Data Storage on iOS

The protection of sensitive data, such as authentication tokens and private information, is key for mobile security. In this chapter, you'll learn about the iOS APIs for local data storage, and best practices for using them.

Testing Local Data Storage (MSTG-STORAGE-1 and MSTG-STORAGE-2)

As little sensitive data as possible should be saved in permanent local storage. However, in most practical scenarios, at least some user data must be stored. Fortunately, iOS offers secure storage APIs, which allow developers to use the cryptographic hardware available on every iOS device. If these APIs are used correctly, sensitive data and files can be secured via hardware-backed 256-bit AES encryption.

Data Protection API

App developers can leverage the iOS Data Protection APIs to implement fine-grained access control for user data stored in flash memory. The APIs are built on top of the Secure Enclave Processor (SEP), which was introduced with the iPhone 5S. The SEP is a coprocessor that provides cryptographic operations for data protection and key management. A device-specific hardware key-the device UID (Unique ID)-is embedded in the secure enclave, ensuring the integrity of data protection even when the operating system kernel is compromised.

The data protection architecture is based on a hierarchy of keys. The UID and the user passcode key (which is derived from the user's passphrase via the PBKDF2 algorithm) sit at the top of this hierarchy. Together, they can be used to "unlock" so-called class keys, which are associated with different device states (e.g., device locked/unlocked).

Every file stored on the iOS file system is encrypted with its own per-file key, which is contained in the file metadata. The metadata is encrypted with the file system key and wrapped with the class key corresponding to the protection class the app selected when creating the file.

The following illustration shows the iOS Data Protection Key Hierarchy.

Files can be assigned to one of four different protection classes, which are explained in more detail in the iOS Security Guide:

Complete Protection (NSFileProtectionComplete): A key derived from the user passcode and the device UID protects this class key. The derived key is wiped from memory shortly after the device is locked, making the data inaccessible until the user unlocks the device.
Protected Unless Open (NSFileProtectionCompleteUnlessOpen): This protection class is similar to Complete Protection, but, if the file is opened when unlocked, the app can continue to access the file even if the user locks the device. This protection class is used when, for example, a mail attachment is downloading in the background.
Protected Until First User Authentication (NSFileProtectionCompleteUntilFirstUserAuthentication): The file can be accessed as soon as the user unlocks the device for the first time after booting. It can be accessed even if the user subsequently locks the device and the class key is not removed from memory.
No Protection (NSFileProtectionNone): The key for this protection class is protected with the UID only. The class key is stored in "Effaceable Storage", which is a region of flash memory on the iOS device that allows the storage of small amounts of data. This protection class exists for fast remote wiping (immediate deletion of the class key, which makes the data inaccessible).

All class keys except NSFileProtectionNone are encrypted with a key derived from the device UID and the user's passcode. As a result, decryption can happen only on the device itself and requires the correct passcode.

Since iOS 7, the default data protection class is "Protected Until First User Authentication".

The Keychain

The iOS Keychain can be used to securely store short, sensitive bits of data, such as encryption keys and session tokens. It is implemented as an SQLite database that can be accessed through the Keychain APIs only.

On macOS, every user application can create as many Keychains as desired, and every login account has its own Keychain. The structure of the Keychain on iOS is different: only one Keychain is available to all apps. Access to the items can be shared between apps signed by the same developer via the access groups feature of the attribute kSecAttrAccessGroup. Access to the Keychain is managed by the securityd daemon, which grants access according to the app's Keychain-access-groups, application-identifier, and application-group entitlements.

The Keychain API includes the following main operations:

SecItemAdd
SecItemUpdate
SecItemCopyMatching
SecItemDelete

Data stored in the Keychain is protected via a class structure that is similar to the class structure used for file encryption. Items added to the Keychain are encoded as a binary plist and encrypted with a 128-bit AES per-item key in Galois/Counter Mode (GCM). Note that larger blobs of data aren't meant to be saved directly in the Keychain-that's what the Data Protection API is for. You can configure data protection for Keychain items by setting the kSecAttrAccessible key in the call to SecItemAdd or SecItemUpdate. The following configurable accessibility values for kSecAttrAccessible are the Keychain Data Protection classes:

kSecAttrAccessibleAlways: The data in the Keychain item can always be accessed, regardless of whether the device is locked.
kSecAttrAccessibleAlwaysThisDeviceOnly: The data in the Keychain item can always be accessed, regardless of whether the device is locked. The data won't be included in an iCloud or local backup.
kSecAttrAccessibleAfterFirstUnlock: The data in the Keychain item can't be accessed after a restart until the device has been unlocked once by the user.
kSecAttrAccessibleAfterFirstUnlockThisDeviceOnly: The data in the Keychain item can't be accessed after a restart until the device has been unlocked once by the user. Items with this attribute do not migrate to a new device. Thus, after restoring from a backup of a different device, these items will not be present.
kSecAttrAccessibleWhenUnlocked: The data in the Keychain item can be accessed only while the device is unlocked by the user.
kSecAttrAccessibleWhenUnlockedThisDeviceOnly: The data in the Keychain item can be accessed only while the device is unlocked by the user. The data won't be included in an iCloud or local backup.
kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly: The data in the Keychain can be accessed only when the device is unlocked. This protection class is only available if a passcode is set on the device. The data won't be included in an iCloud or local backup.

AccessControlFlags define the mechanisms with which users can authenticate the key (SecAccessControlCreateFlags):

kSecAccessControlDevicePasscode: Access the item via a passcode.
kSecAccessControlBiometryAny: Access the item via one of the fingerprints registered to Touch ID. Adding or removing a fingerprint won't invalidate the item.
kSecAccessControlBiometryCurrentSet: Access the item via one of the fingerprints registered to Touch ID. Adding or removing a fingerprint will invalidate the item.
kSecAccessControlUserPresence: Access the item via either one of the registered fingerprints (using Touch ID) or default to the passcode.

Please note that keys secured by Touch ID (via kSecAccessControlBiometryAny or kSecAccessControlBiometryCurrentSet) are protected by the Secure Enclave: The Keychain holds a token only, not the actual key. The key resides in the Secure Enclave.

Starting with iOS 9, you can do ECC-based signing operations in the Secure Enclave. In that scenario, the private key and the cryptographic operations reside within the Secure Enclave. See the static analysis section for more info on creating the ECC keys. iOS 9 supports only 256-bit ECC. Furthermore, you need to store the public key in the Keychain because it can't be stored in the Secure Enclave. After the key is created, you can use the kSecAttrKeyType to indicate the type of algorithm you want to use the key with.

