Skip to content

Latest commit

 

History

History
158 lines (113 loc) · 5.54 KB

Studies-Overrides.md

File metadata and controls

158 lines (113 loc) · 5.54 KB
Raw

You can set the default style along with the input values for newly created indicators using the studies_overrides parameter. Its value is expected to be an object where key is a path to a property that is going to be changed while value is the new value for it.

Example:

studies_overrides: {
    "volume.volume.color.0": "rgba(0, 255, 255, 0.8)",
    "volume.volume.color.1": "#0000FF",
    "volume.volume ma.color": "rgba(255, 0, 0, 0.7)",
    "volume.volume ma.linewidth": 5,
    "volume.volume ma.visible": true,
    "bollinger bands.median.color": "#33FF88",
    "bollinger bands.upper.linewidth": 7
}

In the example above, all created Bollinger Bands will have upper line width set to 7 (unless you create it through an API and specify a different value).

Setting the study name

You should use the names of the studies in the Insert Study dialog as they are but using lower case letters.

If you wish to override default EMA's length, try using moving average exponential.length.

The same logic applies to input names: use names as you see them in the Study Properties dialog (use lower case letters).

Example: stochastic.smooth d.

Compare

You can customize new series that are added via Compare.

For instance:

  • compare.plot to customize the line

  • compare.source to change the price source

    "compare.plot.color": "#000000",
"compare.source": "high"

  • compare.minTick to override the 'Min Tick' value (see here for more information).

Overlay

Starting from V 1.12 you may use the following properties to customize Overlay:

Overlay.style: (bars = 0, candles = 1, line = 2, area = 3, heiken ashi = 8, hollow candles = 9)
Overlay.showPriceLine: boolean
Overlay.allowExtendTimeScale: boolean (whether an overlay should extend time axis, the property is used only when 'secondary_series_extend_time_scale' featureset is enabled)

Overlay.candleStyle.upColor: color
Overlay.candleStyle.downColor: color
Overlay.candleStyle.drawWick: boolean
Overlay.candleStyle.drawBorder: boolean
Overlay.candleStyle.borderColor: color
Overlay.candleStyle.borderUpColor: color
Overlay.candleStyle.borderDownColor: color
Overlay.candleStyle.wickColor: color
Overlay.candleStyle.barColorsOnPrevClose: boolean

Overlay.hollowCandleStyle.upColor: color
Overlay.hollowCandleStyle.downColor: color
Overlay.hollowCandleStyle.drawWick: boolean
Overlay.hollowCandleStyle.drawBorder: boolean
Overlay.hollowCandleStyle.borderColor: color
Overlay.hollowCandleStyle.borderUpColor: color
Overlay.hollowCandleStyle.borderDownColor: color
Overlay.hollowCandleStyle.wickColor: color
Overlay.hollowCandleStyle.barColorsOnPrevClose: boolean

Overlay.barStyle.upColor: color
Overlay.barStyle.downColor: color
Overlay.barStyle.barColorsOnPrevClose: boolean
Overlay.barStyle.dontDrawOpen: boolean

Overlay.lineStyle.color: color
Overlay.lineStyle.linewidth: integer
Overlay.lineStyle.priceSource: open/high/low/close
Overlay.lineStyle.styleType: (bars = 0, candles = 1, line = 2, area = 3, heiken ashi = 8, hollow candles = 9)

Overlay.areaStyle.color1: color
Overlay.areaStyle.color2: color
Overlay.areaStyle.linecolor: color
Overlay.areaStyle.linestyle: (solid = 0; dotted = 1; dashed = 2; large dashed = 3)
Overlay.areaStyle.linewidth: integer
Overlay.areaStyle.priceSource: open/high/low/close

Overlay.minTick: minTick value

(See here for more information about minTick value)

Syntax

Property path is a set of lower case identifiers split with a dot (.). Path formats are described below.

Remark: You can get an error if a plot/band/area/input name is the same . In this case you can specify an exact destination that you want to change by adding :plot, :band, :area or :input to the path. (e.g. short:plot.color)

Study input

Format: indicator_name.input_name

  • indicator_name: use the name as you see it in the Indicators dialog.
  • input_name: use the name as you see it in the indicator's properties dialog (for example, show ma)

Examples: volume.volume ma.visible, bollinger bands.length

Plot property

Format: indicator_name.plot_name.property_name

  • indicator_name: < ... >
  • plot_name: as you see it in the indicator's properties dialog (for example, Volume or Plot)
  • property_name: one of the following:
    • linewidth
    • visible: boolean
    • plottype. Supported plot types are:
      • line
      • histogram
      • cross
      • area
      • columns
      • circles
      • line_with_breaks
      • area_with_breaks

Examples: volume.volume.linewidth, bollinger bands.median.linewidth

Plot colors

Format: indicator_name.plot_name.color<.color_index>

  • indicator_name: < ... >
  • plot_name: < ... >
  • color. It's just a keyword.
  • color_index (optional): color index (if any). It's just an ordinal number of a color for this plot. I.e., to replace the color that is green by default for Volume, one should use color_index = 1.

Remark 1: color.0 is a synonym of color. Paths such as volume.volume.color.0 and volume.volume.color are treated the same.

Remark 2: The customization of area fill color and transparency is not supported currently.

Limitations:

  • Only #RRGGBB format is supported for colors. Do not use a short format #RGB.
  • Transparency varies and the range is [0..100]. 100 means plot is fully opaque.
  • Thickness is an integer.

Precision

You can change the default precision of studies using the name.precision format starting from V 1.6.

Example: "average true range.precision": 8