Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

"ISM330DLC" Not able to get VDD and VDDOUT 1.8 voltage #149

Open
Omkardixi opened this issue May 18, 2022 · 1 comment
Open

"ISM330DLC" Not able to get VDD and VDDOUT 1.8 voltage #149

Omkardixi opened this issue May 18, 2022 · 1 comment
Labels
bug Something isn't working

Comments

@Omkardixi
Copy link

STEVAL-MKI109V3

STEVAL-MKI182V2

Type of bug

VDD is 0V while VDDOUT is 3.2V.

Describe the bug

I imported the _prj_MKI109V3.ioc file in the STM32 IDE after that I tried to integrate the example code "ism330dlc_read_data_polling.c" in the project and i just flashed the code using j-link Segger. After flashing the code I observed that the VDD was zero but VDDOUT was 3,2V. Instead of using 915 PWM value I tried some other values also but still voltage is not comming on the both the pins. On the other hand I tried to dump the .bin file from the unico-gui package then I observed the 1.8V on both the pins.

Additional context

Add any other context about the problem here. (ie: hardware description, compiler used, etc...)

@Omkardixi Omkardixi added the bug Something isn't working label May 18, 2022
@yoursanil
Copy link

YES!!!!!! facing the same issue... I am using STEVAL-MKI109V3 along with STEVAL-MKI182V2, whenever i am inserting sensor on to the 24 pin connector the Vdd is getting dropout.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
bug Something isn't working
Projects
None yet
Development

No branches or pull requests

2 participants