signage

Firmware for B4CKSP4CE signage in openspace based on ESP32 and ~~some voodoo magic~~ shift registers

To build the project you also require to create src/secrets.h with defines for:

#define SECRET_WIFI_PASSWORD "wifipassword" // wifi password
#define SECRET_MQTT_PASSWORD "mqttpassword" // mqtt password

Also probably you need to change the WIFI_SSID and MQTT_* defines in src/mcu_config.h for your specific environment.

If you need to add or edit protocol messages you should run setup.py in EmbeddedProto directory and run:

protoc --plugin=protoc-gen-eams=EmbeddedProto/protoc-gen-eams -I=src/protocol/source/ --eams_out=src/protocol/compiled/ src/protocol/source/messages.proto