Version 1.22.4

Added compatibility mode for RRF 2.01
Changed "Print" to "Job" and "Printing" to "Processing" basically everywhere in DWC
Added support for Duet 3 firmware files
Added new drop-down item to allow users to specify the mesh size for grid probing
Updated German translations
Bug fix: When running M997 directly from DWC, multiple modal windows would show up
Bug fix: After a file had been edited, sometimes a JavaScript error could show up
Bug fix: After a /sys file had been uploaded, DWC did not refresh the sys files automatically
Bug fix: Upload buttons were not visible on SM screen sizes (tablets)
Bug fix: After creating display files the file list was not updated automatically

Version 1.22.2

• List of saved G-Codes on the Settings page is now scrollable
• When a response cannot be parsed, the connection is terminated until the web interface is reloaded
• Brought German translations up-to-date and merged in more improvements for Spanish and - Portugesian translations (thanks ajtudela and phcella)
• Changed which movement buttons are visible on different resolutions
• When filaments are loaded, M703 is sent along with M701
• Added new option to edit config macros for filament entries
• Mobile keyboards are automatically closed after temperature inputs (xs+sm layouts)
• Bug fix: If variables in localStorage were badly initialised their default value was not restored
• Bug fix: Multiple HTTP requests can be sent to display all the files on the SD card
• Bug fix: Webcam rotation+flip options didn't work
• Bug fix: When existing files were edited, the whole list was reloaded
• Bug fix: When small uploads were manually cancelled, DWC tried to restart them
• Bug fix: Setting all the tool temperatures tried to set temperatures for tools without heaters
• Bug fix: When trying to a password-connected machine, a notification saying "Invalid password" would pop up

Version 1.22

• Active tool is better highlighted
• Time on G-Code Console is no longer wrapped
• Implemented auto-completion feature on G-Code inputs
• G-code inputs provide a new link item to the G-code wiki page
• When G29 is invoked with the P-parameter, the corresponding heightmap file is displayed
• Move steps for each axis and extruder amounts+feedrates can be changed via right-click
• When moving around on the Control page, S2 is added to the G1 code automatically. Can be turned off on the Settings page too
• Custom themes can be used by uploading own .theme.css files
• Compensation type is shown in the Auto Calibration dropdown menu
• Fan and heater names can be assigned (see M305 S and M106 C parameters)
• Use "axes" value instead of "xyz" length to get number of configured axes
• DWC reloads itself/its settings when it/its settings are updated
• Implemented possibility to download the G-code log as a CSV or TXT file
• Webcam image can be flipped and rotated on demand
• Improved settings behavior when running on localhost
• Removed fotomas's Dark theme in favour of standard Slate theme
• Improved theme support for standard Boostrap 3 themes
• Added a few new Bootstrap 3 themes from bootswatch.com
• Added MCU temperature to Sensors panel
• Added machine mode string to the Machine Status panel (requires latest RRF version)
• Made usage of localStorage optional
• Greatly improved automatic reconnect behaviour
• Added more movement buttons for XL displays (>= 1500px)
• Clicking on the axis coordinates allows setting them directly via G92
• Factory defaults of DWC can be stored as dwc_factory.json on the SD card in /www
• Fixed wordwrap of the babstepping buttons
• Show min+max values of the MCU temperatures on hover
• Uploads smaller than 1MiB are automatically retried if they fail
• Increased default number of AJAX retries from 1 to 2
• Bug fix: Upload speeds for low transmission rates were not rounded properly
• Bug fix: Some elements were not named correctly causing the W3C validation to fail
• Bug fix: Units of min+max voltages were wrong
• Bug fix: When the DWC settings could not be loaded from the Duet, defaults are only uploaded if the file could not be found
• Bug fix: Sometimes failed AJAX requests could make DWC stop updating
• Bug fix: Fixed a problem where the A axis could cause a JS error
• Bug fix: Tool Fan was always updated even if the user tried to change its value

