Software grabber on Kubuntu 22.04.1 LTS #333

hkalle · 2022-09-05T09:42:14Z

hkalle
Sep 5, 2022

Hello Awawa

I have installed HyperHDR 18.0.0.0 on a fresh Kubuntu 22.04.1 LTS and would like to use the software grabber.

Since I am running on Xorg I am wondering, why the X11 software screen grabber is not available/supported by the operation system. Is that correct?
Instead I tried to use the framebuffer on /dev/fb0, but it only gives back a steady picture from a console. I checked it with fbgrab. Is there anything I have to activate, to make the framebuffer working correctly?

As always thanks a lot for your support.

Please find my logs attached.

2022-09-05T09:38:57.281Z [MAIN] Database path: '/home/d023552/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled
2022-09-05T09:38:57.281Z [MAIN] Starting HyperHdr - 18.0.0.0, (HEAD detached at 1c31205) (Awawa-e327d52/1c31205-1661084784), built: Aug 21 2022:13:52:17
2022-09-05T09:38:57.281Z [MAIN] Set user data path to '/home/d023552/.hyperhdr'
2022-09-05T09:38:57.283Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T09:38:57.310Z [SETTINGSMGR] Settings database initialized
2022-09-05T09:38:57.310Z [HYPERHDR] Sound device is disabled
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Restarting video grabber is now blocked due to reloading of the configuration
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T09:38:57.322Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:75) CEC keycode. Start: 0, stop: 0
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:145) Set new width: 720, height: 480 for capture
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:322) setWidthHeight preparing to restarting video grabber 0
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the capturing resolution
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the framerate
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:259) setBrightnessContrastSaturationHue nothing changed
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (V4L2Grabber.cpp:125) setHdrToneMappingMode to: Disabled
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:168) setFpsSoftwareDecimation to: 1
2022-09-05T09:38:57.322Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-09-05T09:38:57.322Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2022-09-05T09:38:57.322Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:383) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'USB Video: USB Video (video0)'
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of selected device
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] (Grabber.cpp:186) Force encoding to: yuyv (old: NO_CHANGE)
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the video encoding format
2022-09-05T09:38:57.322Z [V4L2:USB VIDEO: USB] setQFrameDecimation is now: enabled
2022-09-05T09:38:57.322Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:545) Frame cache is: enabled
2022-09-05T09:38:57.323Z [PIPEWIRE_SYSTEM:/DEV/FB0] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T09:38:57.323Z [PIPEWIRE_SYSTEM:/DEV/FB0] Loaded Pipewire proxy library for screen capturing
2022-09-05T09:38:57.323Z [DAEMON] The system doesn't support the Pipewire/Portal grabber
2022-09-05T09:38:57.323Z [X11_SYSTEM:/DEV/FB0] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T09:38:57.324Z [X11_SYSTEM:/DEV/FB0] Loaded X11 proxy library for screen capturing
2022-09-05T09:38:57.324Z [DAEMON] The system doesn't support the X11 grabber
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Found FrameBuffer device: /dev/fb0
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Restarting video grabber is now blocked due to reloading of the configuration
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] (Grabber.cpp:145) Set new width: 512, height: 512 for capture
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] (Grabber.cpp:322) setWidthHeight preparing to restarting video grabber 0
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Delayed restart of the grabber due to change of the capturing resolution
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Delayed restart of the grabber due to change of the framerate
2022-09-05T09:38:57.324Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-09-05T09:38:57.324Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: '/dev/fb0'
2022-09-05T09:38:57.324Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Delayed restart of the grabber due to change of selected device
2022-09-05T09:38:57.333Z [SETTINGSMGR] Settings database initialized
2022-09-05T09:38:57.334Z [BLACKBORDER] Set mode to: default
2022-09-05T09:38:57.334Z [COMPONENTREG0] Blackborder detector: enabled