In case you want to use these mechanisms, it is recommended to test whether the passcode has been set. In iOS 8, you will need to check whether you can read/write from an item in the Keychain protected by the kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly attribute. From iOS 9 onward you can check whether a lock screen is set, using LAContext:

Swift:

public func devicePasscodeEnabled() -> Bool {
    return LAContext().canEvaluatePolicy(.deviceOwnerAuthentication, error: nil)
}

Objective-C:

-(BOOL)devicePasscodeEnabled:(LAContex)context{
  if ([context canEvaluatePolicy:LAPolicyDeviceOwnerAuthentication error:nil]) {
        return true;
    } else {
        creturn false;
    }
}

Keychain Data Persistence

On iOS, when an application is uninstalled, the Keychain data used by the application is retained by the device, unlike the data stored by the application sandbox which is wiped. In the event that a user sells their device without performing a factory reset, the buyer of the device may be able to gain access to the previous user's application accounts and data by reinstalling the same applications used by the previous user. This would require no technical ability to perform.

When assessing an iOS application, you should look for Keychain data persistence. This is normally done by using the application to generate sample data that may be stored in the Keychain, uninstalling the application, then reinstalling the application to see whether the data was retained between application installations. You can also verify persistence by using the iOS security assessment framework Needle to read the Keychain. The following Needle commands demonstrate this procedure:

$ python needle.py
[needle] > use storage/data/keychain_dump
[needle] > run
  {
   "Creation Time" : "Jan 15, 2018, 10:20:02 GMT",
   "Account" : "username",
   "Service" : "",
   "Access Group" : "ABCD.com.test.passwordmngr-test",
   "Protection" : "kSecAttrAccessibleWhenUnlocked",
   "Modification Time" : "Jan 15, 2018, 10:28:02 GMT",
   "Data" : "testUser",
   "AccessControl" : "Not Applicable"
 },
 {
   "Creation Time" : "Jan 15, 2018, 10:20:02 GMT",
   "Account" : "password",
   "Service" : "",
   "Access Group" : "ABCD.com.test.passwordmngr-test,
   "Protection" : "kSecAttrAccessibleWhenUnlocked",
   "Modification Time" : "Jan 15, 2018, 10:28:02 GMT",
   "Data" : "rosebud",
   "AccessControl" : "Not Applicable"
 }

There's no iOS API that developers can use to force wipe data when an application is uninstalled. Instead, developers should take the following steps to prevent Keychain data from persisting between application installations:

When an application is first launched after installation, wipe all Keychain data associated with the application. This will prevent a device's second user from accidentally gaining access to the previous user's accounts. The following Swift example is a basic demonstration of this wiping procedure:

let userDefaults = UserDefaults.standard

if userDefaults.bool(forKey: "hasRunBefore") == false {
    // Remove Keychain items here

    // Update the flag indicator
    userDefaults.set(true, forKey: "hasRunBefore")
    userDefaults.synchronize() // Forces the app to update UserDefaults
}

When developing logout functionality for an iOS application, make sure that the Keychain data is wiped as part of account logout. This will allow users to clear their accounts before uninstalling an application.

Static Analysis

When you have access to the source code of an iOS app, try to spot sensitive data that's saved and processed throughout the app. This includes passwords, secret keys, and personally identifiable information (PII), but it may as well include other data identified as sensitive by industry regulations, laws, and company policies. Look for this data being saved via any of the local storage APIs listed below. Make sure that sensitive data is never stored without appropriate protection. For example, authentication tokens should not be saved in NSUserDefaults without additional encryption.

The encryption must be implemented so that the secret key is stored in the Keychain with secure settings, ideally kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly. This ensures the usage of hardware-backed storage mechanisms. Make sure that the AccessControlFlags are set according to the security policy of the keys in the KeyChain.

Generic examples of using the KeyChain to store, update, and delete data can be found in the official Apple documentation. The official Apple documentation also includes an example of using Touch ID and passcode protected keys.

Here is sample Swift code you can use to create keys (Notice the kSecAttrTokenID as String: kSecAttrTokenIDSecureEnclave: this indicates that we want to use the Secure Enclave directly.):

// private key parameters
let privateKeyParams = [
    kSecAttrLabel as String: "privateLabel",
    kSecAttrIsPermanent as String: true,
    kSecAttrApplicationTag as String: "applicationTag",
] as CFDictionary

// public key parameters
let publicKeyParams = [
    kSecAttrLabel as String: "publicLabel",
    kSecAttrIsPermanent as String: false,
    kSecAttrApplicationTag as String: "applicationTag",
] as CFDictionary

// global parameters
let parameters = [
    kSecAttrKeyType as String: kSecAttrKeyTypeEC,
    kSecAttrKeySizeInBits as String: 256,
    kSecAttrTokenID as String: kSecAttrTokenIDSecureEnclave,
    kSecPublicKeyAttrs as String: publicKeyParams,
    kSecPrivateKeyAttrs as String: privateKeyParams,
] as CFDictionary

var pubKey, privKey: SecKey?
let status = SecKeyGeneratePair(parameters, &pubKey, &privKey)

if status != errSecSuccess {
    // Keys created successfully
}

When checking an iOS app for insecure data storage, consider the following ways to store data because none of them encrypt data by default:

`NSUserDefaults`

The NSUserDefaults class provides a programmatic interface for interacting with the default system. The default system allows an application to customize its behavior according to user preferences. Data saved by NSUserDefaults can be viewed in the application bundle. This class stores data in a plist file, but it's meant to be used with small amounts of data.

File system

NSData: creates static data objects, while NSMutableData creates dynamic data objects. NSData and NSMutableData are typically used for data storage, but they are also useful for distributed objects applications, in which data contained in data objects can be copied or moved between applications. The following are methods used to write NSData objects:
- NSDataWritingWithoutOverwriting
- NSDataWritingFileProtectionNone
- NSDataWritingFileProtectionComplete
- NSDataWritingFileProtectionCompleteUnlessOpen
- NSDataWritingFileProtectionCompleteUntilFirstUserAuthentication
writeToFile: stores data as part of the NSData class
NSSearchPathForDirectoriesInDomains, NSTemporaryDirectory: used to manage file paths
NSFileManager: lets you examine and change the contents of the file system. You can use createFileAtPath to create a file and write to it.

