diff --git a/html/changelog.html b/html/changelog.html
index 66c7013aca0..dcc7821c818 100644
--- a/html/changelog.html
+++ b/html/changelog.html
@@ -47,6 +47,22 @@ <h3 class="author">DreamySkrell updated:</h3>
 				<li class="rscadd">Sectors blacklist mechanism.</li>
 				<li class="rscadd">Point Verdant: spaceport and waterdocks.</li>
 			</ul>
+			<h3 class="author">FluffyGhost updated:</h3>
+			<ul class="changes bgimages16">
+				<li class="backend">The CI now uses multiple pods to load-balance the tests in parallel.</li>
+				<li class="backend">Pods configuration is loaded from config/unit_test/ut_pods_configuration.json with a personalized ID (set by the CI) that instructs SSunit_test on what to do.</li>
+				<li class="backend">Labeler now downloads the PR, which I hope would help with the changelog required label.</li>
+				<li class="backend">Away sites now have a tag that indicates in what CI pod they should be tested, for load balancing. The tag is mandatory.</li>
+				<li class="backend">Unit tests now have tags, which are used to select which pods run which unit tests, using the &#x27;has any tag in&#x27; logic.</li>
+				<li class="backend">The CI now supports fail fast when running inside a merge queue.</li>
+				<li class="backend">The CI now supports retrying a pod run up to N times, when running inside a merge queue.</li>
+				<li class="backend">After the fixing of all the bad formatting of the code in a previous PR, megalinter is reintroduced, now it&#x27;s only your code that&#x27;s wrongly formatted.</li>
+				<li class="backend">The CI now only uploads artifacts with the logs on test failure, saving space.</li>
+				<li class="backend">The CI now sets the environment variables before any other step is done, so they are set correctly across the steps.</li>
+				<li class="backend">The linters now run in parallel.</li>
+				<li class="backend">Added the ability (off by default) to SSH into the unit test pods to diagnose issues.</li>
+				<li class="backend">Introduced SSunit_tests_config, to store and manage the unit tests config.</li>
+			</ul>
 			<h3 class="author">Sniblet updated:</h3>
 			<ul class="changes bgimages16">
 				<li class="bugfix">Using psi-mend now gives intended feedback.</li>
diff --git a/html/changelogs/.all_changelog.yml b/html/changelogs/.all_changelog.yml
index 9488b01d03a..c1949f1af6b 100644
--- a/html/changelogs/.all_changelog.yml
+++ b/html/changelogs/.all_changelog.yml
@@ -32126,6 +32126,31 @@ DO NOT EDIT THIS FILE BY HAND!  AUTOMATICALLY GENERATED BY ss13_genchangelog.py.
   - rscadd: Guaranteed spawn flag added to Point Verdant.
   - rscadd: Sectors blacklist mechanism.
   - rscadd: 'Point Verdant: spaceport and waterdocks.'
+  FluffyGhost:
+  - backend: The CI now uses multiple pods to load-balance the tests in parallel.
+  - backend: Pods configuration is loaded from config/unit_test/ut_pods_configuration.json
+      with a personalized ID (set by the CI) that instructs SSunit_test on what to
+      do.
+  - backend: Labeler now downloads the PR, which I hope would help with the changelog
+      required label.
+  - backend: Away sites now have a tag that indicates in what CI pod they should be
+      tested, for load balancing. The tag is mandatory.
+  - backend: Unit tests now have tags, which are used to select which pods run which
+      unit tests, using the &#x27;has any tag in&#x27; logic.
+  - backend: The CI now supports fail fast when running inside a merge queue.
+  - backend: The CI now supports retrying a pod run up to N times, when running inside
+      a merge queue.
+  - backend: After the fixing of all the bad formatting of the code in a previous
+      PR, megalinter is reintroduced, now it&#x27;s only your code that&#x27;s wrongly
+      formatted.
+  - backend: The CI now only uploads artifacts with the logs on test failure, saving
+      space.
+  - backend: The CI now sets the environment variables before any other step is done,
+      so they are set correctly across the steps.
+  - backend: The linters now run in parallel.
+  - backend: Added the ability (off by default) to SSH into the unit test pods to
+      diagnose issues.
+  - backend: Introduced SSunit_tests_config, to store and manage the unit tests config.
   Sniblet:
   - bugfix: Using psi-mend now gives intended feedback.
   - spellcheck: Attacks with psi-rend now make grammatical sense.
diff --git a/html/changelogs/fluffyghost-cibetter.yml b/html/changelogs/fluffyghost-cibetter.yml
deleted file mode 100644
index 096251f561f..00000000000
--- a/html/changelogs/fluffyghost-cibetter.yml
+++ /dev/null
@@ -1,53 +0,0 @@
-################################
-# Example Changelog File
-#
-# Note: This file, and files beginning with ".", and files that don't end in ".yml" will not be read. If you change this file, you will look really dumb.
-#
-# Your changelog will be merged with a master changelog. (New stuff added only, and only on the date entry for the day it was merged.)
-# When it is, any changes listed below will disappear.
-#
-# Valid Prefixes:
-#   bugfix
-#   wip (For works in progress)
-#   tweak
-#   soundadd
-#   sounddel
-#   rscadd (general adding of nice things)
-#   rscdel (general deleting of nice things)
-#   imageadd
-#   imagedel
-#   maptweak
-#   spellcheck (typo fixes)
-#   experiment
-#   balance
-#   admin
-#   backend
-#   security
-#   refactor
-#################################
-
-# Your name.
-author: FluffyGhost
-
-# Optional: Remove this file after generating master changelog.  Useful for PR changelogs that won't get used again.
-delete-after: True
-
-# Any changes you've made.  See valid prefix list above.
-# INDENT WITH TWO SPACES.  NOT TABS.  SPACES.
-# SCREW THIS UP AND IT WON'T WORK.
-# Also, all entries are changed into a single [] after a master changelog generation. Just remove the brackets when you add new entries.
-# Please surround your changes in  double quotes ("), as certain characters otherwise screws up compiling. The quotes will not show up in the changelog.
-changes:
-  - backend: "The CI now uses multiple pods to load-balance the tests in parallel."
-  - backend: "Pods configuration is loaded from config/unit_test/ut_pods_configuration.json with a personalized ID (set by the CI) that instructs SSunit_test on what to do."
-  - backend: "Labeler now downloads the PR, which I hope would help with the changelog required label."
-  - backend: "Away sites now have a tag that indicates in what CI pod they should be tested, for load balancing. The tag is mandatory."
-  - backend: "Unit tests now have tags, which are used to select which pods run which unit tests, using the 'has any tag in' logic."
-  - backend: "The CI now supports fail fast when running inside a merge queue."
-  - backend: "The CI now supports retrying a pod run up to N times, when running inside a merge queue."
-  - backend: "After the fixing of all the bad formatting of the code in a previous PR, megalinter is reintroduced, now it's only your code that's wrongly formatted."
-  - backend: "The CI now only uploads artifacts with the logs on test failure, saving space."
-  - backend: "The CI now sets the environment variables before any other step is done, so they are set correctly across the steps."
-  - backend: "The linters now run in parallel."
-  - backend: "Added the ability (off by default) to SSH into the unit test pods to diagnose issues."
-  - backend: "Introduced SSunit_tests_config, to store and manage the unit tests config."