2022-09-05T09:38:57.334Z [IMAGETOLED0] (ImageProcessor.cpp:163) Set LED mapping type to weighted
2022-09-05T09:38:57.334Z [IMAGETOLED0] (ImageProcessor.cpp:147) setSparseProcessing to 0
2022-09-05T09:38:57.334Z [RGB_TRANSFORM0] RGB transform classic_config: 0, saturationGain: 1.000000, luminanceGain: 1.000000, backlightThreshold: 0
2022-09-05T09:38:57.334Z [ADJUST_RED0] Set correction to 255
2022-09-05T09:38:57.334Z [ADJUST_BLUE0] Set correction to 255
2022-09-05T09:38:57.334Z [ADJUST_GREEN0] Set correction to 255
2022-09-05T09:38:57.344Z [JSONSERVER] (JsonServer.cpp:24) Created instance
2022-09-05T09:38:57.344Z [JSONSERVER] Started on port 19444
2022-09-05T09:38:57.349Z [PIPEWIRE_SYSTEM:/dev/fb0] (SystemWrapper.cpp:75) Closing grabber: PIPEWIRE_SYSTEM:/dev/fb0
2022-09-05T09:38:57.349Z [X11_SYSTEM:/dev/fb0] (SystemWrapper.cpp:75) Closing grabber: X11_SYSTEM:/dev/fb0
2022-09-05T09:38:57.335Z [HYPERHDR0] Led strip RGB order is: rgb
2022-09-05T09:38:57.335Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T09:38:57.344Z [FLATBUFSERVER] Started on port 19400
2022-09-05T09:38:57.345Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
2022-09-05T09:38:57.345Z [PROTOSERVER] Started on port 19445
2022-09-05T09:38:57.345Z [WEBSERVER] Initialize Webserver
2022-09-05T09:38:57.345Z [WEBSERVER] Initialize Webserver
2022-09-05T09:38:57.350Z [WEBSERVER] Apply Webserver settings
2022-09-05T09:38:57.350Z [WEBSERVER] Apply Webserver settings
2022-09-05T09:38:57.350Z [WEBSERVER] Set document root to: :/webconfig
2022-09-05T09:38:57.350Z [WEBSERVER] Set document root to: :/webconfig
2022-09-05T09:38:57.350Z [WEBSERVER] Started on port 8090 name 'HyperHDR Webserver'
2022-09-05T09:38:57.351Z [WEBSERVER] Setup SSL certificate
2022-09-05T09:38:57.351Z [WEBSERVER] Setup private SSL key
2022-09-05T09:38:57.351Z [WEBSERVER] Started on port 8092 name 'HyperHDR Webserver'
2022-09-05T09:38:57.354Z [SMOOTHING0] Clearing queued colors before: enabling
2022-09-05T09:38:57.354Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T09:38:57.354Z [COMPONENTREG0] Smoothing: enabled
2022-09-05T09:38:57.354Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T09:38:57.354Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-09-05T09:38:57.354Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T09:38:57.354Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T09:38:57.355Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] Start LedDevice 'wled'.
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:51)
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled-SamsungTV","maxRetry":60,"refreshTime":0,"type":"wled"}]
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:59) DeviceType : wled
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:60) LedCount : 302
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:63) Max retry : 60
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:105)
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:116) [1]
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled-SamsungTV","maxRetry":60,"port":19446,"refreshTime":0,"type":"wled"}]
2022-09-05T09:38:57.355Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-09-05T09:38:57.356Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 254
2022-09-05T09:38:57.356Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-09-05T09:38:57.356Z [MUXER0] Register new input 'System/EFFECT' with priority 254 as inactive
2022-09-05T09:38:57.356Z [HYPERHDR] Initial background effect 'Rainbow swirl fast' started
2022-09-05T09:38:57.356Z [MUXER0] Register new input 'System/SYSTEMGRABBER' with priority 245 as inactive
2022-09-05T09:38:57.356Z [COMPONENTREG0] System capture device: enabled
2022-09-05T09:38:57.356Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] (FrameBufGrabber.cpp:99) init
2022-09-05T09:38:57.356Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] *************************************************************************************************
2022-09-05T09:38:57.357Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Starting FrameBuffer grabber. Selected: '/dev/fb0' (0) max width: 512 (512) @ 25 fps
2022-09-05T09:38:57.357Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] *************************************************************************************************
2022-09-05T09:38:57.357Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Device '/dev/fb0' is using currently 3840x2160x32 resolution.
2022-09-05T09:38:57.357Z [FRAMEBUFFER_SYSTEM:/DEV/FB0] Started
2022-09-05T09:38:57.356Z [BOBLIGHT] Instance created
2022-09-05T09:38:57.357Z [HYPERMANAGER] HyperHDR instance 'Samsung TV' has been started
2022-09-05T09:38:57.357Z [DAEMON] Unload CEC
