Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[3.0.6] Zigbee stack assertion failed common/zb_error_indication.c:81 #10489

Open
1 task done
lboue opened this issue Oct 21, 2024 · 7 comments
Open
1 task done

[3.0.6] Zigbee stack assertion failed common/zb_error_indication.c:81 #10489

lboue opened this issue Oct 21, 2024 · 7 comments
Assignees
@P-R-O-C-H-Y
Labels
Status: Awaiting triage Issue is waiting for triage

Comments

@lboue
Copy link
Contributor

lboue commented Oct 21, 2024

Board

ESP32-C6-WROOM-1

Device Description

N/A

Hardware Configuration

N/A

Version

v3.0.6

IDE Name

Arduino IDE

Operating System

Windows 11

Flash frequency

80 MHz

PSRAM enabled

no

Upload speed

115200

Description

The application crashes and restarts in a loop when I run the Zigbee_On_Off_Light example provided.

Sketch

https://github.com/espressif/arduino-esp32/tree/master/libraries/Zigbee/examples/Zigbee_On_Off_Light

Debug Message

ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0xc (SW_CPU),boot:0xc (SPI_FAST_FLASH_BOOT)
Saved PC:0x4001975a
SPIWP:0xee
mode:DIO, clock div:2
load:0x4086c410,len:0xcf8
load:0x4086e610,len:0x2e30
load:0x40875728,len:0x113c
entry 0x4086c410
=========== Before Setup Start ===========
Chip Info:
------------------------------------------
  Model             : ESP32-C6
  Package           : 0
  Revision          : 0.00
  Cores             : 1
  CPU Frequency     : 160 MHz
  XTAL Frequency    : 40 MHz
  Features Bitfield : 0x00000052
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : No
  BT Low Energy     : Yes
  IEEE 802.15.4     : Yes
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   450764 B ( 440.2 KB)
  Free Bytes        :   415740 B ( 406.0 KB)
  Allocated Bytes   :    28024 B (  27.4 KB)
  Minimum Free Bytes:   415696 B ( 406.0 KB)
  Largest Free Block:   393204 B ( 384.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         :  8388608 B (8 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 40 MHz
  Bus Mode          : QIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1388.0 KB, type: DATA, subtype: SPIFFS
         zb_storage : addr: 0x003EB000, size:    16.0 KB, type: DATA, subtype: FAT
             zb_fct : addr: 0x003EF000, size:     4.0 KB, type: DATA, subtype: FAT
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Oct 21 2024 11:11:36
  Compile Host OS   : windows
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.6
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : ESP32C6_DEV
  Arduino Variant   : esp32c6
  Arduino FQBN      : esp32:esp32:esp32c6:UploadSpeed=921600,CDCOnBoot=default,CPUFreq=160,FlashFreq=80,FlashMode=qio,FlashSize=4M,PartitionScheme=zigbee,DebugLevel=debug,EraseFlash=none,JTAGAdapter=default,ZigbeeMode=ed
============ Before Setup End ============
[   598][D][Zigbee_On_Off_Light.ino:63] setup(): Adding ZigbeeLight endpoint to Zigbee Core
[   606][D][ZigbeeCore.cpp:63] addEndpoint(): Endpoint: 10, Device ID: 0x0100
[   613][D][Zigbee_On_Off_Light.ino:67] setup(): Calling Zigbee.begin()
[   619][D][ZigbeeCore.cpp:94] zigbeeInit(): Initialize Zigbee stack
[   660][D][ZigbeeCore.cpp:101] zigbeeInit(): Register all Zigbee EPs in list
[   668][I][ZigbeeCore.cpp:109] zigbeeInit(): List of registered Zigbee EPs:
[   674][I][ZigbeeCore.cpp:111] zigbeeInit(): Device type: On/Off Light Device, Endpoint: 10, Device ID: 0x0100
=========== After Setup Start ============
[   687][I][ZigbeeCore.cpp:179] esp_zb_app_signal_handler(): Zigbee stack initialized
[   698][I][ZigbeeCore.cpp:185] esp_zb_app_signal_handler(): Device started up in  factory-reset mode
[   707][I][ZigbeeCore.cpp:192] esp_zb_app_signal_handler(): Start network steering
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   450764 B ( 440.2 KB)
  Free Bytes        :   392368 B ( 383.2 KB)
  Allocated Bytes   :    50492 B (  49.3 KB)
  Minimum Free Bytes:   392368 B ( 383.2 KB)
  Largest Free Block:   376820 B ( 368.0 KB)
------------------------------------------
GPIO Info:
------------------------------------------
  GPIO : BUS_TYPE[bus/unit][chan]
  --------------------------------------
     8 : RMT_TX
     9 : GPIO
    16 : UART_TX[0]
    17 : UART_RX[0]
============ After Setup End =============
Zigbee stack assertion failed common/zb_error_indication.c:81

