case
• Optimised postclassical, both in terms of memory in the master node
  and reading performance in the workers
• Added parallel.multispawn facility in oq engine --multi --run
• Improved oq engine --multi to run at most 5 jobs at the time
• Fixed bug introduced in engine 3.9 producing wrong numbers in the case of
  mutex ruptures (i.e. the New Madrid cluster in the USA model)
• Added --venv option to the universal installer to install in custom places
• Bug fix: the avg_losses-rlzs output in classical risk was stored
  incorrectly
• Speed up preclassical calculations in presence of complex fault sources and
  similar; for instance there is a 3x speedup for the SAM model

[Trevor Allen (@treviallen)]

• Added class Allen2012_SS14 to Allen (2012) GMM to incorporate Vs30 scaling
  based on Seyhan & Stewart (2014) amplification factors
• Added classes SomervilleEtAl2009NonCratonic_SS14 and
  SomervilleEtAl2009YilgarnCraton_SS14 to Somerville et al (2009) GMM to
  incorporate Vs30 scaling based on Seyhan & Stewart (2014) amplification
  factors
• Added Allen (2022) GMM for Banda Sea earthquakes observed in the North
  Australian Craton

[Michele Simionato (@micheles)]

• Moved the horiz_comp_to_geom_mean functionality from the gsim logic tree
  to the job.ini
• Optimized the parsing of XML files (35x for the Alaska model)
• Bug fix: ModifiableGMPEs with underlying tables were not receiving a
  single magnitude when calling the compute method
• Rewritten ModifiableGMPE to avoid a subtle memory leak

[Matteo Nastasi (@nastasi-oq)]

• Add WEBUI_PATHPREFIX variable to add a prefix to usual webui web path

[Michele Simionato (@micheles)]

• Fixed the exporter of avg_losses-stats when using collect_rlzs=true
• Mitigate the issue of ultra-long planar ruptures affecting many models
• Forced the usage of collect_rlzs for large exposures when computing
  avg_losses with many realizations
• Bug fix: min_mag and max_mag were not honored when using a
  magnitude-dependent maximum distance
• Reduced the memory consumption when using the ps_grid_spacing approximation

[Marco Pagani (@mmpagani)]

• Added a method to compute the mean rate density of two IMTs
• Added the possibility to define the edges of disaggregation bins
• Added a couple of utility methods to the weichert module

[Michele Simionato (@micheles)]

• Introduced automatic tiling for extra-large calculations
• Added command oq purge failed
• Fixed memory leak in the tiling calculator by resetting the ProcessPool
• Fixed an indexing error breaking the GMPE AtkinsonBoore2006 with
  stress drop adjustment

[C. Bruce Worden]

• Extended the AbrahamsonEtAl2014 GMPE to extrapolate the vs30

[Michele Simionato (@micheles)]

• Reduced the number of warnings when the horizontal component is not
  convertible into geometric mean in ModifiableGMPE

[Guillaume Daniel (@guyomd)]

• Added the highest magnitude bin to the Stepp (1972) completeness analysis
  and improved the legend in the plot

[Manuela Villani (@mvillani)]

• Added the Wong et al. (2022) ground motion model

[Marco Pagani (@mmpagani)]

• Added a constant_term attribute to the faultActivityData uncertainty
  model, with a default value of 9.1 for backward compatibility

[Michele Simionato (@micheles)]

• Removed support for Python < 3.8

[Prajakta Jadhav (@Prajakta-Jadhav-25), Dharma Wijewickreme (@Dharma-Wijewickreme)]

• Added GMPE for Zhang and Zhao(2005)

[Michele Simionato (@micheles)]

• Added conditional spectrum calculator in hazardlib
• Fixed the performance report that failed for NGAEast GMPEs
• Reduced the memory consumption in large classical calculations
  (in make_contexts)

[Marco Pagani (@mmpagani), Michele Simionato (@micheles)]

• Fixed the calculation of conditional spectra

[Michele Simionato (@micheles)]

• Corner case bug: in the presence of parent site collection and a child
  site model the engine was associating the site model to the parent
• Strongly reduced the slow tasks and memory consumption in event_based_risk
  calculations and removed the need to keep (a lot of) the gmf_data table
  in memory
• Fixed a performance issue in event based risk calculations, due to the same
  aggregation IDs being computed for each task
• Increased sys.recursionlimit to solve a rare pickling issue and made
  the engine continue even if _csm is not stored
• Added a parameter max_aggregations with a default of 100,000
• Changed the risk calculators to reuse the hazard exposure (if any)

