Proform Pro 9000 Unable to transfer data to tiles #3101
Comments
|
I installed the qz companion app using the preferred method #1. I've also tried FTMS Treadmill (not even sure what this is) and toggling ABD Remote on (also not sure what that is). |
|
show me the manual workout screen of your treadmill on the ifit tablet, i need to check the version there |
|
I'd like to eventually upgrade the software to the latest version. It's definitely better than this version. Hopefully that's still possible
|
|
remove the ip completely from the "Proform IP:" and press ok and put instead on the Nordictrack 2950 IP: and press ok and restart qz and share another debug log |
|
It worked! I was able to successfully change speeds and incline through the QZ app. I also was able to connect in Zwift and the speed I set the treadmill to went through to Zwift, however, the incline in Zwift did not update on my treadmill. Is there something else I need to do to enable that? Thank you!!!!! this is very cool |
|
glad it worked, did you set the zwift credentials in qz?
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno sab 25 gen 2025 alle ore 22:11 pcoutri55 ***@***.***>
ha scritto:
… It worked! I was able to successfully change speeds and incline through
the QZ app. I also was able to connect in Zwift and the speed I set the
treadmill to went through to Zwift, however, the incline in Zwift did not
update on my treadmill. Is there something else I need to do to enable that?
Thank you!!!!! this is very cool
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWAQP27EPX6EVELLJF32MP4W7AVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGEYDCMRRGU>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
I did just set my credentials now in QZ app and double checked that my email and password are correct, but it still didn't change the inclination on my treadmill when running a route in zwift. I tried pretty much every option for the inclination toggle and none of them worked. Since I am running Zwift on my laptop and QZ app on my android phone, I think I would need the Zwift Treadmill Auto Inclination "Only for Android and ios" option? Is that correct? |
|
yes that's correct. show me a debug log and I will check your setup |
|
everything is ok on the qz main app side, i mean i can see qz reading the inclination accordingly, but indeed, for example sending 5% to the treadmill, the treadmill doesn't react. are you sure are you able to change inclination from qz manually from the inclination tile? |
|
It looks like I can't change speed or inclination from the QZ app right
now. I know I was able to do that when thing first started working. My iFit
app has updated to the latest release though, could that be the issue? The
manual workout screen is different.
…On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***> wrote:
everything is ok on the qz main app side, i mean i can see qz reading the
inclination accordingly, but indeed, for example sending 5% to the
treadmill, the treadmill doesn't react. are you sure are you able to change
inclination from qz manually from the inclination tile?
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
yes, for sure this is the issue. I always suggest to don't update I fit
after a reset
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
ha scritto:
… It looks like I can't change speed or inclination from the QZ app right
now. I know I was able to do that when thing first started working. My
iFit
app has updated to the latest release though, could that be the issue? The
manual workout screen is different.
On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
wrote:
> everything is ok on the qz main app side, i mean i can see qz reading
the
> inclination accordingly, but indeed, for example sending 5% to the
> treadmill, the treadmill doesn't react. are you sure are you able to
change
> inclination from qz manually from the inclination tile?
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
It automatically updated when I left the treadmill on and walked away for a
few hours. Is there a way to make it work on this new version?
On Sun, Jan 26, 2025, 1:13 PM Roberto Viola ***@***.***>
wrote:
… yes, for sure this is the issue. I always suggest to don't update I fit
after a reset
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
ha scritto:
> It looks like I can't change speed or inclination from the QZ app right
> now. I know I was able to do that when thing first started working. My
> iFit
> app has updated to the latest release though, could that be the issue?
The
> manual workout screen is different.
>
>
>
> On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
> wrote:
>
> > everything is ok on the qz main app side, i mean i can see qz reading
> the
> > inclination accordingly, but indeed, for example sending 5% to the
> > treadmill, the treadmill doesn't react. are you sure are you able to
> change
> > inclination from qz manually from the inclination tile?