abort() was called at PC 0x420125c1 on core 0
Core  0 register dump:
MEPC    : 0x40801dc6  RA      : 0x4080787a  SP      : 0x40820210  GP      : 0x4080e870
TP      : 0x4080d8d0  T0      : 0x37363534  T1      : 0x7271706f  T2      : 0x33323130
S0/FP   : 0x4082023c  S1      : 0x4082023c  A0      : 0x40820248  A1      : 0x4082022a
A2      : 0x00000000  A3      : 0x40820275  A4      : 0x00000001  A5      : 0x40815000
A6      : 0x00000000  A7      : 0x76757473  S2      : 0x00000000  S3      : 0x408121c4
S4      : 0x00000001  S5      : 0x4081aa4c  S6      : 0x00000008  S7      : 0x00000000
S8      : 0x00000019  S9      : 0x00000000  S10     : 0x00000003  S11     : 0x00000007
T3      : 0x6e6d6c6b  T4      : 0x6a696867  T5      : 0x66656463  T6      : 0x62613938
MSTATUS : 0x00001881  MTVEC   : 0x40800001  MCAUSE  : 0x00000007  MTVAL   : 0x00000000
MHARTID : 0x00000000

Stack memory:
40820210: 0x00000003 0x00000000 0x4082023c 0x4080d010 0x00000008 0x4081aa4c 0x00000030 0x4080f704
40820230: 0x4082023c 0x4080f720 0x40820228 0x31303234 0x31633532 0x00000000 0x726f6261 0x20292874
40820250: 0x20736177 0x6c6c6163 0x61206465 0x43502074 0x34783020 0x32313032 0x20316335 0x63206e6f
40820270: 0x2065726f 0x00000030 0x00000000 0x4103322f 0x0000002f 0x408125b0 0x42075da9 0x420125c4
40820290: 0x00006363 0x00000000 0x00000019 0x00000051 0x00000008 0x4081aa4c 0x000000fe 0x4203948a
408202b0: 0x00000000 0x408125b0 0x40820310 0x4201393c 0x332f4243 0xea87a38d 0x00000390 0x0000000e
408202d0: 0x00000000 0x000e0080 0x00000000 0x00000000 0x00000008 0x4081aa4c 0x4081aa55 0x00000000
408202f0: 0x0000000e 0x00000050 0x408125b0 0x420157b8 0x00000000 0x00000000 0x00000000 0x42000000
40820310: 0x00000010 0x000e0080 0x00000000 0x00000000 0x40820350 0x408105b0 0x4081939e 0x420158b2
40820330: 0x00000000 0x40820350 0x00000001 0x00000004 0x00000000 0x00000000 0x00000004 0x420224f4
40820350: 0xfe3bd100 0xe0798dff 0xf98e0ee7 0x787cc510 0x332f4243 0xea87a38d 0x00000004 0x00000000
40820370: 0x4081aa4c 0x00000000 0x408105b0 0x00000000 0x00000000 0x42022582 0x7fffffff 0x00000003
40820390: 0x4081aa4c 0x00000000 0x408105b0 0x420227fa 0x00000003 0x00000000 0x00000000 0x0039fdc5
408203b0: 0x00000000 0x00060de5 0x7fffffff 0x000000ff 0x0000000f 0x42022582 0x7fffffff 0x000000ff
408203d0: 0x0000000f 0x00000000 0x408105b0 0x4201690e 0x00000000 0x00000000 0x00000000 0x00000000
408203f0: 0x00000000 0x00000000 0x4081ee00 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
40820410: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x4200777c
40820430: 0x00000000 0x00000000 0x00000000 0x42007792 0x00000000 0x00000000 0x00000000 0x4080a3ee
40820450: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
40820470: 0x00000000 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xbaad5678 0x0005c181 0x40815484
40820490: 0x40815484 0x00000010 0x40812e00 0x00000050 0x00000010 0x00000010 0x4080ea8c 0x4080374e
408204b0: 0x00000000 0x00000010 0x4080ea8c 0x40801b70 0x00000010 0x00000010 0x00000000 0x40800f9e
408204d0: 0x00000000 0x00000010 0x00000000 0x408015aa 0x00000003 0x001e0040 0x0000000b 0x4080ea1c
408204f0: 0x0000000b 0x00000000 0x00000000 0x00000000 0x00000001 0x00000014 0x00000000 0x00000007
40820510: 0x4080ea3c 0x40820544 0x60003000 0x4080b9d0 0x4080ea3c 0x40820554 0xffffffff 0x40820700
40820530: 0x0007a120 0x4082057c 0x4080ea3c 0x4080d28a 0x00000000 0x00010000 0x00000000 0x00000000
40820550: 0x40820540 0x00000000 0x00000005 0x00000000 0x40820550 0x0007a121 0x4080ea1c 0x4080d898
40820570: 0x00000100 0x003eb070 0x408206d0 0x4080ea1c 0x00000000 0x00000030 0x60003000 0x4080ba44
40820590: 0x4080a52c 0x4080966c 0x40820610 0x4080e870 0x4080dc70 0x40022494 0xffffffe0 0x00000007
408205b0: 0x00000019 0x00000000 0x0000002f 0x00000000 0x00000000 0x4202da14 0x4081eccc 0x408083a4
408205d0: 0x4080a52c 0x40809622 0x40820650 0xffffffff 0x4080dc70 0x40022494 0x4081ec04 0x408083a4
408205f0: 0x00000004 0x40815000 0x4081f650 0x00000000 0x4080a598 0x4080a57c 0x40820680 0x4080e870



