Skip to content

Latest commit

 

History

History
207 lines (127 loc) · 8.81 KB

README.md

File metadata and controls

207 lines (127 loc) · 8.81 KB
Raw

HP 8x70W Hackintosh

OpenCore Version GitHub release GitHub issues

Before you give this EFI a try, make sure you read this!

This repo includes an OpenCore EFI for the 8x70W series with the 1080p TN display. DreamColor IPS displays are NOT supported!

Supported configurations:

NVIDIA: Quadro K1000M-K5000M / K1100M-K5100M

AMD: FirePro M4000

Tested on:

Specs 8770W (@HansHubertHass) (dead) 8570W (@HansHubertHass) 8570W (@Bautheile)
CPU Intel Core i5-3360M Intel Core i7-3740QM Intel Core i7-3840QM
GPU AMD FirePro M4000 Nvidia Quadro K1000M Nvidia Quadro K1000M
RAM 8 GB 1600 MHz DDR3 8 GB 1600 MHz DDR3 32 GB 1600 MHz DDR3
Screen 1080p TN-Panel
WiFi Intel Centrino Advanced-N 6200 Azureware AW-CE123H (BCM94352HMB) Dell DW1530 (BCM94352HMB)
Bluetooth HP BCM20702MD
macOS Monterey Sonoma Ventura

Working features

  • Audio
  • Battery readout
  • Boot
  • Bluetooth
  • Brightness Control
  • Broadcom WiFi (incl. Handoff + AirDrop)
  • Docking Station
  • Ethernet
  • ExpressCard
  • GPU acceleration (for Monterey+, check here)
  • Keyboard
  • SD-Card (if disabling IEEE 1394)
  • Firewire / IEEE 1394 (if disabling Flash media reader)
  • Sleep
  • Trackpad
  • TrackPoint
  • Power Management

Known Issues / not working

  • DRM (Apple TV+ + Netflix & Prime, when using Safari)
  • Fingerprint sensor

Download and Install

Go to the Releases page of this repo and download the latest release. Then, copy the EFI folder to your EFI partition... That's it.

How to Install macOS:

There are two ways for installation:

  1. If you have a working macOS install, download the Installer from the App Store and create a bootable Installer with createinstallmedia by using the following command in Terminal:

    • Catalina: sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

    • Big Sur: sudo /Applications/Install\ macOS\ Big\ Sur.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

    • Monterey: sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

    • Sonoma: sudo /Applications/Install\ macOS\ Sonoma.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

  2. If you are using Windows, use macrecovery.py from the offical OpenCore release package. Follow this guide to understand how it works.

After creating a bootable Installer, copy the EFI folder to the EFI partition and proceed with the installation. After completing the installation, mount the EFI partition of the installed OS and copy the EFI folder to its partition.

Generating your own serial and Editing ROM

Use GenSMBIOS (https://github.com/corpnewt/GenSMBIOS) to generate a serial for MacBookPro10,1.

Use PlistEdit Pro or any decent plist editor to manually enter the details in the following sections of the config (as shown in the video): (SystemSerialNumber, MLB, and UUID)

SMBIOS.mp4

Additionally, put your ethernet adapter's MAC address into the ROM section.

WiFi

Both the stock HP BCM943224HMS or a card based on the BCM94352HMB wifi chip, they will work out of the box, and there is no need to do anything here.

Note for Monterey and newer: The HP BCM943224HMS may cause issues preventing the system to boot but works just fine on Big Sur and older. Replace it with the BCM94352HMB in that case.

Intel users: Remove AirportBrcmFixup.kext, replace it with Airportitlwm and do an OC snapshot with ProperTree to get WiFi working. If you want the full macOS experience with AirDrop, Handoff and all of that, replace the Intel WiFi card with a supported Broadcom one.

Recommended WiFi cards: Azureware AW-CE123H, Dell DW1550

BIOS settings

System Configuration Menu

Boot Options

  • SecureBoot: Disabled

  • Boot Mode: UEFI

Device Configurations

  • SATA Device Mode: AHCI

  • Wake on USB: Disabled

  • Virtualization Technology: Enabled

  • Virtualization Technology for Directed I/O: Disabled

  • TXT Technology: Disabled

  • Intel HT Technology: Enabled

Built-in Device Options

  • LAN/WLAN Switching: Disabled

  • Fingerprint Device: Disabled

Port Options

  • Serial Port: Disabled

  • Parallel Port: Disabled

  • Flash media reader: Enabled

  • 1394 Port: Disabled

  • Smart Card: Disabled

Monterey and newer

For users who wish to run Monterey or a newer version:

  • NVIDIA

    After installation, it is necessary to apply the Post-Install Root Patch using OpenCore Legacy Patcher to patch the NVIDIA graphics kexts back to Monterey+. Keep in mind that you'll lose System Integrity Protection and the ability to apply Delta OTA updates for doing this.

    The patch needs to be reapplied after every macOS update.

  • AMD

    AMD users won't need to follow the earlier mentioned steps, as Monterey natively supports all GCN-based AMD GPUs. However, starting with Ventura, you will need to install the Post-Install Root Patch.

Faulty or degraded NVRAM

If you encounter installation issues, it is crucial to check if the NVRAM works. You can do this by entering the following command in Terminal:

sudo nvram myvar="$(date)"

After executing the command, reboot your system and verify if the value is stored in NVRAM by entering:

nvram myvar

If you get an error, it indicates that your 8x70W may have a faulty/degraded NVRAM. To finish the installation, you'll need to enable emulated NVRAM.

  1. Enable DisableVariableWrite in config.plist > Booter > Quirks
  2. Enable LegacyOverwrite in config.plist > NVRAM
  3. Add OpenVariableRuntimeDxe from OpenCorePkg
  4. Add OpenVariableRuntimeDxe before OpenRuntime in the config
  5. Enable LoadEarly on OpenVariableRuntimeDxe and OpenRuntime

Now, you can proceed with the installation.

Once the installation is complete, copy the LogoutHook folder, found in OpenCorePkg/Utilities, to a safe place and run the following command:

./Launchd.command install

Issues with Power Management

On my tester's Intel Core i7-3740QM 8570W, we got XCPM working fine. However, if you encounter any issues regarding Power Management, try following these steps:

  1. Disable SSDT-PLUG from the config
  2. Enable the two keys found in config.plist > Delete
  3. Disable AppleXcpmCfgLock in config.plist > Kernel > Quirks
  4. Enable AppleCpuPmLock in config.plist > Kernel > Quirks

For users on Sonoma, you need to enable the AppleCPUPowerManagement and AppleCPUPowerManagementClient kexts in the config.

Screenshot

About this Mac

Credits

Thanks to:

  • myself (for wasting my time writing this, providing fixes, and creating this EFI)
  • acidanthera (for developing an awesome bootloader)
  • Rehabman (for providing patches for 8x70)
  • TECHNIKVERBOT (for suggesting this idea due to lack of downloads outside of China :P)
  • HansHubertHass and Bautheile (for their valuable testing)
  • Krutav (for Dell vBIOS injection through OpenCore on the ROMless HP FirePro M4000)
  • onejay09 (for providing fixes for backlight control on NVIDIA cards)
  • ubihazard (for porting RehabMan's ProBook 4x30s EFI modules to OpenCore)
  • 5T33Z0 (for enabling XCPM on Catalina+)