Conflict on the Smokeview Technical Reference Guide in p. 35 section 3.5.1

[TopiR]

This is not isue on the smokeview itself but on it's documentation and more specific on The Technical Reference Guide.
The document's section 3.5.1 presents two FED calculation examples and graphs for both Figure 3.14 but there are three things that I dont't know are those intentionals or not:

1. The formulas (3.20) and (3.21) are not equal
2. The unit for time in the example is second instead minute as the previous section 3.5 describes
3. The Figures 3.14 first graph for ambient doesn't match if calculated using parameters given at the end of section 3.5.1. On the other hand the graph seems to match if using values CO=0ppm, CO2=9% and 02=21%.
   In attachment there is plotted graph which is the same scale as the Figure 3.14 and on the background "brown line" is the graph from Reference Guide. The other smoke filled room graph seems to fine besides the time unit.

[rmcdermo]

Thanks, we will take a look.

[gforney]

I'll take a look

[NexusQuile]

The errors still appear in the current version of the technical reference guide and I agree with TopiR's analysis.

I've created a pull request for the fixed equation and correcting the input values for the ambient exmaple.

However the x-axis lables in Figure 3.14 a) and b) still need correcting.