The use in Station Mode does not meet expectations

[GrooveWJH]

Network Environment

Base Network

• Router : 192.168.110.1
• macOS IP : 192.168.110.19
• esp IP : 192.168.110.18 (ping is OK)

Mavlink bridge setting

• Station IP : 192.168.110.18
• Station Gateway : 192.168.110.1
• Station Subnet : 255.255.255.0
• Host Port: 14550
• Client Port: 14555

Problem

What I want to do

I want this telemtry to be on the same local area network as my Mac, so that I can also connect to the network while monitoring drones.

What I met

In QGC,

• Port 14550
• Server Addresses: 192.168.1110.18:14555 and 192.168.1110.18:14550
  This config couldn't help it connect successfully and there was no response (otherwise I wouldn't have created this issue)

What I tried

I tried to check the data outputs of port 14550 and 14555 for 192.168.1110.18 with Wireshark (to be honest, I don't know which port is the source of the data), but the results were very unsatisfactory.