Braking testing setup

[berkgokmen14]

When testing the solenoid valve, we want to be able to turn it on or off on command. We discussed last time that this would most likely best done with a relay.

1. Look into if doing this with a relay is the best option. Another option we have is something called a contactor, which is a relay used for higher voltage applications.

2. Create a schematic of the design (can handwrite, draw, do it digitally I don't really care), just so we can clearly see all the connections

3. After schematic, it should be clear what components we need. In a document, add links to what we need to buy to test the valve.