README.md

tel-net-cat scanner

A simple bash script that can scan a target host or a list of target hosts looking for open/closed ports using netcat or telnet.

Usage

	./tel-net-cat-scanner.sh [-t target] [-f target_file] [-p ports] [-o output_format] [-T timeout] [-s scan_tool]

Options

	-t target: Target host or IP address to scan
	-f target_file: File containing a list of targets to scan
	-p ports: Comma-separated list of ports or a range of ports to scan (e.g. 1-3000) (default: 22)
	-o output_format: Output format: csv, xml, json (default: json)
	-T timeout: Timeout value in seconds (default: 1)
	-s scan_tool: Scan tool to use: nc, telnet (default: nc)

Examples

Scan a single target:

	./tel-net-cat-scanner.sh -t 192.168.0.1 -p 22,80,443

Scan multiple targets from a file:

	./tel-net-cat-scanner.sh -f targets.txt -p 1-1024 -o xml

Requirements

The script requires nc (Netcat) or telnet to be installed on the system.

Output

The script outputs the results of the scan in the specified format (csv, xml, or json).

Author

Edgar Medina [email protected]