ELF file SHA256: b22517d3285b6b1a

Rebooting...

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

  • I confirm I have checked existing issues, online documentation and Troubleshooting guide.
@lboue lboue added the Status: Awaiting triage Issue is waiting for triage label Oct 21, 2024
@VojtechBartoska
Copy link
Collaborator

@P-R-O-C-H-Y Please help with triage, thanks

@P-R-O-C-H-Y
Copy link
Member

@lboue I will retest and reply :)

@lboue
Copy link
Contributor Author

lboue commented Oct 21, 2024 •
edited
Loading

Same issue with an ESP32-H2 board:

------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1388.0 KB, type: DATA, subtype: SPIFFS
         zb_storage : addr: 0x003EB000, size:    16.0 KB, type: DATA, subtype: FAT
             zb_fct : addr: 0x003EF000, size:     4.0 KB, type: DATA, subtype: FAT
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Oct 21 2024 12:55:30
  Compile Host OS   : windows
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.6
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : ESP32H2_DEV
  Arduino Variant   : esp32h2
  Arduino FQBN      : esp32:esp32:esp32h2:UploadSpeed=921600,CDCOnBoot=default,FlashFreq=64,FlashMode=qio,FlashSize=4M,PartitionScheme=zigbee,DebugLevel=debug,EraseFlash=all,JTAGAdapter=default,ZigbeeMode=ed
============ Before Setup End ============
[   651][D][Zigbee_Color_Dimmable_Light.ino:80] setup(): Adding ZigbeeLight endpoint to Zigbee Core
[   660][D][ZigbeeCore.cpp:63] addEndpoint(): Endpoint: 10, Device ID: 0x0102
[   667][D][Zigbee_Color_Dimmable_Light.ino:84] setup(): Calling Zigbee.begin()
[   674][D][ZigbeeCore.cpp:94] zigbeeInit(): Initialize Zigbee stack
[   693][D][ZigbeeCore.cpp:101] zigbeeInit(): Register all Zigbee EPs in list
[   702][I][ZigbeeCore.cpp:109] zigbeeInit(): List of registered Zigbee EPs:
[   709][I][ZigbeeCore.cpp:111] zigbeeInit(): Device type: Color Dimmable Light Device, Endpoint: 10, Device ID: 0x0102
=========== After Setup Start ============
[   724][I][ZigbeeCore.cpp:179] esp_zb_app_signal_handler(): Zigbee stack initialized
[   735][I][ZigbeeCore.cpp:185] esp_zb_app_signal_handler(): Device started up in  factory-reset mode
[   744][I][ZigbeeCore.cpp:192] esp_zb_app_signal_handler(): Start network steering
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   246528 B ( 240.8 KB)
  Free Bytes        :   189776 B ( 185.3 KB)
  Allocated Bytes   :    50496 B (  49.3 KB)
  Minimum Free Bytes:   189768 B ( 185.3 KB)
  Largest Free Block:   184308 B ( 180.0 KB)
------------------------------------------
GPIO Info:
------------------------------------------
  GPIO : BUS_TYPE[bus/unit][chan]
  --------------------------------------  
     8 : RMT_TX
     9 : GPIO
    23 : UART_RX[0]
    24 : UART_TX[0]
============ After Setup End =============
Zigbee stack assertion failed common/zb_error_indication.c:81

abort() was called at PC 0x42012dd9 on core 0
Core  0 register dump:
MEPC    : 0x40801e46  RA      : 0x408063d4  SP      : 0x4081f360  GP      : 0x4080d220  
TP      : 0x4080bd98  T0      : 0x37363534  T1      : 0x7271706f  T2      : 0x33323130  
S0/FP   : 0x4081f38c  S1      : 0x4081f38c  A0      : 0x4081f398  A1      : 0x4081f37a  
A2      : 0x00000000  A3      : 0x4081f3c5  A4      : 0x00000001  A5      : 0x40814000  
A6      : 0x00000000  A7      : 0x76757473  S2      : 0x00000000  S3      : 0x4081082c  
S4      : 0x00000001  S5      : 0x420232a8  S6      : 0x00000000  S7      : 0x00000000  
S8      : 0x00000011  S9      : 0x00000000  S10     : 0x0000000f  S11     : 0x00000007  
T3      : 0x6e6d6c6b  T4      : 0x6a696867  T5      : 0x66656463  T6      : 0x62613938  
MSTATUS : 0x00001881  MTVEC   : 0x40800001  MCAUSE  : 0x00000007  MTVAL   : 0x00000000  
MHARTID : 0x00000000  

Stack memory:
4081f360: 0x0000000f 0x00000000 0x4081f38c 0x4080b9cc 0x00000000 0x420232a8 0x00000030 0x4080df8c
4081f380: 0x4081f38c 0x4080dfa8 0x4081f378 0x31303234 0x39646432 0x00000000 0x726f6261 0x20292874
4081f3a0: 0x20736177 0x6c6c6163 0x61206465 0x43502074 0x34783020 0x32313032 0x20396464 0x63206e6f
4081f3c0: 0x2065726f 0x00000030 0x00000000 0xe6f5c6bf 0x0000002f 0x40810c18 0x42075e7d 0x42012ddc
4081f3e0: 0x0000087f 0x00000000 0x00000011 0x00000051 0x00000000 0x420232a8 0x000000fe 0x4203cda0
4081f400: 0x00000000 0x40810c18 0x4081f460 0x42014154 0xe39a88ad 0x783937b1 0x00000490 0x0000000e
4081f420: 0x00000005 0x000e0080 0x00000000 0x00000000 0x00000000 0x420232a8 0x7fffffff 0x00000000
4081f440: 0x0000000e 0x00000050 0x40810c18 0x42015fd0 0x00000000 0x00000000 0x00000000 0xd4000000
4081f460: 0x00000005 0x000e0080 0x00000000 0x00000000 0x4081f4a0 0x4080ec18 0x00000032 0x420160ca
4081f480: 0x00000005 0x0000000f 0x4081bbce 0x0000ffff 0x00000005 0x0000000f 0x4081bbce 0x4202336a
4081f4a0: 0xfe3bd100 0xe0798dff 0xc5119599 0xd4ad61f1 0xe39a88ad 0x783937b1 0x00000008 0x00000000