The following example shows how to create a securely encrypted file using the createFileAtPath method:

[[NSFileManager defaultManager] createFileAtPath:[self filePath]
  contents:[@"secret text" dataUsingEncoding:NSUTF8StringEncoding]
  attributes:[NSDictionary dictionaryWithObject:NSFileProtectionComplete
  forKey:NSFileProtectionKey]];

CoreData

Core Data is a framework for managing the model layer of objects in your application. It provides general and automated solutions to common tasks associated with object life cycles and object graph management, including persistence. Core Data can use SQLite as its persistent store, but the framework itself is not a database.

CoreData does not encrypt it's data by default. As part of a research project (iMAS) from the MITRE Corporation, that was focused on open source iOS security controls, an additional encryption layer can be added to CoreData. See the GitHub Repo for more details.

SQLite Databases

The SQLite 3 library must be added to an app if the app is to use SQLite. This library is a C++ wrapper that provides an API for the SQLite commands.

Firebase Real-time Databases

Firebase is a development platform with more than 15 products, and one of them is Firebase Real-time Database. It can be leveraged by application developers to store and sync data with a NoSQL cloud-hosted database. The data is stored as JSON and is synchronized in real-time to every connected client and also remains available even when the application goes offline.

Identifying Misconfigured Firebase Instance

In Jan 2018, Appthority Mobile Threat Team (MTT) performed security research on insecure backend services connecting to mobile applications. They discovered a misconfiguration in Firebase, which is one of the top 10 most popular data stores which could allow attackers to retrieve all the unprotected data hosted on the cloud server. The team performed the research on 2 Million+ mobile applications and found that the around 9% of Android applications and almost half (47%) of iOS apps that connect to a Firebase database were vulnerable.

The misconfigured Firebase instance can be identified by making the following network call:

https://\<firebaseProjectName\>.firebaseio.com/.json

The firebaseProjectName can be retrieved from the property list(.plist) file. For example, PROJECT_ID key stores the corresponding Firebase project name in GoogleService-Info.plist file.

Alternatively, the analysts can use Firebase Scanner, a python script that automates the task above as shown below:

python FirebaseScanner.py -f <commaSeperatedFirebaseProjectNames>

Realm databases

Realm Objective-C and Realm Swift aren't supplied by Apple, but they are still worth noting. They store everything unencrypted, unless the configuration has encryption enabled.

The following example demonstrates how to use encryption with a Realm database:

// Open the encrypted Realm file where getKey() is a method to obtain a key from the Keychain or a server
let config = Realm.Configuration(encryptionKey: getKey())
do {
  let realm = try Realm(configuration: config)
  // Use the Realm as normal
} catch let error as NSError {
  // If the encryption key is wrong, `error` will say that it's an invalid database
  fatalError("Error opening realm: \(error)")
}

Couchbase Lite Databases

Couchbase Lite is a lightweight, embedded, document-oriented (NoSQL) database engine that can be synced. It compiles natively for iOS and macOS.

YapDatabase

YapDatabase is a key/value store built on top of SQLite.

Dynamic Analysis

One way to determine whether sensitive information (like credentials and keys) is stored insecurely without leveraging native iOS functions is to analyze the app's data directory. Triggering all app functionality before the data is analyzed is important because the app may store sensitive data only after specific functionality has been triggered. You can then perform static analysis for the data dump according to generic keywords and app-specific data.

The following steps can be used to determine how the application stores data locally on a jailbroken iOS device:

Trigger the functionality that stores potentially sensitive data.
Connect to the iOS device and navigate to its Bundle directory (this applies to iOS versions 8.0 and above): /var/mobile/Containers/Data/Application/$APP_ID/
Execute grep with the data that you've stored, for example: grep -iRn "USERID".
If the sensitive data is stored in plaintext, the app fails this test.

You can analyze the app's data directory on a non-jailbroken iOS device by using third-party applications, such as iMazing.

Trigger the functionality that stores potentially sensitive data.
Connect the iOS device to your workstation and launch iMazing.
Select "Apps", right-click the desired iOS application, and select "Extract App".
Navigate to the output directory and locate $APP_NAME.imazing. Rename it $APP_NAME.zip.
Unpack the ZIP file. You can then analyze the application data.

Note that tools like iMazing don't copy data directly from the device. They try to extract data from the backups they create. Therefore, getting all the app data that's stored on the iOS device is impossible: not all folders are included in backups. Use a jailbroken device or repackage the app with Frida and use a tool like objection to access all the data and files.

If you added the Frida library to the app and repackaged it as described in "Dynamic Analysis on Non-Jailbroken Devices" (from the "Tampering and Reverse Engineering on iOS" chapter), you can use objection to transfer files directly from the app's data directory or read files in objection as explained in the chapter "Basic Security Testing on iOS", section "Host-Device Data Transfer".

The Keychain contents can be dumped during dynamic analysis. On a jailbroken device, you can use Keychain dumper as described in the chapter "Basic Security Testing on iOS".

The path to the Keychain file is

/private/var/Keychains/keychain-2.db

On a non-jailbroken device, you can use objection to dump the Keychain items created and stored by the app.

Dynamic Analysis with Xcode and iOS simulator

This test is only available on macOS, as Xcode and the iOS simulator is needed.

For testing the local storage and verifying what data is stored within it, it's not mandatory to have an iOS device. With access to the source code and Xcode the app can be build and deployed in the iOS simulator. The file system of the current device of the iOS simulator is available in ~/Library/Developer/CoreSimulator/Devices.

Once the app is running in the iOS simulator, you can navigate to the directory of the latest simulator started with the following command:

$ cd ~/Library/Developer/CoreSimulator/Devices/$(
ls -alht ~/Library/Developer/CoreSimulator/Devices | head -n 2 |
awk '{print $9}' | sed -n '1!p')/data/Containers/Data/Application

The command above will automatically find the UUID of the latest simulator started. Now you still need to grep for your app name or a keyword in your app. This will show you the UUID of the app.

$ grep -iRn keyword .

Then you can monitor and verify the changes in the filesystem of the app and investigate if any sensitive information is stored within the files while using the app.

Dynamic Analysis with Needle

On a jailbroken device, you can use the iOS security assessment framework Needle to find vulnerabilities caused by the application's data storage mechanism.