[Antonio Ettorre (@vot4anto)]

• Bumped h5py to version 3.7.0 and added fiona 1.8.21

[Marco Pagani (@mmpagani)]

• Added the get_dip and get_strike methods to the gridded surface

[Michele Simionato (@micheles)]

• Added calculation of reinsurance-risk_by_event and reinsurance-aggcurves
  given a reinsurance.xml file
• Supported absolute values for deductible and insurance_limit
  in insurance calculations (before we supported only fractions)
• Reduced precision in the header of the UHS csv files
• Managed the case with CoVs = 0 for the beta distribution

OpenQuake Engine 3.15.0

[Michele Simionato (@micheles)]

• Added a check on sum(srcs_weights) == 1 for mutex sources

[Kendra Johnson (@kejohnso)]

• Fixed disaggregation by lon, lat in presence of multiFaultSources

[Michele Simionato (@micheles)]

• Replaced command oq download_shakemap with oq shakemap2gmfs
• Raised an error for missing required IMTs in ShakeMap grid files
• Extended the custom_site_id to 8 characters
• Restricted the accepted characters in risk IDs
• Extended disagg_by_src to mutually exclusive sources (i.e. Japan)
  and managed "colon" sources specially

[Anne Hulsey (@annehulsey)]

• Contributed Mag_Dist_TRT and Mag_Dist_TRT_Eps disaggregations

[Michele Simionato (@micheles)]

• Internal: added a way to disable the DbServer from openquake.cfg or
  by setting OQ_DATABASE=local
• Implemented total_losses, even for insurance calculations
• Optimized "computing risk" in the event_based_risk calculator (~30% faster)
• Changed the magnitude binning formula, thus fixing some disaggregation
  calculations (for instance when there is a single magnitude for a TRT)
• Changed the aggrisk/aggcurves exporters in presence of insurance losses
• Internal: changed how avg_losses, src_loss_table and agg_curves-stats are
  stored to simplify the management of secondary losses
• Internal: we have now repeatable rupture IDs in classical PSHA

[Pablo Iturrieta (@pabloitu)]

• Added support for negative binomial temporal occurrence models

[Marco Pagani (@mmpagani), Michele Simionato (@micheles)]

• Added support for disaggregation in case of mutually exclusive sources

[Michele Simionato (@micheles)]

• Fixed error message when trying to compute disagg_by_src with too many
  sources: in some cases, it contained a misleading reference to point sources
• Reorganized the Advanced Manual; changed the theme to be consistent with
  the OpenQuake manual
• Internal: added command oq db engine_version
• Added a check for required site parameters not passed correctly
• Fixed ps_grid_spacing approximation when the grid is degenerate
• Logging a warning when starting from an old hazard calculation
• The extra fields of the site collection were lost when using --hc

[Julián Santiago Montejo Espitia]

• Implemented the Arteta et al. (2021) subduction model for Colombia

[Michele Simionato (@micheles)]

• Added host field to the job table (dbserver restart required)
• --exports=csv was not honored for the realizations output; now it is

[Paul Henshaw (@pslh), Sandra Giacomini]

• Ported the OpenQuake manual from latex to reStructuredText format

[Michele Simionato (@micheles)]

• Entered automatically in sequential mode if there is not enough memory
• Raised an early error for missing risk IDs in the vulnerability files
• Changed the definition of aggrisk again to ensure consistency with the
  average losses

[Tom Son (@SnowNooDLe)]

• Added width and hypo_depth estimation to Campbell and Bozorgnia (2014)

[Michele Simionato (@micheles)]

• Improved the precision of the ps_grid_spacing approximation
• Added a check for missing mags when using GMPETables
• Fixed a bug in upgrade_nrml -m for point sources with different usd/lsd
• Automatically discard irrelevant TRTs in disaggregation calculations

[Ashta Poudel, Anirudh Rao (@raoanirudh), Michele Simionato (@micheles)]

• Added the ability to run connectivity analysis in event_based_damage
  and scenario_damage calculation with an appropriate exposure

[Tom Son (@SnowNooDLe), Michele Simionato (@micheles)]

• Added ztor estimation to Campbell and Bozorgnia (2014)

[Michele Simionato (@micheles)]

• Internal: removed REQUIRES_COMPUTED_PARAMETERS
• Using PointMSR when the reqv approximation is enabled
• Internal: changed the rupture storage for classical calculations
• Optimized rupture instantiation for point sources
• Optimized distance calculations for point sources

[Tom Son (@SnowNooDLe), Claudio Schill]

• Simple performance improvement of Kuehn et al. 2020 model

[Michele Simionato (@micheles)]

• Changed again the string representation of logic tree paths and added
  an utility hazardlib.lt.build to build trees from literal lists
• Fixed the field source_info.trti in the datastore to point to the
  correct tectonic region type index and not to zero
• Added a check for inconsistent IDs across different kinds of risk functions
  (i.e. fragility and consequence)
• Fixed a logging statement that could run out of memory in large calculations
• Optimized iter_ruptures for point sources by vectorizing the generation of
  planar surfaces by magnitude, nodal plane and hypocenter

[Tom Son (@SnowNooDLe)]

• Implemented a missing piece in Chiou & Youngs (2014) model
  Predicted PSA value at T ≤ 0.3s should be set equal to the value of PGA
  when it falls below the predicted PGA

[Marco Pagani (@mmpagani)]

• Added the possibility of disaggregating in terms of epsilon*
• Added a method to compute the cross-correlation matrix
• Added Hassani & Atkinson (2018)
• Added Hassani & Atkinson (2020)

[Michele Simionato (@micheles)]

• Fixed disaggregation returning NaNs in some situations with
  nonParametric/multiFaultSources
• Bug fix: not storing far away ruptures coming from multiFaultSources
• Implemented CScalingMSR
• Optimized context collapsing in classical calculations
• Setting ps_grid_spacing now sets the pointsource_distance too
• Saving memory in preclassical calculations on machines with 8 cores or less
• Changed the magnitude-dependent maximum_distance feature to discard
  ruptures below minmag and above maxmag
• Added the ability to estimate the runtime of a calculation by using
  the --sample-sources option
• Fixed a wrong formula in modifiable_gmpe.add_between_within_stds
• Reduced the stress on the memory in classical calculations, thus
  improving the performance
• Setting the truncation_level to the empty string is now forbidden;
  some GMFs calculations not setting truncation_level can now give
  different results since truncation_level=None is now replaced with
  truncation_level=99

OpenQuake Engine 3.14.0

Release 3.14.0

[Michele Simionato (@micheles)]

• Changed the definition of aggrisk: dividing by the effective time
• Internal: removed flag save_disk_space since now it is always on
• Slightly changed the collapsing of nodal planes and hypocenters in
  presence of the equivalent distance approximation (reqv)
• Extended oq reduce_sm to multiFaultSources
• Fixed the check on unique section IDs for multiFaultSources
• Implemented multi-aggregation with a syntax like
  aggregate_by=taxonomy,region;taxonomy;region
• Removed the obsolete commands oq to_shapefile and oq from_shapefile
  and turned pyshp into an optional dependency
• Setting num_rlzs_disagg=0 is now valid and it means considering
  all realizations in a disaggregation calculation
• Rounded the magnitudes in multiFaultSources to two digits

[Marco Pagani (@mmpagani)]

• Extended ModifiableGMPE to work with GMPETable and subclasses

[Michele Simionato (@micheles)]

• Upgraded shapely from version 1.7 to version 1.8: this causes slight
  changes in the results for most calculations
• Removed the not used (and not working) functionality applyToSourceType
• Raised an error when the total standard deviation is zero, unless
  truncation_level is set to zero

[Tom Son (@SnowNooDLe)]

• Fixed a typo and a few bugs within Kuehn et al. (2020) model to include
  Z2.5 when the given region is JAPAN

[Michele Simionato (@micheles)]

• Changed /extract/events to return events sorted by ID
• Changed the default amplification method to "convolution"
• Fixed a bug with discard_trts sometimes discarding too much
• Raised a helpful error message when ensurepip is missing
• Fixed parentdir bug in event_based_damage
• Fixed sorting bug in the /v1/calc/run web API
• Internal: introduced limited unique rupture IDs in classical calculations
  with few sites

[Prajakta Jadhav (@Prajakta-Jadhav-25), Dharma Wijewickreme (@Dharma-Wijewickreme)]