2022-09-05T09:38:57.357Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 254
2022-09-05T09:38:57.357Z [MUXER0] Priority 254 is now active
2022-09-05T09:38:57.357Z [MUXER0] Set visible priority to 254
2022-09-05T09:38:57.357Z [IMAGETOLED0] Total index number is: 1208 (memory: 1208). User sparse processing is: disabled, image size: 80 x 45, area number: 302
2022-09-05T09:38:57.358Z [IMAGETOLED0] Total index number is: 1208 (memory: 1208). User sparse processing is: disabled, image size: 80 x 45, area number: 302
2022-09-05T09:38:57.358Z [HYPERHDR0] New priority[254], previous [255]
2022-09-05T09:38:57.358Z [HYPERHDR0] New source available -> switch LED-Device on
2022-09-05T09:38:57.358Z [SMOOTHING0] Clearing queued colors before: enabling
2022-09-05T09:38:57.358Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (ProviderUdp.cpp:77) Successfully resolved IP-address (192.168.53.41) for hostname (wled-SamsungTV).
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (ProviderUdp.cpp:99) UDP socket will write to 192.168.53.41:19446
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:94) Hostname/IP : wled-SamsungTV
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:95) Port : 19446
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:99) [1]
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDevice.cpp:102) Enable device
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDevice.cpp:310) Switch on
2022-09-05T09:38:57.358Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:128)
2022-09-05T09:38:57.358Z [LEDDEVICE] (ProviderRestApi.cpp:165) PUT: [http://wled-samsungtv/json/state] [{"on":true,"live":true}]
2022-09-05T09:38:57.434Z [LEDDEVICE] (ProviderRestApi.cpp:194) PUT exit: [http://wled-samsungtv/json/state] [{"on":true,"live":true}]
2022-09-05T09:38:57.435Z [LEDDEVICE] (ProviderRestApi.cpp:383) Reply.httpStatusCode [200]
2022-09-05T09:38:57.435Z [LEDDEVICE_WLED] (LedDevice.cpp:102) Enable device
2022-09-05T09:38:57.435Z [COMPONENTREG0] LED device: enabled
2022-09-05T09:38:57.435Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0
2022-09-05T09:38:57.435Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-09-05T09:38:57.435Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive
2022-09-05T09:38:57.435Z [HYPERHDR] Initial foreground effect 'Rainbow swirl fast' started
2022-09-05T09:38:57.435Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-09-05T09:38:57.435Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-09-05T09:38:57.435Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T09:38:57.435Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-09-05T09:38:57.435Z [SMOOTHING0] Using linear smoothing input (2)
2022-09-05T09:38:57.436Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0
2022-09-05T09:38:57.436Z [MUXER0] Priority 0 is now active
2022-09-05T09:38:57.436Z [MUXER0] Set visible priority to 0
2022-09-05T09:38:57.436Z [HYPERHDR0] New priority[0], previous [254]
2022-09-05T09:38:57.438Z [MUXER0] Priority 245 is now active
2022-09-05T09:38:57.476Z [SMOOTHING0] Using linear smoothing procedure (2)
2022-09-05T09:38:59.361Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from 2a02:908:1216:9f60:5550:12f8:d173:c8af
2022-09-05T09:38:59.361Z [WEBSOCKET] (JsonAPI.cpp:96) Client '2a02:908:1216:9f60:5550:12f8:d173:c8af' switch to HyperHDR instance 0
2022-09-05T09:38:59.451Z [EFFECT0(Rainbo...)] The effect quits with priority: 0
2022-09-05T09:38:59.451Z [MUXER0] Removed source priority 0
2022-09-05T09:38:59.451Z [MUXER0] Set visible priority to 245
2022-09-05T09:38:59.452Z [IMAGETOLED0] Total index number is: 34080 (memory: 34080). User sparse processing is: disabled, image size: 480 x 270, area number: 302
2022-09-05T09:38:59.452Z [HYPERHDR0] New priority[245], previous [0]
2022-09-05T09:38:59.452Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
2022-09-05T09:38:59.452Z [EFFECT0(Rainbo...)] Deleting effect named: 'Rainbow swirl fast'
2022-09-05T09:38:59.452Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted
2022-09-05T09:38:59.452Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-09-05T09:38:59.452Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T09:38:59.452Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T09:38:59.452Z [SMOOTHING0] Using alternative smoothing input (0)
2022-09-05T09:38:59.473Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-09-05T09:38:59.574Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T09:38:59.957Z [WEBSOCKET] (JsonAPI.cpp:1258) log streaming activated for client 2a02:908:1216:9f60:5550:12f8:d173:c8af
2022-09-05T09:39:23.711Z [IMAGETOLED0] Total index number is: 34080 (memory: 34080). User sparse processing is: disabled, image size: 480 x 270, area number: 302