Reading the Keychain

To use Needle to read the Keychain, execute the following command:

[needle] > use storage/data/keychain_dump
[needle][keychain_dump] > run

Searching for Binary Cookies

iOS applications often store binary cookie files in the application sandbox. Cookies are binary files containing cookie data for application WebViews. You can use Needle to convert these files to a readable format and inspect the data. Use the following Needle module, which searches for binary cookie files stored in the application container, lists their data protection values, and gives the user the options to inspect or download the file:

[needle] > use storage/data/files_binarycookies
[needle][files_binarycookies] > run

Searching for Property List Files

iOS applications often store data in property list (plist) files that are stored in both the application sandbox and the IPA package. Sometimes these files contain sensitive information, such as usernames and passwords; therefore, the contents of these files should be inspected during iOS assessments. Use the following Needle module, which searches for plist files stored in the application container, lists their data protection values, and gives the user the options to inspect or download the file:

[needle] > use storage/data/files_plist
[needle][files_plist] > run

Searching for Cache Databases

iOS applications can store data in cache databases. These databases contain data such as web requests and responses. Sometimes the data is sensitive. Use the following Needle module, which searches for cache files stored in the application container, lists their data protection values, and gives the user the options to inspect or download the file:

[needle] > use storage/data/files_cachedb
[needle][files_cachedb] > run

Searching for SQLite Databases

iOS applications typically use SQLite databases to store data required by the application. Testers should check the data protection values of these files and their contents for sensitive data. Use the following Needle module, which searches for SQLite databases stored in the application container, lists their data protection values, and gives the user the options to inspect or download the file:

[needle] > use storage/data/files_sql
[needle][files_sql] >

Checking Logs for Sensitive Data (MSTG-STORAGE-3)

There are many legitimate reasons for creating log files on a mobile device, including keeping track of crashes or errors that are stored locally while the device is offline (so that they can be sent to the app's developer once online), and storing usage statistics. However, logging sensitive data, such as credit card numbers and session information, may expose the data to attackers or malicious applications. Log files can be created in several ways. The following list shows the methods available on iOS:

NSLog Method
printf-like function
NSAssert-like function
Macro

Static Analysis

Use the following keywords to check the app's source code for predefined and custom logging statements:

For predefined and built-in functions:
- NSLog
- NSAssert
- NSCAssert
- fprintf
For custom functions:
- Logging
- Logfile

A generalized approach to this issue is to use a define to enable NSLog statements for development and debugging, then disable them before shipping the software. You can do this by adding the following code to the appropriate PREFIX_HEADER (*.pch) file:

#ifdef DEBUG
#   define NSLog (...) NSLog(__VA_ARGS__)
#else
#   define NSLog (...)
#endif

Dynamic Analysis

In the section "Monitoring System Logs" of the chapter "iOS Basic Security Testing" various methods for checking the device logs are explained. Navigate to a screen that displays input fields that take sensitive user information.

After starting one of the methods, fill in the input fields. If sensitive data is displayed in the output, the app fails this test.

Determining Whether Sensitive Data Is Sent to Third Parties (MSTG-STORAGE-4)

Various third-party services can be embedded in the app. The features these services provide can involve tracking services to monitor the user's behavior while using the app, selling banner advertisements, or improving the user experience. The downside to third-party services is that developers don't know the details of the code executed via third-party libraries. Consequently, no more information than is necessary should be sent to a service, and no sensitive information should be disclosed.

The downside is that a developer doesn’t know in detail what code is executed via 3rd party libraries and therefore giving up visibility. Consequently it should be ensured that not more than the information needed is sent to the service and that no sensitive information is disclosed.

Most third-party services are implemented in two ways:

with a standalone library
with a full SDK

Static Analysis

To determine whether API calls and functions provided by the third-party library are used according to best practices, review their source code.

All data that's sent to third-party services should be anonymized to prevent exposure of PII (Personal Identifiable Information) that would allow the third party to identify the user account. No other data (such as IDs that can be mapped to a user account or session) should be sent to a third party.

Dynamic Analysis

All requests made to external services should be analyzed for embedded sensitive information. By using an interception proxy, you can investigate the traffic between the app and the third party's endpoints. When the app is in use, all requests that don't go directly to the server that hosts the main function should be checked for sensitive information that's sent to a third party. This information could be PII in a request to a tracking or ad service.

Finding Sensitive Data in the Keyboard Cache (MSTG-STORAGE-5)

Several options for simplifying keyboard input are available to users. These options include autocorrection and spell checking. Most keyboard input is cached by default, in /private/var/mobile/Library/Keyboard/dynamic-text.dat.

The UITextInputTraits protocol is used for keyboard caching. The UITextField, UITextView, and UISearchBar classes automatically support this protocol and it offers the following properties:

var autocorrectionType: UITextAutocorrectionType determines whether autocorrection is enabled during typing. When autocorrection is enabled, the text object tracks unknown words and suggests suitable replacements, replacing the typed text automatically unless the user overrides the replacement. The default value of this property is UITextAutocorrectionTypeDefault, which for most input methods enables autocorrection.
var secureTextEntry: BOOL determines whether text copying and text caching are disabled and hides the text being entered for UITextField. The default value of this property is NO.

Static Analysis

Search through the source code for similar implementations, such as

  textObject.autocorrectionType = UITextAutocorrectionTypeNo;
  textObject.secureTextEntry = YES;

Open xib and storyboard files in the Interface Builder of Xcode and verify the states of Secure Text Entry and Correction in the Attributes Inspector for the appropriate object.

The application must prevent the caching of sensitive information entered into text fields. You can prevent caching by disabling it programmatically, using the textObject.autocorrectionType = UITextAutocorrectionTypeNo directive in the desired UITextFields, UITextViews, and UISearchBars. For data that should be masked, such as PINs and passwords, set textObject.secureTextEntry to YES.

UITextField *textField = [ [ UITextField alloc ] initWithFrame: frame ];
textField.autocorrectionType = UITextAutocorrectionTypeNo;

Dynamic Analysis

If a jailbroken iPhone is available, execute the following steps:

Reset your iOS device keyboard cache by navigating to Settings > General > Reset > Reset Keyboard Dictionary.
Use the application and identify the functionalities that allow users to enter sensitive data.
Dump the keyboard cache file dynamic-text.dat into the following directory (which might be different for iOS versions before 8.0): /private/var/mobile/Library/Keyboard/
Look for sensitive data, such as username, passwords, email addresses, and credit card numbers. If the sensitive data can be obtained via the keyboard cache file, the app fails this test.

With Needle:

[needle] > use storage/caching/keyboard_autocomplete
[needle] > run

[*] Checking connection with device...
[+] Already connected to: 142.16.24.31
[*] Running strings over keyboard autocomplete databases...
[+] The following content has been found:
    DynamicDictionary-5
    check
    darw
    Frida
    frid
    gawk
    iasdasdt11
    installdeopbear
    Minh
    mter
    needle
    openssl
    openss
    produce
    python
    truchq
    wallpaper
    DynamicDictionary-5
[*] Saving output to file: /home/phanvanloc/.needle/output/keyboard_autocomplete.txt

UITextField *textField = [ [ UITextField alloc ] initWithFrame: frame ];
textField.autocorrectionType = UITextAutocorrectionTypeNo;

If you must use a non-jailbroken iPhone:

Reset the keyboard cache.
Key in all sensitive data.
Use the app again and determine whether autocorrect suggests previously entered sensitive information.