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#3101 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO3ADAMNAVPRJVMJBLK2XND2MUQTTAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTIMBYGQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
yes remove internet access from it. I'm doing usually from the router side
if you are able to
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:16 pcoutri55 ***@***.***>
ha scritto:
… It automatically updated when I left the treadmill on and walked away for
a
few hours. Is there a way to make it work on this new version?
On Sun, Jan 26, 2025, 1:13 PM Roberto Viola ***@***.***>
wrote:
> yes, for sure this is the issue. I always suggest to don't update I fit
> after a reset
>
> Roberto Viola
> Software engineer and open source enthusiast
> http://robertoviola.cloud
>
>
>
> Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
> ha scritto:
>
> > It looks like I can't change speed or inclination from the QZ app
right
> > now. I know I was able to do that when thing first started working. My
> > iFit
> > app has updated to the latest release though, could that be the issue?
> The
> > manual workout screen is different.
> >
> >
> >
> > On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
> > wrote:
> >
> > > everything is ok on the qz main app side, i mean i can see qz
reading
> > the
> > > inclination accordingly, but indeed, for example sending 5% to the
> > > treadmill, the treadmill doesn't react. are you sure are you able to
> > change
> > > inclination from qz manually from the inclination tile?
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> >
>
#3101 (comment)>,
>
> >
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
>
> >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#3101 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BO3ADAMNAVPRJVMJBLK2XND2MUQTTAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTIMBYGQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWHVVCJTZSXLQ6K2B732MURA7AVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTKNJSGA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
Am I disconnecting internet temporarily or permanently?
On Sun, Jan 26, 2025, 1:25 PM Roberto Viola ***@***.***>
wrote:
… yes remove internet access from it. I'm doing usually from the router side
if you are able to
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:16 pcoutri55 ***@***.***>
ha scritto:
> It automatically updated when I left the treadmill on and walked away
for
> a
> few hours. Is there a way to make it work on this new version?
>
> On Sun, Jan 26, 2025, 1:13 PM Roberto Viola ***@***.***>
> wrote:
>
> > yes, for sure this is the issue. I always suggest to don't update I
fit
> > after a reset
> >
> > Roberto Viola
> > Software engineer and open source enthusiast
> > http://robertoviola.cloud
> >
> >
> >
> > Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
> > ha scritto:
> >
> > > It looks like I can't change speed or inclination from the QZ app
> right
> > > now. I know I was able to do that when thing first started working.
My
> > > iFit
> > > app has updated to the latest release though, could that be the
issue?
> > The
> > > manual workout screen is different.
> > >
> > >
> > >
> > > On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
> > > wrote:
> > >
> > > > everything is ok on the qz main app side, i mean i can see qz
> reading
> > > the
> > > > inclination accordingly, but indeed, for example sending 5% to the
> > > > treadmill, the treadmill doesn't react. are you sure are you able
to
> > > change
> > > > inclination from qz manually from the inclination tile?
> > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub
> > > > <
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > > or unsubscribe
> > > > <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
>
> >
> > >
> > > > .
> > > > You are receiving this because you authored the thread.Message ID:
> > > > ***@***.***>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> >
>
#3101 (comment)>,
>
> >
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
>
> >
> > > .
> > > You are receiving this because you commented.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#3101 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMNAVPRJVMJBLK2XND2MUQTTAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTIMBYGQ>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWHVVCJTZSXLQ6K2B732MURA7AVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTKNJSGA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO3ADALJXIYTT2KZOBXT5W32MUSDNAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTQNBSHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
For the ifit tablet permanently
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:47 pcoutri55 ***@***.***>
ha scritto:
… Am I disconnecting internet temporarily or permanently?
On Sun, Jan 26, 2025, 1:25 PM Roberto Viola ***@***.***>
wrote:
> yes remove internet access from it. I'm doing usually from the router
side
> if you are able to
>
> Roberto Viola
> Software engineer and open source enthusiast
> http://robertoviola.cloud
>
>
>
> Il giorno dom 26 gen 2025 alle 19:16 pcoutri55 ***@***.***>
> ha scritto:
>
> > It automatically updated when I left the treadmill on and walked away
> for
> > a
> > few hours. Is there a way to make it work on this new version?