awawa-dev · 2022-09-05T10:50:51Z

awawa-dev
Sep 5, 2022
Maintainer

Hi
Just to make sure: HyperHDR isn't running as a system service because it won't have an access to xorg in this case? Must be started by a logged-in user instead, for example using the menu shortcut.

0 replies

hkalle · 2022-09-05T12:35:14Z

hkalle
Sep 5, 2022
Author

Hi
thanks for the hint. In the scenario described I started the service directly from a terminal. On Arch Linux that worked, as I remember.
Now it becomes interesting. I started HyperHDR by the command line" /usr/bin/hyperhdr" and now it is trying to use "PipewireGrabber", which I thought was implemented for Wayland.

My logs:

2022-09-05T12:33:00.493Z [MAIN] Database path: '/home/d023552/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled
2022-09-05T12:33:00.493Z [MAIN] Starting HyperHdr - 18.0.0.0, (HEAD detached at 1c31205) (Awawa-e327d52/1c31205-1661084784), built: Aug 21 2022:13:52:17
2022-09-05T12:33:00.493Z [MAIN] Set user data path to '/home/d023552/.hyperhdr'
2022-09-05T12:33:00.494Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T12:33:00.517Z [SETTINGSMGR] Settings database initialized
2022-09-05T12:33:00.517Z [HYPERHDR] Sound device is disabled
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Restarting video grabber is now blocked due to reloading of the configuration
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T12:33:00.524Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:75) CEC keycode. Start: 0, stop: 0
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:145) Set new width: 720, height: 480 for capture
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:322) setWidthHeight preparing to restarting video grabber 0
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the capturing resolution
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the framerate
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:259) setBrightnessContrastSaturationHue nothing changed
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (V4L2Grabber.cpp:125) setHdrToneMappingMode to: Disabled
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:168) setFpsSoftwareDecimation to: 1
2022-09-05T12:33:00.524Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-09-05T12:33:00.524Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2022-09-05T12:33:00.524Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:383) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'USB Video: USB Video (video0)'
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of selected device
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] (Grabber.cpp:186) Force encoding to: yuyv (old: NO_CHANGE)
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] Delayed restart of the grabber due to change of the video encoding format
2022-09-05T12:33:00.524Z [V4L2:USB VIDEO: USB] setQFrameDecimation is now: enabled
2022-09-05T12:33:00.524Z [V4L2:USB Video: USB] (GrabberWrapper.cpp:545) Frame cache is: enabled
2022-09-05T12:33:00.524Z [PIPEWIRE_SYSTEM:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-09-05T12:33:00.525Z [PIPEWIRE_SYSTEM:AUTO] Loaded Pipewire proxy library for screen capturing
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] (Grabber.cpp:145) Set new width: 512, height: 512 for capture
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] (Grabber.cpp:322) setWidthHeight preparing to restarting video grabber 0
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] Delayed restart of the grabber due to change of the capturing resolution
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] Delayed restart of the grabber due to change of the framerate
2022-09-05T12:33:00.529Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-09-05T12:33:00.529Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {0, 0, 0} and frames: 50
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
2022-09-05T12:33:00.529Z [PIPEWIRE_SYSTEM:AUTO] Delayed restart of the grabber due to change of selected device
2022-09-05T12:33:00.540Z [SETTINGSMGR] Settings database initialized
2022-09-05T12:33:00.541Z [BLACKBORDER] Set mode to: default
2022-09-05T12:33:00.541Z [COMPONENTREG0] Blackborder detector: enabled
2022-09-05T12:33:00.541Z [IMAGETOLED0] (ImageProcessor.cpp:163) Set LED mapping type to weighted
2022-09-05T12:33:00.541Z [IMAGETOLED0] (ImageProcessor.cpp:147) setSparseProcessing to 0
