Fox Inverter and Grid detection.

[coxianuk]

Hi, I am new to HA and having lots of fun getting it working for me. Love the Power flow card however there is a little niggle due to the hybrid inverter I have and the fact the pre-existing solar is on its own inverter with Owl monitoring. The Hybrid is a Fox AC1 G2. This has a rather annoying feature of check that the grid is still there by either drawing or feeding in power. This is a low level say 5 watts (have seen up to 30W but that might be something else). The issue is that when I have the solar feed it shows that power taken from the solar (feed-in) and to the house (consumption).

Is there anyway this could be configured to show <= {threshold} grid to/from battery rather than solar/home? Above that threshold then clearly the grid is being pulled into the house and feed-in would be from solar to grid.

Just to be clear on the house config. We have solar panels on 1 inverter feeding the house. To keep the contract we have, the second inverter (fox) takes what was the feed-in and charges the batteries (self-use mode) any excess solar is then fed to the grid. When not enough solar, house draws from the battery and grid (if required).

The fox inverter allows force charge mode which when setup means it will take up to 5Kw into the battery and during the force charge period anything the house needs is also taken from the grid if not enough solar.