> >
> > On Sun, Jan 26, 2025, 1:13 PM Roberto Viola ***@***.***>
> > wrote:
> >
> > > yes, for sure this is the issue. I always suggest to don't update I
> fit
> > > after a reset
> > >
> > > Roberto Viola
> > > Software engineer and open source enthusiast
> > > http://robertoviola.cloud
> > >
> > >
> > >
> > > Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
> > > ha scritto:
> > >
> > > > It looks like I can't change speed or inclination from the QZ app
> > right
> > > > now. I know I was able to do that when thing first started
working.
> My
> > > > iFit
> > > > app has updated to the latest release though, could that be the
> issue?
> > > The
> > > > manual workout screen is different.
> > > >
> > > >
> > > >
> > > > On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
> > > > wrote:
> > > >
> > > > > everything is ok on the qz main app side, i mean i can see qz
> > reading
> > > > the
> > > > > inclination accordingly, but indeed, for example sending 5% to
the
> > > > > treadmill, the treadmill doesn't react. are you sure are you
able
> to
> > > > change
> > > > > inclination from qz manually from the inclination tile?
> > > > >
> > > > > —
> > > > > Reply to this email directly, view it on GitHub
> > > > > <
> > > >
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > >
> > > > > or unsubscribe
> > > > > <
> > > >
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
>
> >
> > >
> > > >
> > > > > .
> > > > > You are receiving this because you authored the thread.Message
ID:
> > > > > ***@***.***>
> > > > >
> > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub
> > > > <
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > > or unsubscribe
> > > > <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
>
> >
> > >
> > > > .
> > > > You are receiving this because you commented.Message ID:
> > > > ***@***.***>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> >
>
#3101 (comment)>,
>
> >
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMNAVPRJVMJBLK2XND2MUQTTAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTIMBYGQ>
>
> >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#3101 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAALYWHVVCJTZSXLQ6K2B732MURA7AVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTKNJSGA>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BO3ADALJXIYTT2KZOBXT5W32MUSDNAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTQNBSHE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWCCJVQYC6R5QUCKJYD2MUUTXAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGU2DKMBXGU>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
Yeah, I'm not going to do that. I have a friend who uses the iFit app. It's
not a big deal, but it would be a nice feature. Thanks for helping me out.
I'll periodically check back and see if an update to QZ supports the new
iFit software. Cheers!
On Sun, Jan 26, 2025, 1:52 PM Roberto Viola ***@***.***>
wrote:
… For the ifit tablet permanently
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 26 gen 2025 alle 19:47 pcoutri55 ***@***.***>
ha scritto:
> Am I disconnecting internet temporarily or permanently?
>
> On Sun, Jan 26, 2025, 1:25 PM Roberto Viola ***@***.***>
> wrote:
>
> > yes remove internet access from it. I'm doing usually from the router
> side
> > if you are able to
> >
> > Roberto Viola
> > Software engineer and open source enthusiast
> > http://robertoviola.cloud
> >
> >
> >
> > Il giorno dom 26 gen 2025 alle 19:16 pcoutri55 ***@***.***>
> > ha scritto:
> >
> > > It automatically updated when I left the treadmill on and walked
away
> > for
> > > a
> > > few hours. Is there a way to make it work on this new version?
> > >
> > > On Sun, Jan 26, 2025, 1:13 PM Roberto Viola ***@***.***>
> > > wrote:
> > >
> > > > yes, for sure this is the issue. I always suggest to don't update
I
> > fit
> > > > after a reset
> > > >
> > > > Roberto Viola
> > > > Software engineer and open source enthusiast
> > > > http://robertoviola.cloud
> > > >
> > > >
> > > >
> > > > Il giorno dom 26 gen 2025 alle 19:04 pcoutri55 ***@***.***>
> > > > ha scritto:
> > > >
> > > > > It looks like I can't change speed or inclination from the QZ
app
> > > right
> > > > > now. I know I was able to do that when thing first started
> working.