2022-09-05T12:33:00.541Z [RGB_TRANSFORM0] RGB transform classic_config: 0, saturationGain: 1.000000, luminanceGain: 1.000000, backlightThreshold: 0
2022-09-05T12:33:00.542Z [ADJUST_RED0] Set correction to 255
2022-09-05T12:33:00.542Z [ADJUST_BLUE0] Set correction to 255
2022-09-05T12:33:00.542Z [ADJUST_GREEN0] Set correction to 255
2022-09-05T12:33:00.549Z [JSONSERVER] (JsonServer.cpp:24) Created instance
2022-09-05T12:33:00.549Z [JSONSERVER] Started on port 19444
2022-09-05T12:33:00.553Z [MAIN] start systray
2022-09-05T12:33:00.542Z [HYPERHDR0] Led strip RGB order is: rgb
2022-09-05T12:33:00.543Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T12:33:00.549Z [FLATBUFSERVER] Started on port 19400
2022-09-05T12:33:00.549Z [PROTOSERVER] Started on port 19445
2022-09-05T12:33:00.549Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
2022-09-05T12:33:00.549Z [WEBSERVER] Initialize Webserver
2022-09-05T12:33:00.550Z [WEBSERVER] Initialize Webserver
2022-09-05T12:33:00.552Z [SMOOTHING0] Clearing queued colors before: enabling
2022-09-05T12:33:00.552Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T12:33:00.552Z [COMPONENTREG0] Smoothing: enabled
2022-09-05T12:33:00.552Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T12:33:00.552Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-09-05T12:33:00.552Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T12:33:00.552Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T12:33:00.552Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 100ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 5, antiFlickTime: 500
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] Start LedDevice 'wled'.
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:51)
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled-SamsungTV","maxRetry":60,"refreshTime":0,"type":"wled"}]
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:59) DeviceType : wled
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:60) LedCount : 302
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:63) Max retry : 60
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:105)
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:116) [1]
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":302,"hardwareLedCount":302,"host":"wled-SamsungTV","maxRetry":60,"port":19446,"refreshTime":0,"type":"wled"}]
2022-09-05T12:33:00.553Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-09-05T12:33:00.554Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 254
2022-09-05T12:33:00.554Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-09-05T12:33:00.554Z [MUXER0] Register new input 'System/EFFECT' with priority 254 as inactive
2022-09-05T12:33:00.554Z [HYPERHDR] Initial background effect 'Rainbow swirl fast' started
2022-09-05T12:33:00.554Z [WEBSERVER] Apply Webserver settings
2022-09-05T12:33:00.554Z [WEBSERVER] Apply Webserver settings
2022-09-05T12:33:00.554Z [WEBSERVER] Set document root to: :/webconfig
2022-09-05T12:33:00.554Z [WEBSERVER] Set document root to: :/webconfig
2022-09-05T12:33:00.554Z [WEBSERVER] Started on port 8090 name 'HyperHDR Webserver'
2022-09-05T12:33:00.555Z [MUXER0] Register new input 'System/SYSTEMGRABBER' with priority 245 as inactive
2022-09-05T12:33:00.555Z [COMPONENTREG0] System capture device: enabled
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] (PipewireGrabber.cpp:162) init
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] (PipewireGrabber.cpp:181) Forcing auto discovery device
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] (PipewireGrabber.cpp:186) Auto discovery set to Pipewire System Dialog selection
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] *************************************************************************************************
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] Starting Pipewire grabber. Selected: 'Pipewire System Dialog selection' (1) max width: 512 (512) @ 25 fps
2022-09-05T12:33:00.557Z [PIPEWIRE_SYSTEM:AUTO] *************************************************************************************************
2022-09-05T12:33:00.560Z [PIPEWIRE_SYSTEM:AUTO] Started
2022-09-05T12:33:00.555Z [BOBLIGHT] Instance created
2022-09-05T12:33:00.560Z [HYPERMANAGER] HyperHDR instance 'Samsung TV' has been started
2022-09-05T12:33:00.560Z [DAEMON] Unload CEC
2022-09-05T12:33:00.555Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 254