Version 1.21.1

• Increased precision of the coordinates for the X+Y axes
• Added new 'O' status character to indicate that the machine has been turned off
• Added support for 9 total fans
• Implemented more granular control of pop-up notifications and made them wider on small devices
• Spindle RPM of multiple tools can be set (requires RRF 1.21.1 or later)
• JSON files are automatically opened via the text editor when double-clicked
• Clicking on heater links activates them, then puts them into standby mode and eventually turns them off
• DWC settings are uploaded to and downloaded from the Duet board by default
• AJAX retries are automatically delayed if the time since it was sent is low
• Added option to automatically close error messages. If not set, error messages are displayed persistently
• Added maximum value for AJAX retries
• Added Display editor for the Duet Maestro
• DWC reloads file info automatically when a file simulation ends
• DWC closes all notifications when Connect is pressed
• When the session times out and a password is set, DWC attempts to reconnect automatically
• Upload buttons remain enabled when a print is started
• Visibility of fan sliders is stored in localStorage
• Bug fix: When using the app, AJAX retries were not performed
• Bug fix: Messages were not logged when no G-code was sent before
• Bug fix: Prompt for firmware updates were not displayed when the machine was off
• Bug fix: When using all 3 fans, the controls were not displayed on a Duet 2 after reloading the interface
• Bug fix: When a 3D scanner was detached a JS error could be thrown
• Bug fix: Tools calld "Spindle" are no longer displayed as such; use CNC mode instead
• Bug fix: Occasionally a JS error was reported after a G-code file had been uploaded

Version 1.19

• Enhanced 3D mesh view for different X+Y spacings
• Increased number of configurable temp sensors from 6 to 10
• Added message box controls for XY axes
• Implemented new "Mix" option on the extrude/retract panel
• Added Dutch translations (thanks whosrdaddy)
• Bug fix: DWC disconnected when new temp sensors were configured
• Bug fix: After reconnecting the active message box was not displayed
• Bug fix: Sometimes the current tool was not underlined
• Bug fix: ABC axes weren't displayed properly

Version 1.17+1

• Added new Tools panel which will supersede the old Heaters panel in the next version
• Refactored major parts of the Heaters panel
• Added new Filaments page
  • Filaments can be created on the new page
  • Right-clicking entries allows load+unload macros to be modified
  • When clicking on tools that have only one extruder assigned, a popup is shown that lets users load, unload and exchange the current filament (requires RRF 1.19 or later)
• Implemented support for custom extra temperature sensors:
  Added new Extra panel to provide a list of the extra sensors
  Extra temperatures can be optionally monitored on the chart
  These temperatures on the chart are displayed as dashes
• Greatly improved file tables:
  • Allow items to be sorted by clicking on the headers
  • Multiple items can be selected, moved via drag&drop and deleted or downloaded as ZIP
  • Added support for double-clicks
  • Implemented new logic for context menus (open via right-click)
• Allow bed heater to be remapped to any other heater
• Added support for M291+M292 (show+confirm/close message box, only RRF 1.19 or later)
• Removed dependencies on the "axes" and "heads" fields of the HTTP status response
• Added support for 3 more axes (ABC)
• Grouped "Make new" buttons on the Macros page
• When "config.g" is uploaded via the edit function, "config.g" is moved to "config.g.bak" first
• Enhanced Tools tab on the Settings page and allow tools to be named
• Improved status loop and chart performance
• Updated JSZip library to the latest version
• Added all missing German translations
• Added support for HTML5 notifications
• Bug fix: Sometimes XY points in the 3D view weren't mapped correctly
• Bug fix: G-Codes Files didn't display contents of second SD card after mounting
• Bug fix: Main content was scrollable even though not enough space was available
• Bug fix: Occasionally after reconnecting the macros weren't properly loaded
• Bug fix: When a filament directory had no valid "date created" timestamp, the web interface disconnected with an AJAX error
• Bug fix: Deleting filaments didn't work
• Bug fix: Heater temperature inputs were not updated if the new "tools" and "states" fields were present