Determining Whether Sensitive Data Is Exposed via IPC Mechanisms (MSTG-STORAGE-6)

Overview

Inter Process Communication (IPC) allows processes to send each other messages and data. For processes that need to communicate with each other, there are different ways to implement IPC on iOS:

XPC Services: XPC is a structured, asynchronous library that provides basic interprocess communication. It is managed by launchd. It is the most secure and flexible implementation of IPC on iOS and should be the preferred method. It runs in the most restricted environment possible: sandboxed with no root privilege escalation and minimal file system access and network access. Two different APIs are used with XPC Services:
- NSXPCConnection API
- XPC Services API
Mach Ports: All IPC communication ultimately relies on the Mach Kernel API. Mach Ports allow local communication (intra-device communication) only. They can be implemented either natively or via Core Foundation (CFMachPort) and Foundation (NSMachPort) wrappers.
NSFileCoordinator: The class NSFileCoordinator can be used to manage and send data to and from apps via files that are available on the local file system to various processes. NSFileCoordinator methods run synchronously, so your code will be blocked until they stop executing. That's convenient because you don't have to wait for an asynchronous block callback, but it also means that the methods block the running thread.

Static Analysis

The following section summarizes keywords that you should look for to identify IPC implementations within iOS source code.

XPC Services

Several classes may be used to implement the NSXPCConnection API:

NSXPCConnection
NSXPCInterface
NSXPCListener
NSXPCListenerEndpoint

You can set security attributes for the connection. The attributes should be verified.

Check for the following two files in the Xcode project for the XPC Services API (which is C-based):

xpc.h
connection.h

Mach Ports

Keywords to look for in low-level implementations:

mach_port_t
mach_msg_*

Keywords to look for in high-level implementations (Core Foundation and Foundation wrappers):

CFMachPort
CFMessagePort
NSMachPort
NSMessagePort

NSFileCoordinator

Keywords to look for:

NSFileCoordinator

Dynamic Analysis

Verify IPC mechanisms with static analysis of the iOS source code. No iOS tool is currently available to verify IPC usage.

Checking for Sensitive Data Disclosed Through the User Interface (MSTG-STORAGE-7)

Overview

Entering sensitive information when, for example, registering an account or making payments, is an essential part of using many apps. This data may be financial information such as credit card data or user account passwords. The data may be exposed if the app doesn't properly mask it while it is being typed.

Masking sensitive data (by showing asterisks or dots instead of clear text) should be enforced.

Static Analysis

A text field that masks its input can be configured in two ways:

Storyboard In the iOS project's storyboard, navigate to the configuration options for the text field that takes sensitive data. Make sure that the option "Secure Text Entry" is selected. If this option is activated, dots are shown in the text field in place of the text input.

Source Code If the text field is defined in the source code, make sure that the option isSecureTextEntry is set to "true". This option obscures the text input by showing dots.

sensitiveTextField.isSecureTextEntry = true

Dynamic Analysis

To determine whether the application leaks any sensitive information to the user interface, run the application and identify components that either show such information or take it as input.

If the information is masked by, for example, asterisks or dots, the app isn't leaking data to the user interface.

Testing Backups for Sensitive Data (MSTG-STORAGE-8)

Overview

iOS includes auto-backup features that create copies of the data stored on the device. You can make iOS backups from your host computer by using iTunes (till macOS Catalina) or Finder (from macOS Catalina onwards), or via the iCloud backup feature. In both cases, the backup includes nearly all data stored on the iOS device except highly sensitive data such as Apple Pay information and Touch ID settings.

Since iOS backs up installed apps and their data, an obvious concern is whether sensitive user data stored by the app might unintentionally leak through the backup. Another concern, though less obvious, is whether sensitive configuration settings used to protect data or restrict app functionality could be tampered to change app behavior after restoring a modified backup. Both concerns are valid and these vulnerabilities have proven to exist in a vast number of apps today.

How the Keychain Is Backed Up

When users back up their iOS device, the Keychain data is backed up as well, but the secrets in the Keychain remain encrypted. The class keys necessary to decrypt the Keychain data aren't included in the backup. Restoring the Keychain data requires restoring the backup to a device and unlocking the device with the users passcode.

Keychain items for which the kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly attribute is set can be decrypted only if the backup is restored to the backed up device. Someone trying to extract this Keychain data from the backup couldn't decrypt it without access to the crypto hardware inside the originating device.

One caveat to using the Keychain, however, is that it was only designed to store small bits of user data or short notes (according to Apple's documenation on Keychain Services). This means that apps with larger local secure storage needs (e.g., messaging apps, etc.) should encrypt the data within the app container, but use the Keychain to store key material. In cases where sensitive configuration settings (e.g., data loss prevention policies, password policies, compliance policies, etc) must remain unencrypted within the app container, you can consider storing a hash of the policies in the keychain for integrity checking. Without an integrity check, these settings could be modified within a backup and then restored back to the device to modify app behavior (e.g., change configured remote endpoints) or security settings (e.g., jailbreak detection, certificate pinning, maximum UI login attempts, etc.).

The takeaway: If sensitive data is handled as recommended earlier in this chapter (e.g., stored in the Keychain, with Keychain backed integrity checks, or encrypted with a key that's locked inside the Keychain), backups shouldn't be security issue.

Static Analysis

A backup of a device on which a mobile application has been installed will include all subdirectories (except for Library/Caches/) and files in the app's private directory.

Therefore, avoid storing sensitive data in plaintext within any of the files or folders that are in the app's private directory or subdirectories.

Although all the files in Documents/ and Library/Application Support/ are always backed up by default, you can exclude files from the backup by calling NSURL setResourceValue:forKey:error: with the NSURLIsExcludedFromBackupKey key.

You can use the NSURLIsExcludedFromBackupKey and CFURLIsExcludedFromBackupKey file system properties to exclude files and directories from backups. An app that needs to exclude many files can do so by creating its own subdirectory and marking that directory excluded. Apps should create their own directories for exclusion instead of excluding system-defined directories.

Both file system properties are preferable to the deprecated approach of directly setting an extended attribute. All apps running on iOS version 5.1 and later should use these properties to exclude data from backups.