• Added GMPE Youd et al. (2002) and the corresponding site parameters

[Michele Simionato (@micheles)]

• Fixed the exporter aggrisk-stats in the case of zero losses
• Vectorized all GMPEs and forbidden non-vectorized GMPEs
• Raised the limit to 94 GMPEs per tectonic region type
• Optimized the NBCC2015_AA13 GMPEs
• Optimized the GMPETable and the derived NGAEast GMPEs
• Fixed a 32/64 bit bug in oq export loss_maps-stats

[Marco Pagani (@mmpagani)]

• Added a more flexible version of the GC2 implementation
• Added caching of distances in multi fault ruptures
• Added the NRCan site term to the modifiable GMPE

[Michele Simionato (@micheles)]

• Optimized .get_bounding_box, .polygon and .mesh_size for MultiFaultSources
• Fixed bug in presence of mixed vectorized/nonvectorized GMPEs
• Extended oq postzip to multiple files and oq abort to multiple jobs
• Internal: changed install.py to install the venv in /opt/openquake/venv
• Fixed a BOM issue on Windows when reading job.ini files

OpenQuake Engine 3.11.5

Release 3.11.5

[Michele Simionato (@micheles)]

• Fixed a 32/64 bit bug in oq export loss_maps-stats

OpenQuake Engine 3.13.0

[Michele Simionato (@micheles)]

• Improved the precision of the pointsource_distance approximation
• Added command oq show rlz:<no>
• Internal: added an environment variable OQ_DATABASE

[Manuela Villani (@mvillani)]

• Added a function in the modifiable GMPE to convert ground-motion assuming
  different representations of the horizontal component.

[Kendra Johnson (@kejohnso)]

• Implemented possibility of assigning the parameters floating_x_step and
  floating_y_step for kite fault sources in the job configuration file

[Michele Simionato (@micheles)]

• The branchID is now autogenerated in the gsim logic tree files, thus
  solving the issue of wrong branch paths for duplicated branchIDs
• Added a check for missing gsim information in the job.ini file
• Fixed the case of continuous fragility functions with minIML=noDamageLimit

[Miguel Leonardo-Suárez (@mleonardos)]

• Added GMPE from Jaimes et al. (2020) for Mexican intraslab earthquakes

[Michele Simionato (@micheles)]

• Enforced ps_grid_spacing <= pointsource_distance
• Internal: added command oq plot source_data?
• The engine is now splitting the MultiFaultSources, thus improving the task
  distribution

[Claudia Mascandola (@mascandola)]

• Added a new class to the abrahamson_2015 gmm.
• Added a new class to the lanzano_luzi_2019 and skarlatoudis_2013 gmms

[Marco Pagani (@mmpagani), Shreyasvi Chandrasekhar (@Shreyasvi91)]

• Added GMM from Bora et al. (2019)
• Fixed bug in the multifault surface when defined using kite fault surfaces

[Giuseppina Tusa (@gtus23)]

• Added a new gsim file tusa_langer_azzaro_2019.py to implement the GMMs
  from Tusa et al. (2020).

[Michele Simionato (@micheles)]

• Added command oq compare uhs CALC_1 CALC_2
• split_sources=false is now honored in disaggregation calculations
• Internal: rup/src_id now refers to the row in the source_info table

[Miguel Leonardo-Suárez (@mleonardos)]

• Added the GMPE Arroyo et al. (2010) for Mexican subduction interface events

[Marco Pagani (@mmpagani)]

• Added a new method to the modifiable GMPE with which is possible to
  compute spatially correlated ground-motion fields even when the initial
  GMM only provides the total standard deviation.
• Fixed a bug in the modify_recompute_mmax
• Added a get_coeffs method to the CoeffTable class
• Added support for EAS, FAS, DRVT intensitity measure types

[Michele Simionato (@micheles)]

• Extended the mag-dependent filtering to the event based calculator
• The flag discrete_damage_distribution=true was incorrectly ignored when
  computing the consequences
• Implemented reaggregate_by feature
• Supported the custom_site_id in the GMF exporters
• Bug fix: the site collection of the child calculation was ignored when
  using the --hazard-calculation-id option
• Supported Python 3.9 and deprecated Python 3.6
• Extended oq prepare_site_model to support .csv.gz files
• Solved the issue of "compute gmfs" slow tasks in event_based and used
  the same approach in classical calculations too
• Made sure valid.gsim instantiates the GSIM
• ShakeMap calculations failing with a nonpositive definite correlation
  matrix now point out to the manual for the solution of the problem
• Introduced the GodaAtkinson2009 cross correlation between event model
• Specifying consequence files without fragility files now raises an error
• Fixed a bug in event_based_risk with nontrivial taxonomy mapping producing
  NaNs in the event loss table
• Internal: added kubernetes support from the WebUI

[Shreyasvi Chandrasekhar (@Shreyasvi91)]

• Added a new GMPE for significant duration proposed by Bahrampouri et al
  (2021).

