Wifi Password visible to anyone on settings Screen

[KevanBuilds]

Unfortunately the wifi password of the network the device is connected to is visible on the settings screen. For me this is undesirable since it means I can't hand a guest the remote without the possibility of my password being leaked. Is it posible to make the password invisible or marked with ****** like you see online?

It should also not show the previously input password when you go to edit it.

[alex-code]

I included the WiFi password to help try and fix any connection issues.
Just made it quicker to be able to check if the password you used is correct.

Same with the keyboard, this was just for convenience if you mistyped you wouldn't need to type it all out again.

Couple things I could do;

1. Add a define in platformio.ini that can be toggled to show/hide the password on the settings.
2. See if there's a way to detect if the WiFi SSID/password is wrong and have different WiFi status icons that give more feedback to help diagnose connection issues.

[alex-code]

Similar to adding a 30x30 pixel icon I would love to add an icon to the trains roster. You could for example use this for operator loco's like DB or NS, or for small side profile icons of the trains.

I'll add it to the list of future features/ideas. The current display is sized and positioned specifically.

I've defined all of my trains in the throttle and unfortunately have run into another small issue.
There is no paging in the loco by name and group lists. unfortunately I can't therefore select all of my locos using the pre-defined roster.

How many locos have you created configs for?
Are any showing?

[KevanBuilds]

I've added 8 locos, only 7 are showing.
as a test I've also added 8 groups, only 7 are showing.

in both lists there is no way to go to a second page, although you would expect one.

[alex-code]

I've added 8 locos, only 7 are showing. as a test I've also added 8 groups, only 7 are showing.

in both lists there is no way to go to a second page, although you would expect one.

Fixed the paging.

[KevanBuilds]

Thanks for all the quick updates so far.

Unfortunately during uploading of the new code, it seems to loose al settings and configured trains.
My next suggestion is to have a backup feature or download/upload roster feature in the throttle configuration website.
This will also help configure more than one throttle with the same settings or at least the same roster.

Edit: It seems to have fixed itself after turning it off and on again. luckily all my trains aren't gone!
Paging seems to work just fine, thanks again.

[alex-code]

Thanks for all the quick updates so far.

Unfortunately during uploading of the new code, it seems to loose al settings and configured trains. My next suggestion is to have a backup feature or download/upload roster feature in the throttle configuration website. This will also help configure more than one throttle with the same settings or at least the same roster.

Edit: It seems to have fixed itself after turning it off and on again. luckily all my trains aren't gone! Paging seems to work just fine, thanks again.

The MicroSD card isn't touched with uploading code.
Sometimes the card can fail to initialise so an off and on will normally bring it back.

I have got some ideas about backup/restore, need to see about creating/reading zip files.