This repository contains a current prototype draft for the FMI Layered Standard Network Communication (fmi-ls-bus) based on the Functional Mock-up Interface 3.0 standard for the exchange of simulation models. Note that this draft is being worked on actively, and thus are subject to change without notice.
This is currently not normative, nor is this document to be considered officially endorsed by the Modelica Association or other involved organisations prior to official adoption.
The FMI 3.0 Layered Standard Network Communication is currently maintained on GitHub and is based on the FMI standard. The current state of development is published here and contains all bus types that are currently in development or are already final. Official releases are directly published via GitHub.
Looking forwared to our joint presentation and demo "FMI, Layered Standards and ASAM Standards - Enabling Seamless SiL Simulation of Virtual ECUs" from the FMI Project at the coming ASAM International Conference, 2024 in Munich. You can meet us also at the ModelicaAssociation booth there!
We will present three new layered standards for simulating virtual ECUs with FMI 3.0:
- FMI-LS-XCP for measurement & calibration with XCP
- FMI-LS-BUS for simulation of network communication with CAN, CAN FD CAN XL, FlexRay, Ethernet, LIN
- FMI-LS-STRUCT for structured entities like lookup tables
A demo from tool vendors (Akkodis, Altair, AVL, Bosch, dSPACE, PMSF, SYNOPSYS) illustrates the interoperability of these layered standards.
Looking forward to meet you in Munich! More information on the conference: https://lnkd.in/e-A9Affz
Different abstraction layers and types of buses are developed in different versions that build on each other. Corresponding milestones and a detailed roadmap have been defined for this purpose. The following graphic provides an overview of the planned sequence of supported bus systems:
A detailed roadmap showing completed, current and future work can be accessed here.
docs-- Sources of the specification documentheaders-- Header files of the C-APIschema-- XSD schema for this FMI Layeredtests-- Contains unit tests for the provided header files
To help you get started, we provide introductory chapters. The following resources are currently available:
Demo FMUs are available within the FMI LS Bus Implementers' Guide to illustrate how to use and implement the fmi-ls bus. More demos will be added iteratively in the near future. See also the overview pages for the demos, categorized by the different supported bus types of the fmi-ls-bus.
The FMI LS Bus Implementers' Guide is a free resource intended to give non-normative recommendations and guidance to implementers of the Functional Mock-up Interface Layered Standard Network Communication (FMI-LS-BUS).
The following list shows importers and exporters that currently support the FMI-LS-BUS layered standard and that have been validated by a cross-check. It should be noted that tool implementations in some cases might be experimental, because the FMI-LS-BUS layered standard is currently not in a finale state. Feel free to contact the specified tool vendors if you are interested in using the FMI-LS-BUS layered standard. Additionally, any FMU importer that supports the necessary FMI 3.0 features, such as clocks and binary variables, has generic FMI-LS-BUS support and can be used.
| Name | Type | Features | Remarks |
|---|---|---|---|
| Altair Twin Activate | Importer |      |
Fmi3-Terminals are not supported |
| AVL FMU Sim | Importer | |
- |
| dSPACE SystemDesk | Exporter | |
- |
| dSPACE VEOS | Importer |  |
- |
| Synopsys Silver | Importer | |
- |
Code and documentation copyright (C) 2023-2024 The Modelica Association Project FMI. Code released under the 2-Clause BSD License. Docs released under Attribution-ShareAlike 4.0 International.
If you are interested in the FMI Layered Standard for Network Communication, the fmi-ls-xcp could also be relevant to you. The fmi-ls-xcp specifies an FMI extension for using the XCP protocol and A2L variable description within FMUs.