4081f4c0: 0x0000000f 0x00000001 0x4080ec18 0x000000ff 0x0000000f 0x00000000 0x4080ec18 0x42017126
4081f4e0: 0x00000000 0x00000000 0x00000000 0x0000001a 0x00000000 0x00000000 0x408172ec 0x00000000
4081f500: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
4081f520: 0x00000000 0x00000000 0x00000000 0x42007f60 0x00000000 0x00000000 0x00000000 0x42007f76
4081f540: 0x00000000 0x00000000 0x00000000 0x40808f48 0x00000000 0x00000000 0x00000000 0x00000000
4081f560: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5
4081f580: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xbaad5678 0x0002dde9 0x40813bf4 0x40813bf4 0xdbac70cc
4081f5a0: 0x7a814a02 0x0cfd8ba7 0x04e3eacb 0x4a9b4450 0x40c628f0 0x56506bd3 0x3171e1c2 0xbd538940
4081f5c0: 0x0016804a 0x28fdc06c 0xf7bc855e 0xfd42063c 0xd4225f21 0x1e51e15e 0x0ecce3ba 0x7ffe2d5b
4081f5e0: 0x3d6b9a0c 0x4d46a085 0xaef6dd6c 0x1cf9b7e6 0x01496230 0xba1a224e 0x8851c988 0xa3554fdb
4081f600: 0x200a602c 0x5c02f2c1 0x638e95b9 0xedddafef 0x09746042 0x6944bac4 0x01ebdde4 0x06d03a91
4081f620: 0x0a3b6516 0x16b6f718 0x79962c80 0x876d8c45 0x827f2666 0x1b27a057 0x113e5ddc 0x355aac25
4081f640: 0x477125d3 0xa8f3cd16 0xaaf63f3c 0x69bf9ae9 0x95449754 0x103070a1 0x6dfffeae 0x2e9ff678
4081f660: 0xb0321f63 0x93940cfe 0xad98dbbe 0xaab19a4f 0xc4f1005a 0xc7104d15 0x4606aa51 0xcb4d943d
4081f680: 0xc71ba038 0x5064c784 0xa708b554 0xcf90abcd 0x2a0d44b9 0xcb528501 0xb43a2fe2 0x64d55414
4081f6a0: 0xba8fc2b4 0xe8157fcf 0xbf268c07 0x3fdbd86c 0x1c9896a0 0x6bd85845 0x59a77b3e 0x19517593
4081f6c0: 0x6ac1d0bb 0xda0c9d42 0xbae634b2 0x76c12b1b 0x1221eaeb 0x3338252b 0xc3f08b0e 0x53066f7c
4081f6e0: 0x56890dbb 0x88804a90 0x47dc7e19 0x699dfed1 0x405dc04f 0xc4439b8e 0xc3c6f366 0x6ddd52b1
4081f700: 0x29e4a4c3 0x46607980 0x60959315 0xf8c3bdaf 0x929f1033 0x781dd859 0x5e18f4da 0x75ef656a
4081f720: 0x829f7469 0xf5fc3c92 0x79d5ba3e 0x787cb1d8 0x9c5b047d 0x1f095a72 0x9ed201e2 0xa3b06abb
4081f740: 0x7782a68c 0x79097d06 0xc8f81bdb 0xcdaf9f69 0xaa44372c 0x94543411 0xc9b733e0 0xe4d05746