2022-09-05T12:33:00.556Z [WEBSERVER] Setup SSL certificate
2022-09-05T12:33:00.556Z [MUXER0] Priority 254 is now active
2022-09-05T12:33:00.556Z [MUXER0] Set visible priority to 254
2022-09-05T12:33:00.556Z [WEBSERVER] Setup private SSL key
2022-09-05T12:33:00.556Z [IMAGETOLED0] Total index number is: 1208 (memory: 1208). User sparse processing is: disabled, image size: 80 x 45, area number: 302
2022-09-05T12:33:00.556Z [WEBSERVER] Started on port 8092 name 'HyperHDR Webserver'
2022-09-05T12:33:00.556Z [IMAGETOLED0] Total index number is: 1208 (memory: 1208). User sparse processing is: disabled, image size: 80 x 45, area number: 302
2022-09-05T12:33:00.556Z [HYPERHDR0] New priority[254], previous [255]
2022-09-05T12:33:00.556Z [HYPERHDR0] New source available -> switch LED-Device on
2022-09-05T12:33:00.556Z [SMOOTHING0] Clearing queued colors before: enabling
2022-09-05T12:33:00.556Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (ProviderUdp.cpp:77) Successfully resolved IP-address (192.168.53.41) for hostname (wled-SamsungTV).
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (ProviderUdp.cpp:99) UDP socket will write to 192.168.53.41:19446
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:94) Hostname/IP : wled-SamsungTV
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:95) Port : 19446
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:99) [1]
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDevice.cpp:102) Enable device
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDevice.cpp:310) Switch on
2022-09-05T12:33:00.561Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:128)
2022-09-05T12:33:00.561Z [LEDDEVICE] (ProviderRestApi.cpp:165) PUT: [http://wled-samsungtv/json/state] [{"on":true,"live":true}]
2022-09-05T12:33:00.644Z [LEDDEVICE] (ProviderRestApi.cpp:194) PUT exit: [http://wled-samsungtv/json/state] [{"on":true,"live":true}]
2022-09-05T12:33:00.644Z [LEDDEVICE] (ProviderRestApi.cpp:383) Reply.httpStatusCode [200]
2022-09-05T12:33:00.644Z [LEDDEVICE_WLED] (LedDevice.cpp:102) Enable device
2022-09-05T12:33:00.644Z [COMPONENTREG0] LED device: enabled
2022-09-05T12:33:00.645Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0
2022-09-05T12:33:00.645Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-09-05T12:33:00.645Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive
2022-09-05T12:33:00.645Z [HYPERHDR] Initial foreground effect 'Rainbow swirl fast' started
2022-09-05T12:33:00.645Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-09-05T12:33:00.645Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-09-05T12:33:00.645Z [SMOOTHING0] Smoothing queue is cleared
2022-09-05T12:33:00.645Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-09-05T12:33:00.645Z [SMOOTHING0] Using linear smoothing input (2)
2022-09-05T12:33:00.645Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0
2022-09-05T12:33:00.645Z [MUXER0] Priority 0 is now active
2022-09-05T12:33:00.645Z [MUXER0] Set visible priority to 0
2022-09-05T12:33:00.645Z [HYPERHDR0] New priority[0], previous [254]
2022-09-05T12:33:00.646Z [PIPEWIRE_SYSTEM:AUTO] Portal protocol version: 4
2022-09-05T12:33:00.646Z [PIPEWIRE_SYSTEM:AUTO] Could not capture pipewire frame: Pipewire: Failed to create session: 2
2022-09-05T12:33:00.647Z [PIPEWIRE_SYSTEM:AUTO] Stopped
2022-09-05T12:33:00.647Z [PIPEWIRE_SYSTEM:AUTO] (PipewireGrabber.cpp:153) Uninit grabber: Pipewire System Dialog selection
2022-09-05T12:33:00.685Z [SMOOTHING0] Using linear smoothing procedure (2)
2022-09-05T12:33:02.648Z [EFFECT0(Rainbo...)] The effect quits with priority: 0
2022-09-05T12:33:02.648Z [MUXER0] Removed source priority 0
2022-09-05T12:33:02.648Z [MUXER0] Set visible priority to 254
2022-09-05T12:33:02.648Z [HYPERHDR0] New priority[254], previous [0]
2022-09-05T12:33:02.648Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
2022-09-05T12:33:02.649Z [EFFECT0(Rainbo...)] Deleting effect named: 'Rainbow swirl fast'
2022-09-05T12:33:02.649Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted
2022-09-05T12:33:07.108Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:127.0.0.1
2022-09-05T12:33:07.108Z [WEBSOCKET] (JsonAPI.cpp:96) Client '::ffff:127.0.0.1' switch to HyperHDR instance 0
2022-09-05T12:33:07.247Z [DB] Database opened: /home/d023552/.hyperhdr/db/hyperhdr.db
2022-09-05T12:33:08.878Z [WEBSOCKET] (JsonAPI.cpp:1258) log streaming activated for client ::ffff:127.0.0.1