The following is sample Objective-C code for excluding a file from a backup on iOS 5.1 and later:

- (BOOL)addSkipBackupAttributeToItemAtPath:(NSString *) filePathString
{
    NSURL* URL= [NSURL fileURLWithPath: filePathString];
    assert([[NSFileManager defaultManager] fileExistsAtPath: [URL path]]);

    NSError *error = nil;
    BOOL success = [URL setResourceValue: [NSNumber numberWithBool: YES]
                                  forKey: NSURLIsExcludedFromBackupKey error: &error];
    if(!success){
        NSLog(@"Error excluding %@ from backup %@", [URL lastPathComponent], error);
    }
    return success;
}

The following is sample Swift code for excluding a file from a backup on iOS 5.1 and later, see Swift excluding files from iCloud backup for more information:

enum ExcludeFileError: Error {
    case fileDoesNotExist
    case error(String)
}

func excludeFileFromBackup(filePath: URL) -> Result<Bool, ExcludeFileError> {
    var file = filePath

    do {
        if FileManager.default.fileExists(atPath: file.path) {
            var res = URLResourceValues()
            res.isExcludedFromBackup = true
            try file.setResourceValues(res)
            return .success(true)

        } else {
            return .failure(.fileDoesNotExist)
        }
    } catch {
        return .failure(.error("Error excluding \(file.lastPathComponent) from backup \(error)"))
    }
}

Dynamic Analysis

In order to test the backup, you obviously need to create one first. The most common way to create a backup of an iOS device is by using iTunes, which is available for Windows, Linux and of course macOS (till macOS Mojave). When creating a backup via iTunes you can always only backup the whole device and not select just a single app. Make sure that the option "Encrypt local backup" in iTunes is not set, so that the backup is stored in cleartext on your hard drive.

iTunes is not available anymore from macOS Catalina onwards. Managing of an iOS device, including updates, backup and restore has been moved to the Finder app. The approach remains the same, as described above.

After the iOS device has been backed up, you need to retrieve the file path of the backup, which are different locations on each OS. The official Apple documentation will help you to locate backups of your iPhone, iPad, and iPod touch.

When you want to navigate to the backup folder up to High Sierra you can easily do so. Starting with macOS Mojave you will get the following error (even as root):

$ pwd
/Users/foo/Library/Application Support
$ ls -alh MobileSync
ls: MobileSync: Operation not permitted

This is not a permission issue of the backup folder, but a new feature in macOS Mojave. You can solve this problem by granting full disk access to your terminal application by following the explanation on OSXDaily.

Before you can access the directory you need to select the folder with the UDID of your device. Check the section "Getting the UDID of an iOS device" in the "iOS Basic Security Testing" chapter on how to retrieve the UDID.

Once you know the UDID you can navigate into this directory and you will find the full backup of the whole device, which does include pictures, app data and whatever might have been stored on the device.

Review the data that's in the backed up files and folders. The structure of the directories and file names is obfuscated and will look like this:

$ pwd
/Users/foo/Library/Application Support/MobileSync/Backup/416f01bd160932d2bf2f95f1f142bc29b1c62dcb/00
$ ls | head -n 3
000127b08898088a8a169b4f63b363a3adcf389b
0001fe89d0d03708d414b36bc6f706f567b08d66
000200a644d7d2c56eec5b89c1921dacbec83c3e

Therefore, it's not straightforward to navigate through it and you will not find any hints of the app you want to analyze in the directory or file name. You can consider using the iMazing shareware utility to assist here. Perform a device backup with iMazing and use its built-in backup explorer to easily analyze app container contents including original paths and file names.

Without iMazing or similar software you may need to resort to using grep to identify sensitive data. This is not the most thorough approach but you can try searching for sensitive data that you have keyed in while using the app before you made the backup. For example: the username, password, credit card data, PII or any data that is considered sensitive in the context of the app.

$ ~/Library/Application Support/MobileSync/Backup/<UDID>
$ grep -iRn "password" .

As described in the Static Analysis section, any sensitive data that you're able to find should be excluded from the backup, encrypted properly by using the Keychain or not stored on the device in the first place.

In case you need to work with an encrypted backup, there are some Python scripts in DinoSec's GitHub repo, such as backup_tool.py and backup_passwd.py, that will serve as a good starting point. However, note that they might not work with the latest iTunes/Finder versions and might need to be tweaked.

Proof of Concept: Removing UI Lock with Tampered Backup

As discussed earlier, sensitive data is not limited to just user data and PII. It can also be configuration or settings files that affect app behavior, restrict functionality, or enable security controls. If you take a look at the open source bitcoin wallet app, Bither, you'll see that it's possible to configure a PIN to lock the UI. And after a few easy steps, you will see how to bypass this UI lock with a modified backup on a non-jailbroken device.

After you enable the pin, use iMazing to perform a device backup:

Select your device from the list under the AVAILABLE menu.
Click the top menu option Back Up.
Follow prompts to complete the backup using defaults.

Next you can open the backup to view app container files within your target app:

Select your device and click Backups on the top right menu.
Click the backup you created and select View.
Navigate to the Bither app from the Apps directory.

At this point you can view all the backed up content for Bither.

This is where you can begin parsing through the files looking for sensitive data. In the screenshot you'll see the net.bither.plist file which contains the pin_code attribute. To remove the UI lock restriction, simply delete the pin_code attribute and save the changes.

From there it's possible to easily restore the modified version of net.bither.plist back onto the device using the licensed version of iMazing.

The free workaround, however, is to find the plist file in the obfuscated backup generated by iTunes/Finder. So create your backup of the device with Bither's PIN code configured. Then, using the steps described earlier, find the backup directory and grep for "pin_code" as shown below.

$ ~/Library/Application Support/MobileSync/Backup/<UDID>
$ grep -iRn "pin_code" .
Binary file ./13/135416dd5f251f9251e0f07206277586b7eac6f6 matches

You'll see there was a match on a binary file with an obfuscated name. This is your net.bither.plist file. Go ahead and rename the file giving it a plist extension so Xcode can easily open it up for you.

Again, remove the pin_code attribute from the plist and save your changes. Rename the file back to the original name (i.e., without the plist extension) and perform your backup restore. When the restore is complete you'll see that Bither no longer prompts you for the PIN code when launched.

Testing Auto-Generated Screenshots for Sensitive Information (MSTG-STORAGE-9)

Overview

Manufacturers want to provide device users with an aesthetically pleasing effect when an application is started or exited, so they introduced the concept of saving a screenshot when the application goes into the background. This feature can pose a security risk because screenshots (which may display sensitive information such as an email or corporate documents) are written to local storage, where they can be recovered by a rogue application with a sandbox bypass exploit or someone who steals the device.