@Jason2866
Copy link
Collaborator

Can not reproduce with H2. Works so far

Chip Info:
------------------------------------------
  Model             : ESP32-H2
  Package           : 0
  Revision          : 0.01
  Cores             : 1
  CPU Frequency     : 96 MHz
  XTAL Frequency    : 32 MHz
  Features Bitfield : 0x00000050
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : No
  Classic BT        : No
  BT Low Energy     : Yes
  IEEE 802.15.4     : Yes
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   246640 B ( 240.9 KB)
  Free Bytes        :   213632 B ( 208.6 KB)
  Allocated Bytes   :    27808 B (  27.2 KB)
  Minimum Free Bytes:   213632 B ( 208.6 KB)
  Largest Free Block:   204788 B ( 200.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         :  4194304 B (4 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 64 MHz
  Bus Mode          : QIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1388.0 KB, type: DATA, subtype: SPIFFS
         zb_storage : addr: 0x003EB000, size:    16.0 KB, type: DATA, subtype: FAT
             zb_fct : addr: 0x003EF000, size:     4.0 KB, type: DATA, subtype: FAT
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Oct 21 2024 13:26:58
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.6
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : Espressif ESP32-H2-DevKit
  Arduino Variant   : esp32h2
  Core Debug Level  : 5
  Arduino Runs Core : 0
  Arduino Events on : 0
  CDC On Boot       : 0
============ Before Setup End ============
[   648][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x420026b4
[   659][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type GPIO (1) with bus 0x9
[   669][V][esp32-hal-rmt.c:454] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[   678][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_TX (10) successfully set to 0x42003c6c
[   689][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_RX (11) successfully set to 0x42003c6c
[   700][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type INIT (0) with bus 0x0
[   711][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type RMT_TX (10) with bus 0x4084e19c
[   722][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[   731][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
[   742][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x420026b4
[   754][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 9 successfully set to type GPIO (1) with bus 0xa
[   763][D][Zigbee_On_Off_Light.ino:63] setup(): Adding ZigbeeLight endpoint to Zigbee Core
[   772][D][ZigbeeCore.cpp:63] addEndpoint(): Endpoint: 10, Device ID: 0x0100
[   779][D][Zigbee_On_Off_Light.ino:67] setup(): Calling Zigbee.begin()
[   785][D][ZigbeeCore.cpp:94] zigbeeInit(): Initialize Zigbee stack
[   807][D][ZigbeeCore.cpp:101] zigbeeInit(): Register all Zigbee EPs in list
[   816][I][ZigbeeCore.cpp:109] zigbeeInit(): List of registered Zigbee EPs:
[   823][I][ZigbeeCore.cpp:111] zigbeeInit(): Device type: On/Off Light Device, Endpoint: 10, Device ID: 0x0100
=========== After Setup Start ============
[   838][V][ZigbeeCore.cpp:287] esp_zb_app_signal_handler(): ZDO signal: ZDO Config Ready (0x17), status: ESP_FAIL
[   849][I][ZigbeeCore.cpp:179] esp_zb_app_signal_handler(): Zigbee stack initialized
[   860][I][ZigbeeCore.cpp:185] esp_zb_app_signal_handler(): Device started up in  factory-reset mode
[   869][I][ZigbeeCore.cpp:192] esp_zb_app_signal_handler(): Start network steering
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   246640 B ( 240.9 KB)
  Free Bytes        :   190480 B ( 186.0 KB)
  Allocated Bytes   :    50096 B (  48.9 KB)
  Minimum Free Bytes:   190472 B ( 186.0 KB)
  Largest Free Block:   188404 B ( 184.0 KB)
------------------------------------------
GPIO Info:
------------------------------------------
  GPIO : BUS_TYPE[bus/unit][chan]
  --------------------------------------  
     8 : RMT_TX
     9 : GPIO
    23 : UART_RX[0]
    24 : UART_TX[0]
============ After Setup End =============
[  3105][I][ZigbeeCore.cpp:243] esp_zb_app_signal_handler(): Network steering was not successful (status: ESP_FAIL)
[  6344][I][ZigbeeCore.cpp:243] esp_zb_app_signal_handler(): Network steering was not successful (status: ESP_FAIL)

Built using pioarduino with core 3.0.6

@lboue
Copy link
Contributor Author

lboue commented Oct 21, 2024

Can you try it with Arduino IDE?

@Jason2866
Copy link
Collaborator

Nope, don't use ArduinoIDE

@P-R-O-C-H-Y
Copy link
Member

P-R-O-C-H-Y commented Oct 21, 2024 •
edited
Loading

@lboue I did test with Arduino IDE on master, the v3.1 branch and 3.0.6 installed from board manager in the IDE. All versions works fine, no crashes.
Can you try to erase the flash? Maybe that would help.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@P-R-O-C-H-Y P-R-O-C-H-Y

Labels
Status: Awaiting triage Issue is waiting for triage
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@lboue @Jason2866 @VojtechBartoska @P-R-O-C-H-Y