0 replies

awawa-dev · 2022-09-05T12:45:39Z

awawa-dev
Sep 5, 2022
Maintainer

I strongly suggest starting HyperHDR from the menu (or adding it to User Autostart). The Wayland / pipewire grabber is different from the x11 or framegrabber: there is a very strong security approach when creating sessions, which is failing for you. Usually, you will be asked to grant HyperHDR the screen capture permission and need to select the display to capture. This system dialog is handled automatically by portal routines when HyperHDR tries to create a capture session. I tested it few months ago on Arch with gnome and it worked fine. The portal implementation may vary depending on the desktop environment: for example for KDE it's a completely different development branch.

0 replies

awawa-dev · 2022-09-05T13:23:27Z

awawa-dev
Sep 5, 2022
Maintainer

Portal is only 'frontend' for Pipewire that helps to create a capturing session. I think pipewire is capable of capturing x11 session also.

0 replies

hkalle · 2022-09-05T13:58:19Z

hkalle
Sep 5, 2022
Author

I started HyperHDR from the menu and still got the message:

"In order to use the 'pipewire/portal' system grabber HyperHDR must be run as the application, launching as a service/daemon will fail".

Does the user need any special access rights? Thanks.

0 replies

awawa-dev · 2022-09-05T14:57:21Z

awawa-dev
Sep 5, 2022
Maintainer

If your are meaning the warning on the HyperHDR grabbers page, it's a static text only. No other rights are required as far I know, portal should handle all the necessary actions. But as I mentioned portal is a abstraction layer, each desktop must implement it by its own and some implementations are behind the official upstream.

0 replies

hkalle · 2022-09-05T16:49:14Z

hkalle
Sep 5, 2022
Author

I installed KDE Wayland support (sudo apt install plasma-workspace-wayland) and enabled it during log-in. Now a pop-up comes when activating the grabber and HyperHDR works as expected. But still too many downsides on Wayland. Need to re-think, what Linux distribution to use.
Again, thanks for your support.

1 reply

awawa-dev Sep 5, 2022
Maintainer

Trust me: from developer point of view Wayland is a nightmare, at least for me ;) But recently it had a success: after few...hmm, 14? years of unsuccessful approaches, various incompatible APIs and hacks Wayland at least gained a unified way to capture a screen :) Protocol version 4 was introduced just few months ago.

awawa-dev · 2022-09-05T17:13:05Z

awawa-dev
Sep 5, 2022
Maintainer

BTW If you want to use x11 grabber on x11 system with portal libraries installed, you can try to remove all libsmartPipewire.so.* files from /usr/share/hyperhdr/lib folder. This should force HyperHDR to give up trying to use the portal grabber, but I haven't tested it.

0 replies

hkalle · 2022-09-07T12:33:08Z

hkalle
Sep 7, 2022
Author

In parallel I installed Ubuntu 22.04 (Gnome) and the Wayland support is much more advanced. Actually, it is the default. Using HyperHDR with the Pipewire grabber a pop-up occurs, where you also could flag to remember the confirmation, which was not the case under KDE (Kubuntu). The Pipewire grabber in Ubuntu works under Wayland and X11, but.... not in fullscreen mode (VLC, Kodi). As soon as you have a frontend overlay on the video the grabber sends a screenshot.

Now to your dirty hack (remove all libsmartPipewire.so.* files from /usr/share/hyperhdr/lib). That works pretty well under Ubuntu x11. It is then using the x11 grabber. So, for me I am fine so far with the solution. For future releases it may be an option to let the user force x11 grabber or make Pipepwire work for fullscreen applications.

