You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am a new user of Zigbee2MQTT 1.37.1 with Jeedom and I have successfuly paired about 10 plugs BLITZWOLF BSHP13 (_TZ3000_g5xawfcq) with my Sonoff ZDongle-E (firmware 7.4.3).
All my plugs are working fine and all values are read (power, current, energy and voltage)
But my logs are full of error messages :
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
It is always the same sequence repeating.
With 10 plugs and a refresh every 1mn, my log is filling quickly.
I can understand that the trouble is concerning a missing converter, but what can I do to solve it ?
My experience and my english are not good enough to know what and where to search for an issue.
If anyone can help me, it will be appreciated
Best regards
The text was updated successfully, but these errors were encountered:
Good morning
Since I have posted this issue, I have not received any answer.
As I am a new french user, have I missed something when I write my issue ?
Or is it just because nobody can answer me ?
If ever I have made some faults when I write it, I appologize.
Thanks
Good morning
I am a new user of Zigbee2MQTT 1.37.1 with Jeedom and I have successfuly paired about 10 plugs BLITZWOLF BSHP13 (_TZ3000_g5xawfcq) with my Sonoff ZDongle-E (firmware 7.4.3).
All my plugs are working fine and all values are read (power, current, energy and voltage)
But my logs are full of error messages :
It is always the same sequence repeating.
With 10 plugs and a refresh every 1mn, my log is filling quickly.
I can understand that the trouble is concerning a missing converter, but what can I do to solve it ?
My experience and my english are not good enough to know what and where to search for an issue.
If anyone can help me, it will be appreciated
Best regards
The text was updated successfully, but these errors were encountered: