v1.7.0

[stepansnigirev]

Release notes

• experimental ur:crypto-psbt support ( ur:crypto-psbt support #208 ) - works fine for small and mid-sized transactions, can fail on large txs. Please report in Improve ur:crypto-psbt implementation #209 if you have problems and provide details how it failed
• support for mnemonic export and import including SeedQR format ( 071208a )
• Display of derivation-based address while signing message ( Enhancement: Display of non-legacy addresses and derivation path on message signature screen #203 @moneymanolis )
• [Liquid] support of issuance and reissuance transactions ( Liquid: support issuance and reissuance transactions #201 )
• Other minor changes:
  • signed psbt contains all necessary information for finalization ( it was removing some necessary stuff before to save space )
  • updated docs
  • Nix shell file for easier builds
  • bitcoin was renamed to embit everywhere to avoid confusion

Upgrade process

Copy specter_upgrade_v1.7.0.bin to the SD card and insert it into the device. The bootloader will check the signatures of the upgrade file and update firmware.

Flashing on empty board

If your discovery board is empty or you have very old firmware (below 1.4.0) - connect your board over miniUSB with power jumper set to STLK and copy-paste initial_firmware_v1.7.0.bin file to the mounted drive.

If you have problems flashing initial firmware consider using stlink-tools. A command to flash firmware:

st-flash write path/to/initial_firmware.bin 0x8000000

If you want to use self-signed bootloader and firmware check out the instructions in the bootloader repo

sha256.signed.txt file contains sha256 hashes of the firmware binary files and signed with @stepansnigirev's GPG key.
You can get the public key here: https://stepansnigirev.com/ss-specter-release.asc.
It is also available on keys.openpgp.org.
Fingerprint of the key is 6F16 E354 F833 93D6 E52E C25F 36ED 357A B24B 915F, short id: 36ed357ab24b915f

---

This discussion was created from the release v1.7.0.