Static Analysis

While analyzing the source code, look for the fields or screens that take or display sensitive data. Use UIImageView to determine whether the application sanitizes the screen before being backgrounded.

The following is a sample remediation method that will set a default screenshot:

@property (UIImageView *)backgroundImage;

- (void)applicationDidEnterBackground:(UIApplication *)application {
    UIImageView *myBanner = [[UIImageView alloc] initWithImage:@"overlayImage.png"];
    self.backgroundImage = myBanner;
    [self.window addSubview:myBanner];
}

This sets the background image to overlayImage.png whenever the application is backgrounded. It prevents sensitive data leaks because overlayImage.png will always override the current view.

Dynamic Analysis

Navigate to an application screen that displays sensitive information, such as a username, an email address, or account details. Background the application by hitting the Home button on your iOS device. Connect to the iOS device and navigate to the following directory (which may be different for iOS versions below 8.0):

/var/mobile/Containers/Data/Application/$APP_ID/Library/Caches/Snapshots/

Screenshot caching vulnerabilities can also be detected with Needle. This is demonstrated in the following Needle excerpt:

[needle] > use storage/caching/screenshot
[needle][screenshot] > run
[V] Creating timestamp file...
[*] Launching the app...
[*] Background the app by hitting the home button, then press enter:

[*] Checking for new screenshots...
[+] Screenshots found:
[+]   /private/var/mobile/Containers/Data/Application/APP_ID/Library/Caches/Snapshots/app_name/B75DD942-76D1-4B86-8466-B79F7A78B437@2x.png
[+]   /private/var/mobile/Containers/Data/Application/APP_ID/Library/Caches/Snapshots/app_name/downscaled/12B93BCB-610B-44DA-A171-AF205BA71269@2x.png
[+] Retrieving screenshots and saving them in: /home/user/.needle/output

If the application caches the sensitive information in a screenshot, the app fails this test.

The application should show a default image as the top view element when the application enters the background, so that the default image will be cached and not the sensitive information that was displayed.

Testing Memory for Sensitive Data (MSTG-STORAGE-10)

Overview

Analyzing memory can help developers to identify the root causes of problems such as application crashes. However, it can also be used to access to sensitive data. This section describes how to check process' memory for data disclosure.

First, identify the sensitive information that's stored in memory. Sensitive assets are very likely to be loaded into memory at some point. The objective is to make sure that this info is exposed as briefly as possible.

To investigate an application's memory, first create a memory dump. Alternatively, you can analyze the memory in real time with, for example, a debugger. Regardless of the method you use, this is a very error-prone process because dumps provide the data left by executed functions and you might miss executing critical steps. In addition, overlooking data during analysis is quite easy to do unless you know the footprint of the data you're looking for (either its exact value or its format). For example, if the app encrypts according to a randomly generated symmetric key, you're very unlikely to spot the key in memory unless you find its value by other means.

Therefore, you're better off starting with static analysis.

Static Analysis

Before looking into the source code, checking the documentation and identifying application components provide an overview of where data might be exposed. For example, while sensitive data received from a backend exists in the final model object, multiple copies may also exist in the HTTP client or the XML parser. All these copies should be removed from memory as soon as possible.

Understanding the application's architecture and its interaction with the OS will help you identify sensitive information that doesn't have to be exposed in memory at all. For example, assume your app receives data from one server and transfers it to another without needing any additional processing. That data can be received and handled in encrypted form, which prevents exposure via memory.

However, if sensitive data does need to be exposed via memory, make sure that your app exposes as few copies of this data as possible for as little time as possible. In other words, you want centralized handling of sensitive data, based on primitive and mutable data structures.

Such data structures give developers direct access to memory. Make sure that this access is used to overwrite the sensitive data with dummy data (which is typically zeroes). Examples of preferable data types include char [] and int [], but not NSString or String. Whenever you try to modify an immutable object, such as a String, you actually create a copy and change the copy.

Avoid Swift data types other than collections regardless of whether they are considered mutable. Many Swift data types hold their data by value, not by reference. Although this allows modification of the memory allocated to simple types like char and int, handling a complex type such as String by value involves a hidden layer of objects, structures, or primitive arrays whose memory can't be directly accessed or modified. Certain types of usage may seem to create a mutable data object (and even be documented as doing so), but they actually create a mutable identifier (variable) instead of an immutable identifier (constant). For example, many think that the following results in a mutable String in Swift, but this is actually an example of a variable whose complex value can be changed (replaced, not modified in place):

var str1 = "Goodbye"              // "Goodbye", base address:            0x0001039e8dd0
str1.append(" ")                 // "Goodbye ", base address:            0x608000064ae0
str1.append("cruel world!")      // "Goodbye cruel world", base address: 0x6080000338a0
str1.removeAll()                 // "", base address                    0x00010bd66180

Notice that the base address of the underlying value changes with each string operation. Here is the problem: To securely erase the sensitive information from memory, we don't want to simply change the value of the variable; we want to change the actual content of the memory allocated for the current value. Swift doesn't offer such a function.

Swift collections (Array, Set, and Dictionary), on the other hand, may be acceptable if they collect primitive data types such as char or int and are defined as mutable (i.e., as variables instead of constants), in which case they are more or less equivalent to a primitive array (such as char []). These collections provide memory management, which can result in unidentified copies of the sensitive data in memory if the collection needs to copy the underlying buffer to a different location to extend it.

Using mutable Objective-C data types, such as NSMutableString, may also be acceptable, but these types have the same memory issue as Swift collections. Pay attention when using Objective-C collections; they hold data by reference, and only Objective-C data types are allowed. Therefore, we are looking, not for a mutable collection, but for a collection that references mutable objects.

As we've seen so far, using Swift or Objective-C data types requires a deep understanding of the language implementation. Furthermore, there has been some core re-factoring in between major Swift versions, resulting in many data types' behavior being incompatible with that of other types. To avoid these issues, we recommend using primitive data types whenever data needs to be securely erased from memory.

Unfortunately, few libraries and frameworks are designed to allow sensitive data to be overwritten. Not even Apple considers this issue in the official iOS SDK API. For example, most of the APIs for data transformation (passers, serializes, etc.) operate on non-primitive data types. Similarly, regardless of whether you flag some UITextField as Secure Text Entry or not, it always returns data in the form of a String or NSString.