> > My
> > > > > iFit
> > > > > app has updated to the latest release though, could that be the
> > issue?
> > > > The
> > > > > manual workout screen is different.
> > > > >
> > > > >
> > > > >
> > > > > On Sun, Jan 26, 2025, 12:28 PM Roberto Viola ***@***.***>
> > > > > wrote:
> > > > >
> > > > > > everything is ok on the qz main app side, i mean i can see qz
> > > reading
> > > > > the
> > > > > > inclination accordingly, but indeed, for example sending 5% to
> the
> > > > > > treadmill, the treadmill doesn't react. are you sure are you
> able
> > to
> > > > > change
> > > > > > inclination from qz manually from the inclination tile?
> > > > > >
> > > > > > —
> > > > > > Reply to this email directly, view it on GitHub
> > > > > > <
> > > > >
> > > >
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > >
> > > > >
> > > > > > or unsubscribe
> > > > > > <
> > > > >
> > > >
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMBCI7QXPV52LZUOX32MULMBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUYTMNJTGY>
>
> >
> > >
> > > >
> > > > >
> > > > > > .
> > > > > > You are receiving this because you authored the thread.Message
> ID:
> > > > > > ***@***.***>
> > > > > >
> > > > >
> > > > > —
> > > > > Reply to this email directly, view it on GitHub
> > > > > <
> > > >
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > >
> > > > > or unsubscribe
> > > > > <
> > > >
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AAALYWEEMH42RNDCI4FXC332MUPSLAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTAOBSGM>
>
> >
> > >
> > > >
> > > > > .
> > > > > You are receiving this because you commented.Message ID:
> > > > > ***@***.***>
> > > > >
> > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub
> > > > <
> > >
> >
>
#3101 (comment)>,
>
> >
> > >
> > > > or unsubscribe
> > > > <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/BO3ADAMNAVPRJVMJBLK2XND2MUQTTAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTIMBYGQ>
>
> >
> > >
> > > > .
> > > > You are receiving this because you authored the thread.Message ID:
> > > > ***@***.***>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> >
>
#3101 (comment)>,
>
> >
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/AAALYWHVVCJTZSXLQ6K2B732MURA7AVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTKNJSGA>
>
> >
> > > .
> > > You are receiving this because you commented.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#3101 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BO3ADALJXIYTT2KZOBXT5W32MUSDNAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGUZTQNBSHE>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#3101 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWCCJVQYC6R5QUCKJYD2MUUTXAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGU2DKMBXGU>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO3ADANGSWTOOWDJ5VC3RQL2MUVGBAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGU2DMNRRG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Ifit is blocking more and more the system so for sure it will be even worst Anyway at least you have now way to send metrics on zwift! |
|
Yeah, it's still worth it! Thanks for all your help. I really appreciate it.
…On Sun, Jan 26, 2025, 2:22 PM Roberto Viola ***@***.***> wrote:
Ifit is blocking more and more the system so for sure it will be even worst
Anyway at least you have now way to send metrics on zwift!
—
Reply to this email directly, view it on GitHub
<#3101 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BO3ADALRRQRA6TBKKRT4ATT2MUYYFAVCNFSM6AAAAABV3VIDG2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJUGU2TMNBSGI>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
If you could, please rate the app and the support on the store, it means a lot to me |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I am unable to get my Proform Pro 9000 to transmit data during a manual activity to my QZ app on my phone. I have tried every single NordicTrac and Proform option in the app (because there is no Proform Pro 9000 option) and put the correct IP address in both the Proform and NordicTrac locations. I followed all the steps to get the companion app on my treadmill (and selected Proform Pro 9000 on the companion app).
Attached is the log file from the QZ app on my phone and the dump file from the companion app, if needed.
debug-Sat_Jan_25_14_52_52_2025.log
logcat.log
The text was updated successfully, but these errors were encountered: