Replies: 7 comments 32 replies
-
|
Sounds like it's crashing and restarting. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the delay, I had to go out. Here is the Monitor Output for "Upload Filesystem Image":
Processing firebeetle2 (platform: espressif32@^5.3.0; board: firebeetle2; framework: arduino)
Leaving... Next, I tried the "Upload and Monitor" option which showed an error in YELLOW. Unfortunately it immediately wipes the monitor window and displays the following: Rebooting... rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Core 1 register dump: Backtrace: 0x400e9ed0:0x3ffb27d0 0x401051fe:0x3ffb2820 #0 0x400e9ed0:0x3ffb27d0 in setup() at src/main.cpp:313 ELF file SHA256: 80edf4ba47f3ce3e Rebooting... rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Core 1 register dump: Backtrace: 0x400e9ed0:0x3ffb27d0 0x401051fe:0x3ffb2820 #0 0x400e9ed0:0x3ffb27d0 in setup() at src/main.cpp:313 ELF file SHA256: 80edf4ba47f3ce3e This just repeats over and over. I did not catch the error message but I will try again. |
Beta Was this translation helpful? Give feedback.
-
|
I was able to capture a snippet of the output. Here it is:
Processing firebeetle2 (platform: espressif32@^5.3.0; board: firebeetle2; framework: arduino)
In file included from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/WString.h:29, Archiving .pio\build\firebeetle2\lib38d\libQRcodeDisplay.a In file included from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/WString.h:29, Compiling .pio\build\firebeetle2\libcc9\SD\sd_diskio.cpp.o I couldn't capture more as the window wiped the output too quickly. |
Beta Was this translation helpful? Give feedback.
-
|
There can be some warnings but this shouldn't affect anything. This looks like the same issue you had here #119 |
Beta Was this translation helpful? Give feedback.
-
|
Phew! I was running out of ideas 😂 I wonder if that's had a revision. |
Beta Was this translation helpful? Give feedback.
-
|
I bought the first and latest(Oct/24) display from DigiKey Canada just like the Firebeetle. Here is the link: https://www.digikey.ca/en/products/detail/dfrobot/DFR0669/13280137?so=88823445&content=productdetail_CA&mkt_tok=MDI4LVNYSy01MDcAAAGVsIqCnG5B8YlpV4__y9tV8xmqcr-_vn2wsnIuleZXdTfjoeKg9atJEhVPg-HgZob08TQn3FEpyTASJifUMFxtgiR6JpEdKRuxGp5yGtuh I had also bought one (Second) from RobotShop back in August 2024, The web site had this one mislabeled DFR0920 but with the correct manufacturer's code of DFR0669. Both behaved the same. Here's the link: https://ca.robotshop.com/products/dfrobot-35-in-480x320-tft-lcd-capacitive-touchscreen |
Beta Was this translation helpful? Give feedback.
-
|
Will see if I can find docs on the touch chip but it's tricky to test without hardware that has the issue. But after commenting out those lines it's all working as expected? |
Beta Was this translation helpful? Give feedback.
-
|
Working as expected. Will fully test it out later. I'll remove the debug flag. Thanks for sticking to this problem. I do appreciate all of your work. Have recommended the T3 to others and have a couple of guys who want me to build one for them. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for working with me too, hopefully I'll figure out what's causing the issue and get it sorted. |
Beta Was this translation helpful? Give feedback.
-
|
I'm very new to this stuff so I may be asking a dumb question. I'm having a similar issue with mine. When I upload and monitor it appears my firebeetle is continuously rebooting and I don't even know where to start. This is what comes up. Any Ideas what I'm doing wrong?
Processing dfrobot_firebeetle2_esp32e (platform: espressif32@^6.9.0; board: dfrobot_firebeetle2_esp32e; framework: arduino)
Leaving... Please build project in debug configuration to get more details about an exception. --- Terminal on COM9 | 115200 8-N-1 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Core 1 register dump: Backtrace: 0x400eb558:0x3ffb2240 0x40107506:0x3ffb2290 ELF file SHA256: c5dd18c5a39538b2 Rebooting... rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Core 1 register dump: Backtrace: 0x400eb558:0x3ffb2240 0x40107506:0x3ffb2290 ELF file SHA256: c5dd18c5a39538b2 Rebooting... rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Core 1 register dump: Backtrace: 0x400eb558:0x3ffb2240 0x40107506:0x3ffb2290 |
Beta Was this translation helpful? Give feedback.
-
|
There is an issue I'm trying to reproduce so I can fix but commenting out some lines of code seems to sort it. Can you try commenting out lines 334-337 in main.cpp then upload and monitor. |
Beta Was this translation helpful? Give feedback.
-
|
That did it!
Thank you so much !
Roger
…________________________________
From: Alex ***@***.***>
Sent: Friday, December 6, 2024 11:03 AM
To: DCC-EX/EX-T3-WiFi ***@***.***>
Cc: slotequalizer ***@***.***>; Comment ***@***.***>
Subject: Re: [DCC-EX/EX-T3-WiFi] Need help getting T3 to work. (Discussion #120)
There is an issue I'm trying to reproduce so I can fix but commenting out some lines of code seems to sort it.
Can you try commenting out lines 334-337 in main.cpp then upload and monitor.
Just add // before each line.
—
Reply to this email directly, view it on GitHub<#120 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AIZS5W7S3TW6VOOSBDLRP7D2EHYJ7AVCNFSM6AAAAABR46PAZCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNBYHAZDINA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Great, I'm working on a fix. Would you be able to check the box the display came in for a date by the barcode? |
Beta Was this translation helpful? Give feedback.
-
|
I'm sorry, I've had it for some time and got rid of the packaging. |
Beta Was this translation helpful? Give feedback.
-
|
New problem. My DCCEx CS is not detected |
Beta Was this translation helpful? Give feedback.
-
|
Could you start a new discussion, will be easier as this one is quite long but are the CS and throttle on the same network? |
Beta Was this translation helpful? Give feedback.
-
|
I have no idea why commenting out those lines works but I’m more than satisfied with the outcome.
Rob Leathley
Hampton, New Brunswick
…________________________________
From: slotequalizer ***@***.***>
Sent: Friday, December 6, 2024 8:46:43 PM
To: DCC-EX/EX-T3-WiFi ***@***.***>
Cc: FECRwy ***@***.***>; Author ***@***.***>
Subject: Re: [DCC-EX/EX-T3-WiFi] Need help getting T3 to work. (Discussion #120)
That did it!
Thank you so much !
Roger
________________________________
From: Alex ***@***.***>
Sent: Friday, December 6, 2024 11:03 AM
To: DCC-EX/EX-T3-WiFi ***@***.***>
Cc: slotequalizer ***@***.***>; Comment ***@***.***>
Subject: Re: [DCC-EX/EX-T3-WiFi] Need help getting T3 to work. (Discussion #120)
There is an issue I'm trying to reproduce so I can fix but commenting out some lines of code seems to sort it.
Can you try commenting out lines 334-337 in main.cpp then upload and monitor.
Just add // before each line.
—
Reply to this email directly, view it on GitHub<#120 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AIZS5W7S3TW6VOOSBDLRP7D2EHYJ7AVCNFSM6AAAAABR46PAZCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNBYHAZDINA>.
You are receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub<#120 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BHDX5TTX63K4XFD4HBEELGD2EJAPHAVCNFSM6AAAAABR46PAZCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNBZGE2TCMY>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Would you be able to check the box the display came in for a date by the barcode? |
Beta Was this translation helpful? Give feedback.
-
|
Sorry Alex, I just took all the packaging to the recycling depot yesterday. Figured it was time to clean up. |
Beta Was this translation helpful? Give feedback.
-
Hi,
A while back I ran into some issues getting my T3 to work. That eventually got fixed. I'm now trying to build a second T3. I have downloaded the current version from GitHub and tried programming my Firebeetle both via the Arduino and Platformio IDEs. All I got, even with what appeared to be successful programming, was a screen that simply flashed on a regular basis. I then tried the online programmer and got the same results. I even tried erasing the flash before programming online and same result.
Here is the initial debug info from the online programmer:
esptool.js
Serial port WebSerial VendorID 0x1a86 ProductID 0x7522
Connecting...Debug: _connect_attempt default_reset false
Debug: Timeout
Debug: Sync
Debug: Sync err Error: Timeout
.Debug: Sync
Debug: Sync err Error: Timeout
.Debug: Sync
Debug: 1431642130
Debug: Chip Magic f01d83
Detecting chip type... ESP32
Debug: Read efuse 1073061900
Debug: Read efuse 1073061900
Debug: Read efuse 1073061908
Debug: Read efuse 1073061900
Chip is ESP32-D0WD-V3 (revision 3)
Debug: Read efuse 1073061900
Debug: Read efuse 1073061900
Debug: Read efuse 1073061904
Debug: Read efuse 1073061912
Features: Wi-Fi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
Debug: Read efuse 1073061892
Debug: Read efuse 1073061896
MAC: cc:7b:5c:bb:cf:18
Debug: Read efuse 1073061892
Debug: Read efuse 1073061896
Uploading stub...
Debug: mem_begin 3416 1 6144 400be000
Debug: check_command enter RAM download mode
Debug: check_command write to target RAM
Debug: mem_begin 156 1 6144 3ffdeba8
Debug: check_command enter RAM download mode
Debug: check_command write to target RAM
Running stub...
Debug: check_command leave RAM download mode
Stub running...
Changing baudrate to 921600
Debug: 0
Changed
Debug: Sync
And here is the debug info from programming:
Debug: EspLoader program
Debug: Data Length 4128768
Debug: Image Length 4128768
Debug: _update_image_flash_params keep undefined undefined
Debug: Image MD5 200d7756a68271065f223c0cf44a0aa9
Compressed 4128768 bytes to 1103224...
Debug: check_command enter compressed flash mode
Debug: Write loop 0 0 68
Writing at 0x0... (1%)
Debug: flash_defl_block 78 da
Debug: check_command write compressed data to flash after seq 0
Debug: Write loop 0 1 68
Writing at 0x12181... (2%)
Debug: flash_defl_block 44 8
Debug: check_command write compressed data to flash after seq 1
Debug: Write loop 0 2 68
Writing at 0x1d071... (4%)
Debug: flash_defl_block 7a 2b
Debug: check_command write compressed data to flash after seq 2
Debug: Write loop 0 3 68
Writing at 0x2789a... (5%)
Debug: flash_defl_block 1a f2
Debug: check_command write compressed data to flash after seq 3
Debug: Write loop 0 4 68
Writing at 0x2fc45... (7%)
Debug: flash_defl_block 25 29
Debug: check_command write compressed data to flash after seq 4
Debug: Write loop 0 5 68
Writing at 0x3d8b4... (8%)
Debug: flash_defl_block 36 1e
Debug: check_command write compressed data to flash after seq 5
Debug: Write loop 0 6 68
Writing at 0x51335... (10%)
Debug: flash_defl_block db 39
Debug: check_command write compressed data to flash after seq 6
Debug: Write loop 0 7 68
Writing at 0x57194... (11%)
Debug: flash_defl_block 4a 7c
Debug: check_command write compressed data to flash after seq 7
Debug: Write loop 0 8 68
Writing at 0x5d627... (13%)
Debug: flash_defl_block 73 ce
Debug: check_command write compressed data to flash after seq 8
Debug: Write loop 0 9 68
Writing at 0x63ba7... (14%)
Debug: flash_defl_block a3 d8
Debug: check_command write compressed data to flash after seq 9
Debug: Write loop 0 10 68
Writing at 0x6a612... (16%)
Debug: flash_defl_block 70 ae
Debug: check_command write compressed data to flash after seq 10
Debug: Write loop 0 11 68
Writing at 0x6fc36... (17%)
Debug: flash_defl_block 92 a
Debug: check_command write compressed data to flash after seq 11
Debug: Write loop 0 12 68
Writing at 0x7555d... (19%)
Debug: flash_defl_block 54 ee
Debug: check_command write compressed data to flash after seq 12
Debug: Write loop 0 13 68
Writing at 0x7b728... (20%)
Debug: flash_defl_block ab bb
Debug: check_command write compressed data to flash after seq 13
Debug: Write loop 0 14 68
Writing at 0x815b9... (22%)
Debug: flash_defl_block 79 a5
Debug: check_command write compressed data to flash after seq 14
Debug: Write loop 0 15 68
Writing at 0x8732c... (23%)
Debug: flash_defl_block 44 fa
Debug: check_command write compressed data to flash after seq 15
Debug: Write loop 0 16 68
Writing at 0x8d1d2... (25%)
Debug: flash_defl_block 89 f0
Debug: check_command write compressed data to flash after seq 16
Debug: Write loop 0 17 68
Writing at 0x92e05... (26%)
Debug: flash_defl_block 35 97
Debug: check_command write compressed data to flash after seq 17
Debug: Write loop 0 18 68
Writing at 0x9891b... (27%)
Debug: flash_defl_block 35 5a
Debug: check_command write compressed data to flash after seq 18
Debug: Write loop 0 19 68
Writing at 0x9dd1e... (29%)
Debug: flash_defl_block 25 77
Debug: check_command write compressed data to flash after seq 19
Debug: Write loop 0 20 68
Writing at 0xa310d... (30%)
Debug: flash_defl_block 54 3c
Debug: check_command write compressed data to flash after seq 20
Debug: Write loop 0 21 68
Writing at 0xa838a... (32%)
Debug: flash_defl_block 1f 24
Debug: check_command write compressed data to flash after seq 21
Debug: Write loop 0 22 68
Writing at 0xad7c4... (33%)
Debug: flash_defl_block 4b 95
Debug: check_command write compressed data to flash after seq 22
Debug: Write loop 0 23 68
Writing at 0xb2a71... (35%)
Debug: flash_defl_block b7 c1
Debug: check_command write compressed data to flash after seq 23
Debug: Write loop 0 24 68
Writing at 0xb7a96... (36%)
Debug: flash_defl_block e6 c9
Debug: check_command write compressed data to flash after seq 24
Debug: Write loop 0 25 68
Writing at 0xbcf87... (38%)
Debug: flash_defl_block 6b 54
Debug: check_command write compressed data to flash after seq 25
Debug: Write loop 0 26 68
Writing at 0xc21c3... (39%)
Debug: flash_defl_block 18 28
Debug: check_command write compressed data to flash after seq 26
Debug: Write loop 0 27 68
Writing at 0xc7540... (41%)
Debug: flash_defl_block ec 1d
Debug: check_command write compressed data to flash after seq 27
Debug: Write loop 0 28 68
Writing at 0xcd0b8... (42%)
Debug: flash_defl_block 6e 6a
Debug: check_command write compressed data to flash after seq 28
Debug: Write loop 0 29 68
Writing at 0xd28d1... (44%)
Debug: flash_defl_block 94 f4
Debug: check_command write compressed data to flash after seq 29
Debug: Write loop 0 30 68
Writing at 0xd7c60... (45%)
Debug: flash_defl_block 6e 42
Debug: check_command write compressed data to flash after seq 30
Debug: Write loop 0 31 68
Writing at 0xdcee5... (47%)
Debug: flash_defl_block fc 48
Debug: check_command write compressed data to flash after seq 31
Debug: Write loop 0 32 68
Writing at 0xe22ff... (48%)
Debug: flash_defl_block 73 28
Debug: check_command write compressed data to flash after seq 32
Debug: Write loop 0 33 68
Writing at 0xe7936... (50%)
Debug: flash_defl_block c6 43
Debug: check_command write compressed data to flash after seq 33
Debug: Write loop 0 34 68
Writing at 0xecfe1... (51%)
Debug: flash_defl_block ce 45
Debug: check_command write compressed data to flash after seq 34
Debug: Write loop 0 35 68
Writing at 0xf2767... (52%)
Debug: flash_defl_block 1d 26
Debug: check_command write compressed data to flash after seq 35
Debug: Write loop 0 36 68
Writing at 0xf870c... (54%)
Debug: flash_defl_block ed 47
Debug: check_command write compressed data to flash after seq 36
Debug: Write loop 0 37 68
Writing at 0xfe138... (55%)
Debug: flash_defl_block c2 c2
Debug: check_command write compressed data to flash after seq 37
Debug: Write loop 0 38 68
Writing at 0x104f37... (57%)
Debug: flash_defl_block 68 44
Debug: check_command write compressed data to flash after seq 38
Debug: Write loop 0 39 68
Writing at 0x10df44... (58%)
Debug: flash_defl_block d 3
Debug: check_command write compressed data to flash after seq 39
Debug: Write loop 0 40 68
Writing at 0x116ce2... (60%)
Debug: flash_defl_block f5 b0
Debug: check_command write compressed data to flash after seq 40
Debug: Write loop 0 41 68
Writing at 0x11c5fc... (61%)
Debug: flash_defl_block 40 38
Debug: check_command write compressed data to flash after seq 41
Debug: Write loop 0 42 68
Writing at 0x124039... (63%)
Debug: flash_defl_block 4a e2
Debug: check_command write compressed data to flash after seq 42
Debug: Write loop 0 43 68
Writing at 0x12b76f... (64%)
Debug: flash_defl_block 4c 4f
Debug: check_command write compressed data to flash after seq 43
Debug: Write loop 0 44 68
Writing at 0x13430c... (66%)
Debug: flash_defl_block 44 95
Debug: check_command write compressed data to flash after seq 44
Debug: Write loop 0 45 68
Writing at 0x13c238... (67%)
Debug: flash_defl_block e4 43
Debug: check_command write compressed data to flash after seq 45
Debug: Write loop 0 46 68
Writing at 0x1414a4... (69%)
Debug: flash_defl_block 3d a1
Debug: check_command write compressed data to flash after seq 46
Debug: Write loop 0 47 68
Writing at 0x149617... (70%)
Debug: flash_defl_block 42 e4
Debug: check_command write compressed data to flash after seq 47
Debug: Write loop 0 48 68
Writing at 0x14ee46... (72%)
Debug: flash_defl_block 92 b4
Debug: check_command write compressed data to flash after seq 48
Debug: Write loop 0 49 68
Writing at 0x15400d... (73%)
Debug: flash_defl_block dc 72
Debug: check_command write compressed data to flash after seq 49
Debug: Write loop 0 50 68
Writing at 0x1595c3... (75%)
Debug: flash_defl_block 7a eb
Debug: check_command write compressed data to flash after seq 50
Debug: Write loop 0 51 68
Writing at 0x2152bd... (76%)
Debug: flash_defl_block b 14
Debug: check_command write compressed data to flash after seq 51
Debug: Write loop 0 52 68
Writing at 0x231388... (77%)
Debug: flash_defl_block 1 2b
Debug: check_command write compressed data to flash after seq 52
Debug: Write loop 0 53 68
Writing at 0x245d0b... (79%)
Debug: flash_defl_block 6d a8
Debug: check_command write compressed data to flash after seq 53
Debug: Write loop 0 54 68
Writing at 0x2609af... (80%)
Debug: flash_defl_block 85 a6
Debug: check_command write compressed data to flash after seq 54
Debug: Write loop 0 55 68
Writing at 0x268b00... (82%)
Debug: flash_defl_block bf fd
Debug: check_command write compressed data to flash after seq 55
Debug: Write loop 0 56 68
Writing at 0x270e90... (83%)
Debug: flash_defl_block 8c d
Debug: check_command write compressed data to flash after seq 56
Debug: Write loop 0 57 68
Writing at 0x279559... (85%)
Debug: flash_defl_block 85 ba
Debug: check_command write compressed data to flash after seq 57
Debug: Write loop 0 58 68
Writing at 0x2816d2... (86%)
Debug: flash_defl_block ab 97
Debug: check_command write compressed data to flash after seq 58
Debug: Write loop 0 59 68
Writing at 0x289d25... (88%)
Debug: flash_defl_block 53 64
Debug: check_command write compressed data to flash after seq 59
Debug: Write loop 0 60 68
Writing at 0x2922c5... (89%)
Debug: flash_defl_block a6 59
Debug: check_command write compressed data to flash after seq 60
Debug: Write loop 0 61 68
Writing at 0x29a72d... (91%)
Debug: flash_defl_block 3e 4f
Debug: check_command write compressed data to flash after seq 61
Debug: Write loop 0 62 68
Writing at 0x2a2875... (92%)
Debug: flash_defl_block 88 ba
Debug: check_command write compressed data to flash after seq 62
Debug: Write loop 0 63 68
Writing at 0x2aaaf2... (94%)
Debug: flash_defl_block 43 c9
Debug: check_command write compressed data to flash after seq 63
Debug: Write loop 0 64 68
Writing at 0x2b2f7e... (95%)
Debug: flash_defl_block c1 a8
Debug: check_command write compressed data to flash after seq 64
Debug: Write loop 0 65 68
Writing at 0x2bb3ff... (97%)
Debug: flash_defl_block ce bf
Debug: check_command write compressed data to flash after seq 65
Debug: Write loop 0 66 68
Writing at 0x2c3887... (98%)
Debug: flash_defl_block 37 5a
Debug: check_command write compressed data to flash after seq 66
Debug: Write loop 0 67 68
Writing at 0x2cbd3e... (100%)
Debug: flash_defl_block 7e d5
Debug: check_command write compressed data to flash after seq 67
Wrote 4128768 bytes (1103224 compressed) at 0x0 in 30.754 seconds.
Debug: check_command calculate md5sum
Hash of data verified.
Leaving...
Debug: flash begin 0 0 16384 0 0
Debug: check_command enter Flash download mode
Debug: check_command leave compressed flash mode
Can anyone suggest what I am doing wrong or what I should try? All of the wiring has been checked over and the ribbon cable from the Firebeetle to the display is okay. I can't see any mistakes. I have also tried with another set(Firebeetle and display) and have the same result.
Beta Was this translation helpful? Give feedback.
All reactions