X7 Console Miyoo CFW Sound Only

[MCabal212]

Hi! I tested Miyoo CFW on X7 Console but it cames out the logo's sound only and no display. Could you make a support for this console please 🙏

[MCabal212]

I used my sd card from XYC Q8 and when I inserted/boot my sd card to my MP5 X7 it cames out with a sound's logo only.

[MCabal212]

VID_20230921_061254_384x216_364x206.mp4

Hi! I have an update my MP5 X7 has been booted up in TV mode and it works. What I do is make my sd card on my xyc q8 and turn on tv mode and make it's sd card used in my MP5 X7 and it worked on the tv but the controls are not configured yet so its not working.

[TriForceX]

Nice! thanks for the tests, looks very promising, i think after the 2.0 release we could do some tests on your unit.

We would appreciate if you can take photos of the internals (Main board, screen ribbon cable, cpu, etc...)

[MCabal212]

Okay, here it is and I think I cut the speaker 😅.

[MCabal212]

As I see there's a sd card inside the motherboard and I could remove and change it up to 32GB.

[MCabal212]

Will it be possible to support the X7 2nd sd card. Cause my X7 has 2 sd card slot one from the inside and one from the outside. It will be good to support it too to have more roms to store and play

[TriForceX]

Have you tried the latest 2.0.0 beta we have released recently? we would appreciate more tests using it.

[MCabal212]

Yeah actually the screen is blinking with a half white screen.

VID_20240102_161618_1280x720.mp4

[MCabal212]

I heard that there's other variants of X7 and its Menu has differences with each other. If you ever need this here is my X7 Console Menu UI. And mine has no PS1 yet so it must be different to other X7 running PS1.

[Josheyl]

Greetings and good morning I was wondering if you still have it? I have one but the SD card got corrupted.

[MCabal212]

I have the device, but unfortunately, the SD card slot located on the motherboard is broken because I accidentally damaged it. As a result, the device is unable to boot up properly. However, it is still operational in other ways. I am hopeful that if the custom firmware (CFW) is working properly with the X7 model, it may also function with the second SD card slot located externally on the device. This could potentially allow me to restore some of its functionality despite the issue with the internal slot.

[TriForceX]

Have you tried to use different screen drivers? in main partition open the file options.cfg and change MODULES_CUSTOM=0 to 1 then go to boot partition and edit the file modules.custom.sh and comment/uncomment the other existing lines with #

[MCabal212]

Doesn't work its still same.