Thanks

0 replies

awawa-dev · 2022-09-07T16:15:56Z

awawa-dev
Sep 7, 2022
Maintainer

Pipewire grabber a pop-up occurs, where you also could flag to remember the confirmation, which was not the case under KDE

So KDE portal implementation "lies" about supporting Portal protocol version 4. It's version 3 at most, as I remember it was way behind the Gnome implementation which was used during developing. And if that library reports supported methods correctly, then HyperHDR would try to fallback to x11 grabber if it's possible because it checks protocol version ... but in this case adding a switch to force x11 grabber probably is necessary.

. The Pipewire grabber in Ubuntu works under Wayland and X11, but.... not in fullscreen mode (VLC, Kodi). As soon as you have a frontend overlay on the video the grabber sends a screenshot.

I think it's possible to extend pipewire grabber and capture a screen also in such scenarios. Work is in progress.

0 replies

awawa-dev · 2022-09-10T15:01:56Z

awawa-dev
Sep 10, 2022
Maintainer

The Pipewire grabber in Ubuntu works under Wayland and X11, but.... not in fullscreen mode (VLC, Kodi).

Can't reproduce on Ubuntu using VLC and VBox. Full screen works fine. Maybe it depends on the video graphic drivers/acceleration/DRM?

0 replies

hkalle · 2022-09-23T10:54:59Z

hkalle
Sep 23, 2022
Author

I tested it again with Pipewire grabber under X11 and grabbing of fullscreen applications does not work. It is also related to the Kodi interface itself, not only to videos planning. For videos I also deactivated the hardware accelaration with the same result.
Maybe it is hardware dependent. I am using an AMD® Ryzen 5 2400g with radeon vega graphics.

0 replies

awawa-dev · 2022-09-23T12:15:40Z

awawa-dev
Sep 23, 2022
Maintainer

OK, you tested X11 and I tested Wayland in fullscreen including VLC playing ;) I'm not saying that there is no problem but if the Pipewire breaks at some point and there is no warning from HyperHDR side in logs, it should be reported directly to the Pipewire project itself and ask for the explanation/investigation. X11 project was put in the maintenance state some time ago and it affects the situation more and more with time including applications development and video graphic drivers (now focusing on the Wayland, even NVidia gave up). Pipewire has some known minor bugs, for example screen saver (monitor power off) could pause the stream and it won't resume by itself again but it must be resolved by them.

0 replies

hkalle · 2022-09-23T13:06:39Z

hkalle
Sep 23, 2022
Author

I am happy so far with X11 and the workaround of deleting the pipewire libs from /usr/share/hyperhdr/lib. Once Wayland has overcome its child deseases (e.g. no auto-refresh rate in Kodi) I will change over.

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Software grabber on Kubuntu 22.04.1 LTS #333

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 14 comments 1 reply

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

Software grabber on Kubuntu 22.04.1 LTS #333

hkalle Sep 5, 2022

Replies: 14 comments · 1 reply

awawa-dev Sep 5, 2022 Maintainer

hkalle Sep 5, 2022 Author

awawa-dev Sep 5, 2022 Maintainer

awawa-dev Sep 5, 2022 Maintainer

hkalle Sep 5, 2022 Author

awawa-dev Sep 5, 2022 Maintainer

hkalle Sep 5, 2022 Author

awawa-dev Sep 5, 2022 Maintainer

awawa-dev Sep 5, 2022 Maintainer

hkalle Sep 7, 2022 Author

awawa-dev Sep 7, 2022 Maintainer

awawa-dev Sep 10, 2022 Maintainer

hkalle Sep 23, 2022 Author

awawa-dev Sep 23, 2022 Maintainer

hkalle Sep 23, 2022 Author

hkalle
Sep 5, 2022

Replies: 14 comments 1 reply

awawa-dev
Sep 5, 2022
Maintainer

hkalle
Sep 5, 2022
Author

awawa-dev
Sep 5, 2022
Maintainer

awawa-dev
Sep 5, 2022
Maintainer

hkalle
Sep 5, 2022
Author

awawa-dev
Sep 5, 2022
Maintainer

hkalle
Sep 5, 2022
Author

awawa-dev Sep 5, 2022
Maintainer

awawa-dev
Sep 5, 2022
Maintainer

hkalle
Sep 7, 2022
Author

awawa-dev
Sep 7, 2022
Maintainer

awawa-dev
Sep 10, 2022
Maintainer

hkalle
Sep 23, 2022
Author

awawa-dev
Sep 23, 2022
Maintainer

hkalle
Sep 23, 2022
Author