In summary, when performing static analysis for sensitive data exposed via memory, you should

try to identify application components and map where the data is used,
make sure that sensitive data is handled with as few components as possible,
make sure that object references are properly removed once the object containing sensitive data is no longer needed,
make sure that highly sensitive data is overwritten as soon as it is no longer needed,
not pass such data via immutable data types, such as String and NSString,
avoid non-primitive data types (because they might leave data behind),
overwrite the value in memory before removing references,
pay attention to third-party components (libraries and frameworks). Having a public API that handles data according to the recommendations above is a good indicator that developers considered the issues discussed here.

Dynamic Analysis

There are several approaches and tools available for dynamically testing the memory of an iOS app for sensitive data.

Retrieving and Analyzing a Memory Dump

Wether you are using a jailbroken or a non-jailbroken device, you can dump the app's process memory with objection and Fridump. You can find a detailed explanation of this process in the section "Memory Dump", in the chapter "Tampering and Reverse Engineering on iOS".

After the memory has been dumped (e.g. to a file called "memory"), depending on the nature of the data you're looking for, you'll need a set of different tools to process and analyze that memory dump. For instance, if you're focusing on strings, it might be sufficient for you to execute the command strings or rabin2 -zz to extract those strings.

# using strings
$ strings memory > strings.txt

# using rabin2
$ rabin2 -ZZ memory > strings.txt

Open strings.txt in your favorite editor and dig through it to identify sensitive information.

However if you'd like to inspect other kind of data, you'd rather want to use radare2 and its search capabilities. See radare2's help on the search command (/?) for more information and a list of options. The following shows only a subset of them:

$ r2 <name_of_your_dump_file>

[0x00000000]> /?
Usage: /[!bf] [arg]  Search stuff (see 'e??search' for options)
|Use io.va for searching in non virtual addressing spaces
| / foo\x00                    search for string 'foo\0'
| /c[ar]                       search for crypto materials
| /e /E.F/i                    match regular expression
| /i foo                       search for string 'foo' ignoring case
| /m[?][ebm] magicfile         search for magic, filesystems or binary headers
| /v[1248] value               look for an `cfg.bigendian` 32bit value
| /w foo                       search for wide string 'f\0o\0o\0'
| /x ff0033                    search for hex string
| /z min max                   search for strings of given size
...

Runtime Memory Analysis

Using r2frida you can analyze and inspect the app's memory while running and without needing to dump it. For example, you may run the previous search commands from r2frida and search the memory for a string, hexadecimal values, etc. When doing so, remember to prepend the search command (and any other r2frida specific commands) with a backslash \ after starting the session with r2 frida://usb//<name_of_your_app>.

For more information, options and approaches, please refer to section "In-Memory Search" in the chapter "Tampering and Reverse Engineering on iOS".

References

OWASP MASVS

MSTG-STORAGE-1: "System credential storage facilities are used appropriately to store sensitive data, such as user credentials or cryptographic keys."
MSTG-STORAGE-2: "No sensitive data should be stored outside of the app container or system credential storage facilities."
MSTG-STORAGE-3: "No sensitive data is written to application logs."
MSTG-STORAGE-4: "No sensitive data is shared with third parties unless it is a necessary part of the architecture."
MSTG-STORAGE-5: "The keyboard cache is disabled on text inputs that process sensitive data."
MSTG-STORAGE-6: "No sensitive data is exposed via IPC mechanisms."
MSTG-STORAGE-7: "No sensitive data, such as passwords or pins, is exposed through the user interface."
MSTG-STORAGE-8: "No sensitive data is included in backups generated by the mobile operating system."
MSTG-STORAGE-9: "The app removes sensitive data from views when moved to the background."
MSTG-STORAGE-10: "The app does not hold sensitive data in memory longer than necessary, and memory is cleared explicitly after use."

Tools

Fridump - https://github.com/Nightbringer21/fridump
Objection - https://github.com/sensepost/objection
OWASP ZAP - https://www.owasp.org/index.php/OWASP_Zed_Attack_Proxy_Project
Burp Suite - https://portswigger.net/burp
Firebase Scanner - https://github.com/shivsahni/FireBaseScanner

Others

Appthority Mobile Threat Team Research Paper - https://cdn2.hubspot.net/hubfs/436053/Appthority%20Q2-2018%20MTR%20Unsecured%20Firebase%20Databases.pdf
[#mandt] Tarjei Mandt, Mathew Solnik and David Wang, Demystifying the Secure Enclave Processor - https://www.blackhat.com/docs/us-16/materials/us-16-Mandt-Demystifying-The-Secure-Enclave-Processor.pdf

Files

0x06d-Testing-Data-Storage.md

Latest commit

History

0x06d-Testing-Data-Storage.md

File metadata and controls

Data Storage on iOS

Testing Local Data Storage (MSTG-STORAGE-1 and MSTG-STORAGE-2)

Data Protection API

The Keychain

Keychain Data Persistence

Static Analysis

NSUserDefaults

File system

CoreData

SQLite Databases

Firebase Real-time Databases

Identifying Misconfigured Firebase Instance

Realm databases

Couchbase Lite Databases

YapDatabase

Dynamic Analysis

Dynamic Analysis with Xcode and iOS simulator

Dynamic Analysis with Needle

Reading the Keychain

Searching for Binary Cookies

Searching for Property List Files

Searching for Cache Databases

Searching for SQLite Databases

Checking Logs for Sensitive Data (MSTG-STORAGE-3)

Static Analysis

Dynamic Analysis

Determining Whether Sensitive Data Is Sent to Third Parties (MSTG-STORAGE-4)

Static Analysis

Dynamic Analysis

Finding Sensitive Data in the Keyboard Cache (MSTG-STORAGE-5)

Static Analysis

Dynamic Analysis

Determining Whether Sensitive Data Is Exposed via IPC Mechanisms (MSTG-STORAGE-6)

Overview

Static Analysis

XPC Services

Mach Ports

NSFileCoordinator

Dynamic Analysis

Checking for Sensitive Data Disclosed Through the User Interface (MSTG-STORAGE-7)

Overview

Static Analysis

Dynamic Analysis

Testing Backups for Sensitive Data (MSTG-STORAGE-8)

Overview

How the Keychain Is Backed Up

Static Analysis

Dynamic Analysis

Proof of Concept: Removing UI Lock with Tampered Backup

Testing Auto-Generated Screenshots for Sensitive Information (MSTG-STORAGE-9)

Overview

Static Analysis

Dynamic Analysis

Testing Memory for Sensitive Data (MSTG-STORAGE-10)

Overview

Static Analysis

Dynamic Analysis

Retrieving and Analyzing a Memory Dump

Runtime Memory Analysis

References

OWASP MASVS

Tools

Others

`NSUserDefaults`