[Claudia Mascandola (@mascandola)]

• Added the computation of tau and phi stdevs to the sgobba_2020 GMPE
• Added a new class to the lanzano_2019 gmm.

[Michele Simionato (@micheles)]

• Changed completely the storage of the PoEs and reduced the memory
  consumption in classical calculations (plus 4x speedup in "postclassical")
• Changed the behavior of sites_slice
• Changed custom_site_id to an ASCII string up to 6 characters
• Fixed the error raised in presence of a mag-dep distance for a tectonic
  region type and a scalar distance for another one

[Yen-Shin Chen (@vup1120)]

• Added the Thingbaijam et al. (2017) Magnitude Scaling Law for Strike-slip

[Michele Simionato (@micheles)]

• Changed the API of ContextMaker.get_mean_stds
• Extended the WebUI to run sensitivity analysis calculations
• Changed the string representation of logic tree paths and enforced a
  maximum of 64 branches per branchset
• Added command oq info disagg
• Accepted site models with missing parameters by using the global site
  parameters instead
• Supported the syntax
  source_model_logic_tree_file = ${mosaic}/XXX/in/ssmLT.xml
• Fixed a performance bug with ignore_master_seed=true
• Added a command oq info cfg to show the configuration file paths
• Added a check on the intensity measure levels with --hc is used
• Bug fix: pointsource_distance = 0 was not honored
• Fixed a small bug of oq zip job_haz.ini -r job_risk.ini: now it works
  even if the oqdata directory is empty
• Optimized the aggregation of losses in event_based_risk and made it possible
  to aggregate by site_id for more than 65,536 sites
• Fixed the calculation of average insured losses with a nontrivial taxonomy
  mapping: now the insured losses are computed before the average procedure,
  not after
• Unified scenario_risk with event_based_risk, changing the numbers
  when producing discrete damage distributions
• Added aggrisk output to event based damage calculation
• Added parameter discrete_damage_distribution in scenario damage
  calculations and changed the default behavior
• Deprecated consequence models in XML format
• Event based damage calculations now explicitly require to specify
  number_of_logic_tree_samples (before it assumed a default of 1)

[Elena Manea (@manea), Laurentiu Danciu (@danciul)]

• Added the GMPE Manea (2021)

[Michele Simionato (@micheles)]

• Added a check against duplicated branchset IDs
• Improved error checking when reading the taxonomy mapping file
• Renamed conversion -> risk_id in the header of the taxonomy mapping file

[Antonio Ettorre (@vot4anto)]

• Bumped h5py to version 3.1.0

[Michele Simionato (@micheles)]

• Renamed the parameter individual_curves -> individual_rlzs
• Reduced the number of disaggregation outputs and removed the long-time
  deprecated XML exporters
• Fixed the ShakeMap calculator failing with a TypeError:
  get_array_usgs_id() got an unexpected keyword argument 'id'
• Added conseq_ratio in the aggcurves exporter for event_based_damage
• Added a conditional_spectrum calculator
• Fixed an array<->scalar bug in abrahamson_gulerce_2020
• Restored the classical tiling calculator

OpenQuake Engine 3.12.1

[Michele Simionato (@micheles)]

• Fixed a bug in event_based_risk with nontrivial taxonomy mapping producing
  NaNs in the event loss table
• Bug fix: pointsource_distance = 0 was not honored
• Improved the universal installer when installing over a previous
  installation from packages
• Fixed an error in oq zip job_haz.ini -r job_risk.ini
• Fixed the disaggregation Mag_Lon_Lat exporter header mixup
• Fixed the ShakeMap calculator failing with a TypeError:
  get_array_usgs_id() got an unexpected keyword argument 'id'
• Fixed the Abrahamson Gulerce GMPE failing with a scalar<->array error